Table of Contents
Journal of Composites
Volume 2014 (2014), Article ID 795984, 10 pages
http://dx.doi.org/10.1155/2014/795984
Research Article

High Strain Rate Compressive Behavior of Polyurethane Resin and Polyurethane/Al2O3 Hollow Sphere Syntactic Foams

1Department of Mechanical and Aerospace Engineering, Polytechnic School of Engineering, New York University, Brooklyn, NY 11201, USA
2Deep Springs Technology, LLC, 4750W, Bancroft Street, Toledo, OH 43615, USA

Received 27 July 2014; Revised 20 September 2014; Accepted 28 September 2014; Published 29 October 2014

Academic Editor: Masamichi Kawai

Copyright © 2014 Dung D. Luong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. A. Shutov, “Syntactic polymer foams,” in Chromatography/Foams/Copolymers, pp. 63–123, Springer, Berlin, Germany, 1986. View at Google Scholar
  2. N. Gupta, D. Pinisetty, and V. Shunmugasamy, Reinforced Polymer Matrix Syntactic Foams Effect of Nano and Micro-Scale Reinforcement, Springer, New York, NY, USA, 2013.
  3. M. Porfiri and N. Gupta, “Effect of volume fraction and wall thickness on the elastic properties of hollow particle filled composites,” Composites Part B: Engineering, vol. 40, no. 2, pp. 166–173, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Bunn and J. T. Mottram, “Manufacture and compression properties of syntactic foams,” Composites, vol. 24, no. 7, pp. 565–571, 1993. View at Publisher · View at Google Scholar · View at Scopus
  5. V. S. Shabde, K. A. Hoo, and G. M. Gladysz, “Experimental determination of the thermal conductivity of three-phase syntactic foams,” Journal of Materials Science, vol. 41, no. 13, pp. 4061–4073, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. V. C. Shunmugasamy, D. Pinisetty, and N. Gupta, “Thermal expansion behavior of hollow glass particle/vinyl ester composites,” Journal of Materials Science, vol. 47, no. 14, pp. 5596–5604, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. N. Gupta and D. Pinisetty, “A review of thermal conductivity of polymer matrix syntactic foams—effect of hollow particle wall thickness and volume fraction,” JOM, vol. 65, no. 2, pp. 234–245, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Zhu, J. Ma, J. Wang, J. Wu, and D. Peng, “Thermal, dielectric and compressive properties of hollow glass microsphere filled epoxy-matrix composites,” Journal of Reinforced Plastics and Composites, vol. 31, no. 19, pp. 1311–1326, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. B. L. Zhu, H. Zheng, J. Wang, J. Ma, J. Wu, and R. Wu, “Tailoring of thermal and dielectric properties of LDPE-matrix composites by the volume fraction, density, and surface modification of hollow glass microsphere filler,” Composites B: Engineering, vol. 58, pp. 91–102, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. V. C. Shunmugasamy, D. Pinisetty, and N. Gupta, “Electrical properties of hollow glass particle filled vinyl ester matrix syntactic foams,” Journal of Materials Science, vol. 49, no. 1, pp. 180–190, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. B. John and C. P. R. Nair, Update on Syntactic Foams, iSmithers Rapra, Shropshire, UK, 2010.
  12. N. Gupta and P. K. Rohatgi, Eds., Metal Matrix Syntactic Foams: Processing, Microstructure, Properties and Applications, DEStech Publications, Lancaster, Pa, USA, 2014.
  13. M. Labella, S. E. Zeltmann, V. C. Shunmugasamy, N. Gupta, and P. K. Rohatgi, “Mechanical and thermal properties of fly ash/vinyl ester syntactic foams,” Fuel, vol. 121, pp. 240–249, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Labella, V. C. Shunmugasamy, O. M. Strbik, and N. Gupta, “Compressive and thermal characterization of syntactic foams containing hollow silicon carbide particles with porous shell,” Journal of Applied Polymer Science, vol. 131, no. 17, pp. 1–5, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. D. D. Luong, O. M. Strbik III, V. H. Hammond, N. Gupta, and K. Cho, “Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates,” Journal of Alloys and Compounds, vol. 550, pp. 412–422, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Licitra, D. D. Luong, O. M. Strbik III, and N. Gupta, “Dynamic properties of alumina hollow particle filled aluminum alloy A356 matrix syntactic foams,” Materials & Design, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Wang, Q. Tang, X. Duan et al., “Effect of modified sepiolite nanofibers and hollow glass microspheres on performance of rigid polyurethane foams composite materials,” Nanoscience and Nanotechnology Letters, vol. 6, no. 6, pp. 524–531, 2014. View at Google Scholar
