<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-4.3443pt" id="M1" height="15.7437pt" version="1.1" viewBox="-0.0657574 -11.3994 26.6531 15.7437" width="26.6531pt"><g transform="matrix(.017,0,0,-0.017,0,0)"><path id="g113-73" d="M828 650H570L564 622C646 614 650 609 634 524L604 366H253L281 524C296 608 308 615 382 622L388 650H132L126 622C211 615 214 609 198 524L121 122C106 42 102 35 23 28L17 0H276L282 28C196 35 191 40 206 122L243 324H597L559 123C544 42 537 35 452 28L446 0H710L716 28C632 35 628 43 643 122L719 524C735 610 741 615 822 622L828 650Z"/></g><g transform="matrix(.012,0,0,-0.012,13.299,4.134)"><path id="g50-30" d="M1000 227C1000 351 905 451 780 451C658 451 590 380 530 279C465 385 388 451 261 451C168 451 38 376 38 210C38 98 121 -12 261 -12C381 -12 448 59 508 160C573 53 652 -12 780 -12C879 -12 1000 64 1000 227ZM485 199C434 109 370 25 271 25C188 25 133 117 133 241C133 355 189 414 249 414C357 414 426 302 485 199ZM903 204C903 70 852 25 790 25C681 25 611 136 552 240C603 330 669 414 768 414C855 414 903 321 903 204Z"/></g></svg> Loop Shaping Control of Input Saturated Systems with Norm-Bounded Parametric Uncertainty

Pereira, Renan Lima; Kienitz, Karl Heinz

doi:https://doi.org/10.1155/2015/383297

Journal of Control Science and Engineering

On this page

Abstract Introduction Preliminaries Numerical Example Conclusions Acknowledgments References Copyright Related Articles

Research Article | Open Access

Volume 2015 | Article ID 383297 | https://doi.org/10.1155/2015/383297

Loop Shaping Control of Input Saturated Systems with Norm-Bounded Parametric Uncertainty

Renan Lima Pereira¹and Karl Heinz Kienitz¹

Academic Editor: Xiao He

Received01 May 2015

Accepted17 Jun 2015

Published06 Jul 2015

Abstract

This paper proposes a gain-scheduling control design strategy for a class of linear systems with the presence of both input saturation constraints and norm-bounded parametric uncertainty. LMI conditions are derived in order to obtain a gain-scheduled controller that ensures the robust stability and performance of the closed loop system. The main steps to obtain such a controller are given. Differently from other gain-scheduled approaches in the literature, this one focuses on the problem of loop shaping control design with input saturation nonlinearity and norm-bounded uncertainty to reduce the effect of the disturbance input on the controlled outputs. Here, the design problem has been formulated in the four-block synthesis framework, in which it is possible to describe the parametric uncertainty and the input saturation nonlinearity as perturbations to normalized coprime factors of the shaped plant. As a result, the shaped plant is represented as a linear parameter-varying (LPV) system while the norm-bounded uncertainty and input saturation are incorporated. This procedure yields a linear parameter-varying structure for the controller that ensures the stability of the polytopic LPV shaped plant from the vertex property. Finally, the effectiveness of the method is illustrated through application to a physical system: a VTOL “vertical taking-off landing” helicopter.

1. Introduction

In recent years, input saturation and model uncertainty problems have been extensively studied in the control system literature, where much attention has been focused on the problems of robust stabilization and performance [1–9]. Input saturation is a phenomenon due to inevitable physical limitations of the actuators, such as pumps or compressors that have finite throughput capacity and motors that have a limited range of speed [10]. This saturation can lead to deterioration of the actuator itself or even to the instability of the system. When a system is subject to input saturation, two main issues arise: the guarantee of stability and the containment of performance degradation [7]. To solve this problem, there exist two approaches: two-step and one-step designs [7]. In the first approach, called antiwindup design, a predesigned controller is given without considering the input saturation constraints; usually a standard controller is used. Then, after this controller has been designed, an antiwindup compensator is designed to handle the input saturation nonlinearity. Thus, the antiwindup compensator is designed to ensure that stability is maintained and the performance degradation is contained. Antiwindup compensator research using linear matrix inequalities has been vigorously pursued as can be seen by a significant number of referenced papers [2, 11–14]. This is because LMI techniques offer the advantage of operational simplicity when compared to other approaches. For the second approach, one-step design, the input saturation is directly accounted for in controller design; that is, the controller and an antiwindup compensator are simultaneously computed [15].

