Table of Contents
Journal of Composites
Volume 2015, Article ID 707151, 8 pages
http://dx.doi.org/10.1155/2015/707151
Research Article

Unidirectional Cordenka Fibre-Reinforced Furan Resin Full Biocomposite: Properties and Influence of High Fibre Mass Fraction

College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018, China

Received 23 June 2015; Revised 14 August 2015; Accepted 30 August 2015

Academic Editor: Laurent Orgéas

Copyright © 2015 Talent Malaba and Jiajun Wang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Faruk, A. K. Bledzki, H.-P. Fink, and M. Sain, “Biocomposites reinforced with natural fibers: 2000–2010,” Progress in Polymer Science, vol. 37, no. 11, pp. 1552–1596, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. M. J. John and S. Thomas, “Biofibres and biocomposites,” Carbohydrate Polymers, vol. 71, no. 3, pp. 343–364, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Choura, N. M. Belgacem, and A. Gandini, “Acid-catalyzed polycondensation of furfuryl alcohol: mechanisms of chromophore formation and cross-linking,” Macromolecules, vol. 29, no. 11, pp. 3839–3850, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Pessoa, I. M. Mancilha, and S. Sato, “Acid hydrolysis of hemicellulose from sugarcane bagasse,” Brazilian Journal of Chemical Engineering, vol. 14, no. 3, 1997. View at Google Scholar · View at Scopus
  5. X. Chen, H. Li, H. Luo, and M. Qiao, “Liquid phase hydrogenation of furfural to furfuryl alcohol over Mo-doped Co-B amorphous alloy catalysts,” Applied Catalysis A, vol. 233, no. 1-2, pp. 13–20, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. Industrial Fiber Glass Specialities Inc, “Dual laminate construction for furan composite equipment—a bad idea,” Tech. Rep., Industrial Fiber Glass Specialities Inc, Dayton, Ohio, USA, 1994. View at Google Scholar
  7. E. L. Arnold, B. M. Weager, H. E. Hoydonckx, and B. Madsen, “Next generation sustainable composites: development and processing of furan-flax biocomposites,” in Proceedings of the 17th International Conference on Composite Materials (ICCM '09), Paper no. D9:13, Edinburgh, UK, 2009.
  8. J. Ganster and H.-P. Fink, “Novel cellulose fibre reinforced thermoplastic materials,” Cellulose, vol. 13, no. 3, pp. 271–280, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Mader, E. Volkmann, R. Einsiedel, and J. Müssig, “Impact and flexural properties of unidirectional man-made cellulose reinforced thermoset composites,” Journal of Biobased Materials and Bioenergy, vol. 6, no. 4, pp. 481–492, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Cordenka, “Composites,” Tech. Rep., Cordenka, Obernburg, Germany, 2009, http://www.cordenka.com/composites.php. View at Google Scholar
  11. T. Tumolva, M. Kubouchi, and T. Sakai, “Development of abaca/furan green composites,” in Proceedings of the 17th International Conference on Composite Materials (ICCM '09), paper D9:11, Edinburgh, UK, July 2009. View at Scopus
  12. T. Tumolva, M. Kubouchi, S. Aoki, and T. Sakai, “Evaluating the carbon storage potential of furan resin-based green composites,” in Proceedings of the 18th International Conference on Composite Materials (ICCM '11), Paper no. W05-4, Jeju, Republic of Korea, 2011.
  13. A. Thygesen, B. Madsen, A. B. Thomsen, and H. Lilholt, “Effect of acidic conditions on interface and strength of cellulose fibres,” in Proceedings of the 28th Risø International Symposium on Materials Science: Interface Design of Polymer Matrix Composites, Risø National Laboratory, Roskilde, Denmark, 2007.
  14. S. Giannis, E. Arnold, H. E. Hoydonckx, B. M. Weager, and R. H. Martin, “Development of high performance bio-composites based on furan bio-resins for vehicle panels,” in Proceedings of the 13th European Conference on Composite Materials (ECCM '08), Paper no. 240, Stockholm, Sweden, 2008.
