Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2014, Article ID 857947, 6 pages
http://dx.doi.org/10.1155/2014/857947
Research Article

Force/Position Hybrid Control of 6PUS-UPU Redundant Driven Parallel Manipulator Based on 2-DOF Internal Model Control

Key Laboratory of Advanced Forging & Stamping Technology and Science and Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao 066004, China

Received 16 September 2014; Accepted 16 November 2014; Published 8 December 2014

Academic Editor: Hung-Yuan Chung

Copyright © 2014 Kuijing Zheng and Chao Wang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. A. Ajwad, R. U. Islam, U. Iqbal, and J. Iqbal, “Modeling and computed torque control of a 6 degree of freedom robotic arm,” in Proceedings of the IEEE International Conference on Robotics and Emerging Allied Technologies in Engineering, pp. 133–138, 2014.
  2. G. Zhang, J. H. Wu, P. K. Liu, and H. Ding, “Dynamic analysis and model-based feedforward control of a 2-dof translational parallel manipulator driven by linear motors,” Industrial Robot, vol. 40, no. 6, pp. 597–609, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Y. Yang, J. Y. Wu, and J. P. Mei, “Motor-mechanism dynamic model based neural network optimized computed torque control of a high speed parallel manipulator,” Mechatronics, vol. 17, no. 7, pp. 381–390, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Müller and T. Hufnagel, “Adaptive and singularity-free inverse dynamics models for control of parallel manipulators with actuation redundancy,” in Proceedings of the ASME Design Engineering Technical Conference, vol. 6, pp. 989–997, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. W. Achim and N. Matthias, “Disturbance feed forward control of a handheld parallel robot,” in Proceedings of the International Conference on Informatics in Control, Automation and Robotics, vol. 1, pp. 44–51, 2007.
  6. M. Farhadmanesh, M. A. Rastin, S. A. A. Moosavian, and M. Taherynezhad, “Design of a new fuzzy model-based controller for complex dynamical systems with application to a 3-RRR spherical parallel manipulator,” in Proceedings of the Iranian Conference on Fuzzy Systems, pp. 1–5, 2013.
  7. F. Jin and L. Dong, “Research on PMSM servo system based on internal module and robust 2-DOF control structure,” in Proceedings of the Chinese Control and Decision Conference, pp. 5393–5396, 2009.
  8. S. Alcántara, C. Pedret, R. Vilanova, and S. Skogestad, “Generalized internal model control for balancing input/output disturbance response,” Industrial and Engineering Chemistry Research, vol. 50, no. 19, pp. 11170–11180, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. A. M. Y. Luk, E. H. K. Fung, and W. C. Gan, “2-DOF planar motion control system using model reference adaptive control algorithm,” in Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE '12), pp. 271–280, Houston, Tex, USA, November 2012.
  10. W. W. Shang and S. Cong, “Robust nonlinear control of a planar 2-DOF parallel manipulator with redundant actuation,” Robotics and Computer-Integrated Manufacturing, vol. 30, no. 6, pp. 597–604, 2014. View at Publisher · View at Google Scholar · View at Scopus