Several solutions for input saturation problems have been proposed. However, just few references deal with LPV systems [3, 16–18]. Motivated by this scarcity, recent work focused on employing gain-scheduling controllers designed with an approach [19]. This resulted in an advantageous technique using LMI for an loop shaping controller design with input saturation, derived from a four-block configuration. Its advantage lies fundamentally in the ease of making trade-offs between performance and robustness to plant uncertainty and the saturation nonlinearities are described as perturbations to normalized coprime factors of the shaped plant.

As gain-scheduling loop shaping control can be viewed as robust against nonparametric uncertainties, this controller can also be viewed as a candidate to solve the robust control problem against presence of both nonparametric and parametric uncertainties. Thus, the contribution of this paper, motivated by the results in [19], consists in extending their procedure in order to ensure the robust stability of the closed loop system subject to both the constraint of an input saturation nonlinearity and parametric uncertainties. Here, the parameter uncertainties are assumed to be time-varying but norm-bounded. Sufficient conditions for the existence of the gain scheduled parametric loop shaping controller are given in terms of an LMI framework, which also provides the Lyapunov matrix ensuring the stability and robust performance of the LPV controlled system from of the vertex property [20, 21]. The effectiveness of the design method was evaluated using a physical system: a VTOL helicopter [22]. This paper is organized as follows. Section 2 gives some problem statements and preliminaries about the purpose of the paper. In Section 3 a solvability condition for existence of a gain scheduled loop shaping controller using the constraint of input saturation and norm-bounded parametric uncertainty is established. In Section 4, an example is considered to evaluate the effectiveness of the proposed method. Finally, Section 5 contains the conclusion.

The notation used in this paper is fairly standard: denotes the set of real matrices and is the identity matrix. (or ) means is symmetric and positive (or negative) definite. indicates symmetric blocks in the LMIs. Here, the notationis used to denote the transfer function .

2. Problem Statements and Preliminaries

The exposition in this section closely follows [19], where the loop-shaping design procedure based on robust stabilization combined with a four-block configuration is presented. In Figure 1, the block diagram for the loop shaping control design problem with input saturation nonlinearity is shown depicted. In this formulation, the input saturation nonlinearity is incorporated through a dynamic weighting function , and the postcompensator is considered as an identity matrix with proper dimension.

In the absence of input saturation constraints an controller is designed such that the closed loop system satisfies the condition :where is the maximum achievable robust stability margin, is the transfer function matrix from the disturbances to the outputs , and is the shaped plant. Herein, the designer knows the maximum input at the th channel, that is, the control value that can be used without exceeding the limit of the actuator in channel . The saturation nonlinearity is defined as follows, in normalized form: Normalization always can be achieved by scaling each channel in and with the appropriate factor. As shown in [19] the maximum control input in each th channel can be specified; a corresponding slope for each th channel is also known. Without losing generality, this slope can be assumed to be less than or equal to 1. Define with as where and is constrained by . It implies that () and, for the multivariable system with number of input channels, it can be written as with . It is observed that in the loop shaping using four-block configuration the shaped plant can be represented as a polytopic system where the input saturation constraint is allocated between the dynamic weighting function and the nominal plant .

For the existence of a gain-scheduled controller, the sufficient conditions proposed by [19] for saturated systems have been elaborated in the following theorem.

Theorem 1 (see [19]). Consider the nominal plant and a proper weighting function , with being a known saturation bounded for each th channel where . Then there exists a shaped plant with input saturation nonlinearity that can be represented as a polytopic LPV system: where is quadratically stabilizable and detectable for all in the polytope with the vertices in . Moreover, there exists a stabilizing LPV controller such that , if and only if there exist , that satisfy the following inequalities: where and denote bases of the null spaces of and , respectively.

The proof of this theorem and additional details can be found in [19]. Conditions (6) are numerically tractable and solvable. From these sufficient conditions an gain-scheduled controller can be synthesized.

