Table of Contents
Journal of Crystallography
Volume 2016, Article ID 4351347, 11 pages
http://dx.doi.org/10.1155/2016/4351347
Research Article

Finite Element Simulation and X-Ray Microdiffraction Study of Strain Partitioning in a Layered Nanocomposite

1Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA
2Mechanical Science and Engineering Department, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
3National Center for Supercomputing Applications, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
4Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439, USA

Received 28 February 2016; Accepted 4 May 2016

Academic Editor: Laszlo Toth

Copyright © 2016 R. I. Barabash et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Dietrich, M. H. Poech, H. F. Fischmeister, and S. Schmauder, “Stress and strain partitioning in a Ag-Ni fibre composite under transverse loading Finite element modelling and experimental study,” Computational Materials Science, vol. 1, no. 3, pp. 195–202, 1993. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Wang, R. G. Hoagland, and A. Misra, “Mechanics of nanoscale metallic multilayers: from atomic-scale to micro-scale,” Scripta Materialia, vol. 60, no. 12, pp. 1067–1072, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Dannemann, N. S. Stoloff, and D. J. Duquette, “High temperature fatigue of three nickel-base eutectic composites,” Materials Science and Engineering, vol. 95, pp. 63–71, 1987. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Needleman, “Computational mechanics at the mesoscale,” Acta Materialia, vol. 48, no. 1, pp. 105–124, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Frommeyer and R. Rablbauer, “High temperature materials based on the intermetallic compound NiAI reinforced by refractory metals for advanced energy conversion technologies,” Steel Research International, vol. 79, no. 7, pp. 507–512, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. J. W. Hutchinson and A. G. Evans, “Mechanics of materials: top-down approaches to fracture,” Acta Materialia, vol. 48, no. 1, pp. 125–135, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. A. G. Evans, “Design and life prediction issues for high-temperature engineering ceramics and their composites,” Acta Materialia, vol. 45, no. 1, pp. 23–40, 1997. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Li, Z. Zhang, R. Vogt, J. M. Schoenung, and E. J. Lavernia, “Boundaries and interfaces in ultrafine grain composites,” Acta Materialia, vol. 59, no. 19, pp. 7206–7218, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. I. J. Beyerlein, N. A. Mara, D. Bhattacharyya, D. J. Alexander, and C. T. Necker, “Texture evolution via combined slip and deformation twinning in rolled silver-copper cast eutectic nanocomposite,” International Journal of Plasticity, vol. 27, no. 1, pp. 121–146, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Yu, H. Bei, Y. Chen, E. P. George, and K. An, “Phase-specific deformation behavior of a relatively tough NiAl–Cr(Mo) lamellar composite,” Scripta Materialia, vol. 84-85, pp. 59–62, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. R. I. Barabash, W. Liu, J. Z. Tischler, H. Bei, and J. D. Budai, “Phase-specific elastic/plastic interface interactions in layered NiAl–Cr(Mo) structures,” Acta Materialia, vol. 60, no. 8, pp. 3279–3286, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. R. I. Barabash, H. Bei, Y. F. Gao, and G. E. Ice, “Interface strength in NiAl-Mo composites from 3-D X-ray microdiffraction,” Scripta Materialia, vol. 64, no. 9, pp. 900–903, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Frommeyer, R. Rablbauer, and H. J. Schäfer, “Elastic properties of B2-ordered NiAl and NiAl–X (Cr, Mo, W) alloys,” Intermetallics, vol. 18, no. 3, pp. 299–305, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Bei, E. P. George, and G. M. Pharr, “Small-scale mechanical behavior of intermetallics and their composites,” Materials Science and Engineering A, vol. 483-484, no. 1-2, pp. 218–222, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. J. M. Tartaglia and N. S. Stoloff, “Fatigue of Ni-Al-Mo aligned eutectics at elevated temperatures,” Metallurgical Transactions A, vol. 12, no. 11, pp. 1891–1898, 1981. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Rablbauer, G. Frommeyer, and F. Stein, “Determination of the constitution of the quasi–binary eutectic NiAl–Re system by DTA and microstructural investigations,” Materials Science and Engineering A, vol. 343, no. 1-2, pp. 301–307, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. J. T. Guo, K. W. Huai, Q. Gao, W. L. Ren, and G. S. Li, “Effects of rare earth elements on the microstructure and mechanical properties of NiAl-based eutectic alloy,” Intermetallics, vol. 15, no. 5-6, pp. 727–733, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. L.-Z. Tang, Z.-G. Zhang, S.-S. Li, and S.-K. Gong, “Mechanical behaviors of NiAl-Cr(Mo)-based near eutectic alloy with Ti, Hf, Nb and W additions,” Transactions of Nonferrous Metals Society of China, vol. 20, no. 2, pp. 212–216, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Y. Sheng, W. Zhang, J. T. Guo, L. Z. Zhou, and H. Q. Ye, “Microstructure evolution and mechanical properties' improvement of NiAl–Cr(Mo)–Hf eutectic alloy during suction casting and subsequent HIP treatment,” Intermetallics, vol. 17, no. 12, pp. 1115–1119, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Y. Sheng, Y. Xie, T. F. Xi, J. T. Guo, Y. F. Zheng, and H. Q. Ye, “Microstructure characteristics and compressive properties of NiAl-based multiphase alloy during heat treatments,” Materials Science and Engineering A, vol. 528, no. 29-30, pp. 8324–8331, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Huai, J. Guo, Z. Ren, Q. Gao, and R. Yang, “Effect of Nb on the microstructure and mechanical properties of cast NiAl-Cr(Mo) eutectic alloy,” Journal of Materials Science and Technology, vol. 22, no. 2, pp. 164–168, 2006. View at Google Scholar · View at Scopus
  22. J.-M. Yang, S. M. Jeng, K. Bain, and R. A. Amato, “Microstructure and mechanical behavior of in-situ directional solidified NiAl/Cr(Mo) eutectic composite,” Acta Materialia, vol. 45, no. 1, pp. 295–305, 1997. View at Publisher · View at Google Scholar · View at Scopus
  23. R. I. Barabash and G. E. Ice, Eds., Strain and Dislocation Gradients from Diffraction, Imperial College Press, London, UK, 1st edition, 2014.
  24. R. Barabash, G. E. Ice, B. C. Larson, G. M. Pharr, K.-S. Chung, and W. Yang, “White microbeam diffraction from distorted crystals,” Applied Physics Letters, vol. 79, no. 6, pp. 749–751, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Yang, B. C. Larson, G. E. Ice et al., “Spatially resolved poisson strain and anticlastic curvature measurements in Si under large deflection bending,” Applied Physics Letters, vol. 82, no. 22, pp. 3856–3858, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. G. E. Ice, J. D. Budai, and J. W. L. Pang, “The race to X-ray microbeam and nanobeam science,” Science, vol. 334, no. 6060, pp. 1234–1239, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Wang, R. Barabash, T. Bieler, W. Liu, and P. Eisenlohr, “Study of {11-2 1} twinning in α-Ti by EBSD and laue microdiffraction,” Metallurgical and Materials Transactions A, vol. 44, no. 8, pp. 3664–3674, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. R. I. Barabash, O. M. Barabash, M. Ojima et al., “Interphase strain gradients in multilayered steel composite from microdiffraction,” Metallurgical and Materials Transactions A, vol. 45, no. 1, pp. 98–108, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. Abaqus, Abaqus/Standard Analysis User's Manual, Version 6.13, 2013.
  30. S. Koric and B. G. Thomas, “Efficient thermo-mechanical model for solidification processes,” International Journal for Numerical Methods in Engineering, vol. 66, no. 12, pp. 1955–1989, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  31. C. Zienkiewicz and L. T. Taylor, The Finite Element Method for Fluid Dynamics, Butterworth-Heinemann, Boston, Mass, USA; Elsevier, Burlington, Mass, USA, 6th edition, 2005.
  32. S. Koric, Q. Lu, and E. Guleryuz, “Evaluation of massively parallel linear sparse solvers on unstructured finite element meshes,” Computers and Structures, vol. 141, pp. 19–25, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Fish and T. Belytschko, A First Course in Finite Elements, John Wiley & Sons, Chichester, UK, 2007. View at Publisher · View at Google Scholar · View at MathSciNet
  34. iForge, iForge-NCSA's Exclusive Industrial HPC Resource, 2013, http://www.ncsa.illinois.edu/News/12/0709NCSAiForge.html.