  15. D. B. Dittenber and H. V. S. Gangarao, “Critical review of recent publications on use of natural composites in infrastructure,” Composites Part A: Applied Science and Manufacturing, vol. 43, no. 8, pp. 1419–1429, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. B. Bax and J. Müssig, “Impact and tensile properties of PLA/Cordenka and PLA/flax composites,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1601–1607, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Meredith, S. R. Coles, R. Powe et al., “On the static and dynamic properties of flax and Cordenka epoxy composites,” Composites Science and Technology, vol. 80, pp. 31–38, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. H. Deka, M. Misra, and A. Mohanty, “Renewable resource based ‘all green composites’ from kenaf biofiber and poly(furfuryl alcohol) bioresin,” Industrial Crops and Products, vol. 41, no. 1, pp. 94–101, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. A. K. Bledzki and J. Gassan, “Composites reinforced with cellulose based fibres,” Progress in Polymer Science, vol. 24, no. 2, pp. 221–274, 1999. View at Publisher · View at Google Scholar · View at Scopus
  20. D. P. Pfister and R. C. Larock, “Green composites from a conjugated linseed oil-based resin and wheat straw,” Composites Part A: Applied Science and Manufacturing, vol. 41, no. 9, pp. 1279–1288, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. H. M. Akil, M. F. Omar, A. A. M. Mazuki, S. Safiee, Z. A. M. Ishak, and A. Abu Bakar, “Kenaf fiber reinforced composites: a review,” Materials & Design, vol. 32, no. 8-9, pp. 4107–4121, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. M. R. Rahman, M. M. Huque, M. N. Islam, and M. Hasan, “Mechanical properties of polypropylene composites reinforced with chemically treated abaca,” Composites Part A: Applied Science and Manufacturing, vol. 40, no. 4, pp. 511–517, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Xie, C. A. S. Hill, Z. Xiao, H. Militz, and C. Mai, “Silane coupling agents used for natural fiber/polymer composites: a review,” Composites A: Applied Science and Manufacturing, vol. 41, no. 7, pp. 806–819, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. K.-Y. Kim, L. Ye, and C. Yan, “Fracture behavior of polyetherimide (PEI) and interlaminar fracture of CF/PEI laminates at elevated temperatures,” Polymer Composites, vol. 26, no. 1, pp. 20–28, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. A. B. De Morais, M. F. De Moura, A. T. Marques, and P. T. De Castro, “Mode-I interlaminar fracture of carbon/epoxy cross-ply composites,” Composites Science and Technology, vol. 62, no. 5, pp. 679–686, 2002. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Mahmoudi, “Effect of volume fiber and crack length on interlaminar fracture properties of glass fiber reinforced polyester composites (GF/PO composites),” Mechanika, vol. 20, no. 2, pp. 153–157, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Ahmed and L. J. Sluys, “A numerical study on interacting damage mechanisms in FRP laminated composite plates,” Heron, vol. 58, no. 1, pp. 61–85, 2013. View at Google Scholar
  28. M. S. Prasad, C. Venkatesha, and T. Jayaraju, “Experimental methods of determining fracture toughness of fiber reinforced polymer composites under various loading conditions,” Journal of Minerals and Materials Characterization & Engineering, vol. 10, no. 13, pp. 1263–1275, 2011. View at Publisher · View at Google Scholar
  29. C. C. M. Ma, M. S. Yn, J. L. Han, C. J. Chang, and H. D. Wu, “Pultruded fibre-reinforced furfuryl alcohol resin composites: 2. Static, dynamic mechanical and thermal properties,” Composites Manufacturing, vol. 6, no. 1, pp. 53–58, 1995. View at Publisher · View at Google Scholar · View at Scopus
  30. W. G. Trindade, W. Hoareau, J. D. Megiatto, I. A. T. Razera, A. Castellan, and E. Frollini, “Thermoset phenolic matrices reinforced with unmodified and surface-grafted furfuryl alcohol sugar cane bagasse and curaua fibers: properties of fibers and composites,” Biomacromolecules, vol. 6, no. 5, pp. 2485–2496, 2005. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Brebu and C. Vasile, “Thermal degradation of lignin—a review,” Cellulose Chemistry and Technology, vol. 44, no. 9, pp. 353–363, 2010. View at Google Scholar · View at Scopus