In Theorem 1, the solvability conditions are defined by two positive definite matrices and . If there exist feasible solutions, the gain-scheduled controller matrices in form are then calculated following the method described in [23]. The main steps to the understanding of the gain-scheduling control design will be described. Firstly, consider the closed loop system which can be written by the state-space equations with being the controller state, , , and . Here, , , , and are the affine functions of . In a second step, find the Lyapunov matrix from of the following linear equation:

is a unique solution, where and are full row rank matrices with [23]. Now, using the well known Bounded Real Lemma [24] that ensures the internal stability and the norm constraint, determine the gain-scheduled controller if and only if there exists a such that

Applying the procedure described in [19, 20, 23] for the LMIs conditions above, we obtain the gain-scheduled loop shaping controller that ensures the robust stability of the closed loop system subject to constraint of input saturation nonlinearity. Now, some important results that are required to establish the main results of this paper will be described.

3. Main Results

Consider the plant described by state-space models in the form where is the state vector, the input vector, and the output vector. Herein, , , , and are known constant matrices that describe the nominal system and is a matrix function representing the time-varying parametric uncertainty. The parametric uncertainty is considered in form , where and are known constant matrices with appropriate dimensions and is an unknown matrix with Lebesgue measurable elements such that [25]. Now, consider that the dynamic weighting function can be defined as where is the state vector, the input vector, and the output vector of the dynamic weighting function. Following the same procedure described by [19] the state-space model of the loop shaping framework (Figure 1) in the presence of input saturation and uncertainties in the matrix can be written as

Following a few mathematical manipulations we can write the shaped plant as

Thus, the state-space matrices can be written in the form

Making and substituting (16) and emphasizing that with we obtain For technical simplification, it is considered that and are strictly proper; that is, and in (16) such that overall closed loop system is given by where and This system is quadratically stable with [26]. From the generalized plant in four-block configuration considering , synthesis conditions are now presented for the design of the gain-scheduled parametric loop shaping controller subject to both constraint of input saturation and parametric uncertainties.

Theorem 2. There exists a stabilizing gain-scheduled controller subject to both constraint of input saturation with and parametric uncertainties such that if for some there exist , , satisfying the following inequalities: where Moreover, a suitable gain-scheduled controller when varies in the polytope is described as where and are arbitrary nonsingular matrices satisfying with .

Proof. According to [21], a closed loop system is stable with if and only if there exists a such that For norm-bounded parametric uncertainty, an important lemma will be used to prove the main results in this paper.

Lemma 3 (see [27]). Consider , and matrices with appropriate dimensionsif only if there exists such that The lemma above and Schur complement imply that there exists a Lyapunov matrix such that where Now, partition the Lyapunov matrix in accordance with the structure of the matrix and matrices given by , , , and [24]; we obtain with , , and . To eliminate the nonlinear terms in (26) it is necessary to consider the transformation matrix given by Thus it is possible to apply the following congruence transformation on for the inequality : Now, premultiplying and postmultiplying (26) by and its transpose, respectively, yieldwith . Solving the terms , , and we obtain a gain-scheduled controller that ensures the robust stability of the closed loop system subject to the input saturation constraint and norm-bounded parametric uncertainty: where the optimization variables are , , , , , and with and .

It can be noted that (20) cannot be solved directly via an LMI software, due to the product of with . To overcome this difficulty, it is important to set an a priori value for and afterward use an LMI solver. Thus it is necessary to tune the parameter until a feasible solution is found.

4. Numerical Example

This section describes a realistic design of a gain scheduled loop shaping controller considering both input saturation constraint and parametric uncertainties for a VTOL helicopter. The synthesis procedure described in this section was implemented using the following software suite: Matlab 7.5.0, SeDuMi [28], and Yalmip [29].