  18. V. Yakushin, L. Bel'kova, and I. Sevastyanova, “Properties of rigid polyurethane foams filled with glass microspheres,” Mechanics of Composite Materials, vol. 48, no. 5, pp. 579–586, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. R. Deng, P. Davies, and A. K. Bajaj, “Flexible polyurethane foam modelling and identification of viscoelastic parameters for automotive seating applications,” Journal of Sound and Vibration, vol. 262, no. 3, pp. 391–417, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Benli, Ü. Yilmazer, F. Pekel, and S. Özkar, “Effect of fillers on thermal and mechanical properties of polyurethane elastomer,” Journal of Applied Polymer Science, vol. 68, no. 7, pp. 1057–1065, 1998. View at Google Scholar · View at Scopus
  21. X. B. Zhang, J. Y. Chen, Z. H. Gan et al., “Experimental study of moisture uptake of polyurethane foam subjected to a heat sink below 30 K,” Cryogenics, vol. 59, pp. 1–6, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Demharter, “Polyurethane rigid foam, a proven thermal insulating material for applications between +130°C and −196°C,” Cryogenics, vol. 38, no. 1, pp. 113–117, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. N. B. Shelke, R. K. Nagarale, and S. G. Kumbar, “Polyurethanes,” in Natural and Synthetic Biomedical Polymers, S. G. Kumbar, C. T. Laurencin, and M. Deng, Eds., pp. 123–144, Elsevier, Oxford, UK, 2014. View at Google Scholar
  24. P. S. D. Patel, D. E. T. Shepherd, and D. W. L. Hukins, “Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone,” BMC Musculoskeletal Disorders, vol. 9, article 137, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. N. Gupta, D. D. Luong, and P. K. Rohatgi, “A method for intermediate strain rate compression testing and study of compressive failure mechanism of Mg-Al-Zn alloy,” Journal of Applied Physics, vol. 109, no. 10, Article ID 103512, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. D. D. Luong, N. Gupta, A. Daoud, and P. K. Rohatgi, “High strain rate compressive characterization of aluminum alloy/fly ash cenosphere composites,” JOM: Journal of Minerals, Metals and the Materials Society, vol. 63, no. 2, pp. 53–56, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. W. Chen and B. Song, “Conventional Kolsky bars,” in Split Hopkinson (Kolsky) Bar, pp. 1–35, Springer, New York, NY, USA, 2011. View at Google Scholar
  28. B. Song and W. Chen, “Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materials,” Experimental Mechanics, vol. 44, no. 3, pp. 300–312, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. V. Shunmugasamy, S. Zeltmann, N. Gupta, and O. Strbik III, “Compressive characterization of single porous SiC hollow particles,” JOM: Jounal of Minerals, Metals and Materials Society, vol. 66, no. 6, pp. 892–897, 2014. View at Google Scholar
  30. E. Barber, J. Nelson, and W. Beck, “Improving properties in rigid urethane foams using glass bubbles,” Journal of Cellular Plastics, vol. 13, no. 6, pp. 383–392, 1977. View at Publisher · View at Google Scholar · View at Scopus
  31. J. A. Hagarman, J. P. Cunnion, and B. W. Sands, “Formulation and physical properties of polyurethane foam incorporating hollow microspheres,” Journal of Cellular Plastics, vol. 21, no. 6, pp. 406–408, 1985. View at Publisher · View at Google Scholar · View at Scopus
  32. X.-C. Bian, J.-H. Tang, and Z.-M. Li, “Flame retardancy of hollow glass microsphere/rigid polyurethane foams in the presence of expandable graphite,” Journal of Applied Polymer Science, vol. 109, no. 3, pp. 1935–1943, 2008. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Pellegrino, V. L. Tagarielli, R. Gerlach, and N. Petrinic, “The mechanical response of a syntactic polyurethane foam at low and high rates of strain,” International Journal of Impact Engineering, vol. 75, pp. 214–221, 2015. View at Publisher · View at Google Scholar