Table of Contents
Journal of Composites
Volume 2016, Article ID 6468032, 13 pages
Research Article

Residual Stresses Introduced to Composite Structures due to the Cure Regime: Effect of Environment Temperature and Moisture

1School of Mechanical & Aerospace Engineering, Monash University, Clayton, VIC 3800, Australia
2Aerospace Division, Defence Science and Technology Group, 506 Lorimer Street, Fishermans Bend, VIC 3207, Australia

Received 21 September 2016; Accepted 18 October 2016

Academic Editor: Yuanxin Zhou

Copyright © 2016 N. Chowdhury et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • H. Memarianfard, and R. A Turusov, “Multiscale Analysis of the Residual Stresses Occurring During Curing and Cooling of Thickwall Cross-Ply Filament-Wound Cylinders,” Mechanics of Composite Materials, 2017. View at Publisher · View at Google Scholar
  • N. Iqbal, D. Kumar, and P. K. Roy, “Emergence of time-dependent material properties in chain extended polyureas,” Journal of Applied Polymer Science, pp. 46730, 2018. View at Publisher · View at Google Scholar
  • G.M.K. Pearce, A. Mukkavilli, N.T. Chowdhury, S.H. Lim, B.G. Prusty, A. Crosky, and D.W. Kelly, “Strain Invariant Failure Theory – Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites,” Composite Structures, 2018. View at Publisher · View at Google Scholar
  • Drago Bračun, and Luka Selak, “Optical probing for CNC machining of large parts made from fiber-reinforced polymer composite materials,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar
  • Md Nuruddin, Gamini P. Mendis, Kyungyeon Ra, Seyedeh Mahboobeh Teimouri Sendesi, Tyler Futch, Johnathan Goodsell, Andrew J Whelton, Jeffrey P Youngblood, and John A Howarter, “Evaluation of the physical, chemical, mechanical, and thermal properties of steam-cured PET/polyester cured-in-place pipe,” Journal of Composite Materials, pp. 002199831983913, 2019. View at Publisher · View at Google Scholar
  • N.T. Chowdhury, M.W. Joosten, and G.M.K. Pearce, “An embedded meshing technique (SET) for analysing local strain distributions in textile composites,” Composite Structures, vol. 210, pp. 294–309, 2019. View at Publisher · View at Google Scholar
  • Luka Selak, and Drago Bračun, “Evaluation of localization systems for CNC machining of large FRPC parts,” Procedia CIRP, vol. 81, pp. 844–849, 2019. View at Publisher · View at Google Scholar