4.1. VTOL Helicopter

This example was inspired by [22] where a robust controller was designed in order to keep the closed loop system stable when subject to airspeed changes. Here, the model is slightly modified to address the present problem, being described by the following states equations: with where the states variables are horizontal velocity, , vertical velocity, , pitch rate, , and pitch angle, ; the saturating input variables are collective pitch control, , and longitudinal cyclic pitch control, . Moreover, the following bound parameters are assumed: with and with . Now, assuming the parametric uncertainty , we can represent the uncertainty using the following matrices:

The following specifications are chosen for the controller to be designed: reference signal tracking and disturbance rejection with error not exceeding 10% zero steady error for the step input; stability of the controlled system for input saturation limits of ±2.5. Typically, a dynamic weighting function is used to enforce the performance specifications in the frequency domain. This weighting function must be selected in order to obtain high gain at low frequencies, roll-off rates of approximately 20 dB/decade at the desired bandwidth(s), and higher rates at high frequencies [30]. To satisfy these requirements, we chose

From this choice the shaped plant has been defined. The frequency response of the shaped plant in comparison to nominal plant is presented in Figure 2.

To demonstrate the effectiveness of the proposed method, two different designs will be discussed. The first consists in the design of an loop shaping controller for the VTOL helicopter considering only norm-bounded parametric uncertainty; this design will be used as a reference for performance evaluation. The second consists in the proposed LPV approach considering both the input saturation constraint and norm-bounded parametric uncertainty. In this design, the same dynamic weighting function and have been considered. Suitable values of can be found by a grid search, in this example in the interval . Furthermore, two varying parameters that indicate the level of actuator’s saturation are defined. Herein, it is assumed that varies in the range between 0 and 0.4 and varies between 0 and 0.2, representing a polytope with four vertices and input saturation limits around ±2.5. For both designs the maximum robust stability margin () was achieved. In the absence of input saturation, that is, considering only norm-bounded parametric uncertainty, the loop shaping controller was a robust stability margin of 0.60 while the gain-scheduled controller was a margin of 0.40.

Figures 3 and 4 illustrate the performance of the two controllers designed. They satisfied the requirements of reference signal tracking, zero steady error for the step input, and guarantee of robust stability of the controlled system for input saturation of ±2.5. It can be noted that another simulation for better evaluation of the proposed method is incorporated. It consists basically in the performance of the loop shaping controller designed considering a saturation block. Taking into account the control input in both channels obtained with the two controllers designed, it is observed that gain scheduled loop shaping has a better performance than the loop shaping controller incorporating the saturation block.

Next, the guaranteed simultaneous gain/phase margins [31, 32] were used to evaluate the controlled system’s robustness. These margins were defined as

The loop shaping controller considering only norm-bounded parametric uncertainty has a gain margin of ±6.02 dB; its phase margin is . The gain-scheduled loop shaping controller has a gain margin of ±3.67 dB and phase margin of . The guaranteed simultaneous gain/phase margins for the gain-scheduled controller are less than for the LTI controller without input saturation considering only parametric uncertainties. This conservative margin occurs because in (22) there is a style set of , being used for all polytope vertices. From these results, it is concluded that the proposed method is an interesting alternative for systems subject to input saturation and parametric uncertainties.

5. Conclusions

New sufficient LMI conditions for the synthesis of gain scheduled loop shaping controllers considering both input saturation constraints and norm-bounded parametric have been presented. The methodology addresses the design problem in the four-block synthesis framework, in which it is possible, through a linear parameter-varying structure, to describe the parametric uncertainty and the input saturation nonlinearity as perturbations to normalized coprime factors of the shaped plant. Moreover, it is observed that the synthesis is quite simple, but in practical terms some adjustments are necessary to avoid high gains and an inappropriate limited control input must be considered. One difficulty found in this methodology is the exhaustive attempt to find the parameter , which is capable of providing good performance and a feasible solution. Future work should use computational techniques in order to reduce this exhaustive attempt to find . Finally, performance and robustness analysis illustrate that the controllers obtained can be an advantageous strategy for a class of linear systems with the presence of both constraint of input saturation and parametric uncertainty.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgments

The authors acknowledge support provided by CAPES (Grant 88887.092490/2015-00) and FAPESP (Grant 2011/17610-0).

References

F. Tyan and D. S. Bernstein, “Anti-windup compensator synthesis for systems with saturation actuators,” International Journal of Robust and Nonlinear Control, vol. 5, no. 5, pp. 521–537, 1995.
View at: Publisher Site | Google Scholar | MathSciNet
D. Henrion, S. Tarbouriech, and G. Garcia, “Output feedback robust stabilization of uncertain linear systems with saturating controls: an LMI approach,” IEEE Transactions on Automatic Control, vol. 44, no. 11, pp. 2230–2237, 1999.
View at: Publisher Site | Google Scholar | MathSciNet
T. Nguyen and F. Jabbari, “Disturbance attenuation for LPV systems with bounded inputs,” in Proceedings of the IEEE American Control Conference, pp. 1543–1547, June 1998.
View at: Publisher Site | Google Scholar
T. Nguyen and F. Jabbari, “Disturbance attenuation for systems with input saturation: an LMI approach,” IEEE Transactions on Automatic Control, vol. 44, no. 4, pp. 852–857, 1999.
View at: Publisher Site | Google Scholar | MathSciNet
E. F. Mulder, M. V. Kothare, and M. Morari, “Multivariable anti-windup controller synthesis using linear matrix inequalities,” Automatica, vol. 37, no. 9, pp. 1407–1416, 2001.
View at: Publisher Site | Google Scholar | Zentralblatt MATH
İ. Köse and F. Jabbari, “Scheduled controllers for linear systems with bounded actuators,” Automatica, vol. 39, no. 8, pp. 1377–1387, 2003.
View at: Publisher Site | Google Scholar | MathSciNet
S. Tarbouriech and M. Turner, “Anti-windup design: an overview of some recent advances and open problems,” IET Control Theory & Applications, vol. 3, no. 1, pp. 1–19, 2009.
View at: Publisher Site | Google Scholar | MathSciNet
D. Dai, T. Hu, A. R. Teel, and L. Zaccarian, “Output feedback design for saturated linear plants using deadzone loops,” Automatica, vol. 45, no. 12, pp. 2917–2924, 2009.
View at: Publisher Site | Google Scholar | MathSciNet
S. Patra, S. Sen, and G. Ray, “Local stabilisation of uncertain linear time-invariant plant with bounded control inputs: parametric $H_{\infty}$ loop-shaping approach,” IET Control Theory and Applications, vol. 6, no. 11, pp. 1567–1576, 2012.
View at: Publisher Site | Google Scholar | MathSciNet
M. V. Kothare, P. J. Campo, M. Morari, and C. N. Nett, “A unified framework for the study of anti-windup designs,” Automatica, vol. 30, no. 12, pp. 1869–1883, 1994.
View at: Publisher Site | Google Scholar | MathSciNet
G. Grimm, J. Hatfield, I. Postlethwaite, A. R. Teel, M. C. Turner, and L. Zaccarian, “Antiwindup for stable linear systems with input saturation: an LMIbased synthesis,” IEEE Transactions on Automatic Control, vol. 48, no. 9, pp. 1509–1525, 2003.
View at: Publisher Site | Google Scholar | MathSciNet
J. G. da Silva and S. Tarbouriech, “Antiwindup design with guaranteed regions of stability: an LMI-based approach,” IEEE Transactions on Automatic Control, vol. 50, no. 1, pp. 106–111, 2005.
View at: Publisher Site | Google Scholar | MathSciNet
M. C. Turner, G. Herrmann, and I. Postlethwaite, “Incorporating robustness requirements into antiwindup design,” IEEE Transactions on Automatic Control, vol. 52, no. 10, pp. 1842–1855, 2007.
View at: Publisher Site | Google Scholar | MathSciNet
T. Hu, A. R. Teel, and L. Zaccarian, “An analysis and design method for linear systems subject to actuator saturation and disturbance,” Automatica, vol. 44, no. 2, pp. 512–519, 2008.
View at: Google Scholar
E. F. Mulder, P. Y. Tiwari, and M. V. Kothare, “Simultaneous linear and anti-windup controller synthesis using multiobjective convex optimization,” Automatica, vol. 45, no. 3, pp. 805–811, 2009.
View at: Publisher Site | Google Scholar | MathSciNet
F. Wu, K. M. Grigoriadis, and A. Packard, “Anti-windup controller design using linear parameter-varying control methods,” International Journal of Control, vol. 73, no. 12, pp. 1104–1114, 2000.
View at: Publisher Site | Google Scholar | MathSciNet
Y.-Y. Cao, Z. Lin, and Y. Shamash, “Set invariance analysis and gain-scheduling control for LPV systems subject to actuator saturation,” in Proceedings of the American Control Conference, vol. 1, pp. 668–673, IEEE, May 2002.
View at: Publisher Site | Google Scholar
A. L. Do, J. M. da Silva, O. Semane, and L. Dugard, “Control design for LPV systems with input saturation and state constraints: an application to a semi-active suspension,” in Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC '11), pp. 3416–3421, IEEE, Orlando, Fla, USA, December 2011.
View at: Publisher Site | Google Scholar
S. Patra, S. Sen, and G. Ray, “Design of $H_{\infty}$ loop-shaping controller for LTI system with input saturation: polytopic gain scheduled approach,” Journal of Dynamic Systems, Measurement, and Control, vol. 133, no. 1, Article ID 014506, 6 pages, 2011.
View at: Publisher Site | Google Scholar
P. Apkarian and P. Gahinet, “A convex characterization of gain-scheduled $H_{\infty}$ controllers,” IEEE Transactions on Automatic Control, vol. 40, no. 5, pp. 853–864, 1995.
View at: Publisher Site | Google Scholar | MathSciNet
P. Apkarian, P. Gahinet, and G. Becker, “Self-scheduled $H_{\infty}$ control of linear parameter-varying systems: a design example,” Automatica, vol. 31, no. 9, pp. 1251–1261, 1995.
View at: Publisher Site | Google Scholar | MathSciNet
L. H. Keel, S. P. Bhattacharyya, and J. W. Howze, “Robust control with structured perturbations,” IEEE Transactions on Automatic Control, vol. 33, no. 1, pp. 68–78, 1988.
View at: Publisher Site | Google Scholar | MathSciNet
P. Gahinet, “Explicit controller formulas for LMI-based $H_{\infty}$ synthesis,” Automatica, vol. 32, no. 7, pp. 1007–1014, 1996.
View at: Publisher Site | Google Scholar | MathSciNet
P. Gahinet and P. Apkarian, “A linear matrix inequality approach to $H_{\infty}$ control,” International Journal of Robust and Nonlinear Control, vol. 4, no. 4, pp. 421–448, 1994.
View at: Publisher Site | Google Scholar | MathSciNet
L. Xie and C. E. de Souza, “Robust $H_{\infty}$ control for linear systems with norm-bounded time-varying uncertainty,” IEEE Transactions on Automatic Control, vol. 37, no. 8, pp. 1188–1191, 1992.
View at: Publisher Site | Google Scholar | MathSciNet
T. C. Lai, H. C. Fang, W. S. Kau, and C.-H. Lee, “Robust $H_{2}$ control of norm-bounded uncertain continuous time system—an LMI approach,” in Proceedings of the IEEE International Symposium on Computer Aided Control Systems Design, pp. 243–248, September 2004.
View at: Google Scholar
L. Xie, “Output feedback $H_{\infty}$ control of systems with parameter uncertainty,” International Journal of Control, vol. 63, no. 4, pp. 741–750, 1996.
View at: Publisher Site | Google Scholar | MathSciNet
J. Sturm, “Using SeDuMi1.02 a MATLAB toolbox for optimization over symmetric cones,” Optimization Methods and Software, vol. 11, no. 1, pp. 625–653, 1999.
View at: Google Scholar
J. Löfberg, “YALMIP: a toolbox for modeling and optimization in MATLAB,” in Proceedings of the IEEE International Symposium on Computer Aided Control System Design, pp. 284–289, September 2004.
View at: Google Scholar
S. Skogestad and I. Postlewaite, Multivariable Feedback Control: Analysis and Design, Wiley, New York, NY, USA, 2005.
K. Glover, G. Vinnicombe, and G. Papageorgiou, “Guaranteed multi-loop stability margins and the gap metric,” in Proceedings of the 39th IEEE Confernce on Decision and Control, pp. 4084–4085, December 2000.
View at: Google Scholar
M. C. Turner and D. G. Bates, Mathematical Methods for Robust and Nonlinear Control, Springer, 2007.

Copyright

Copyright © 2015 Renan Lima Pereira and Karl Heinz Kienitz. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1319

Downloads

1025

Citations