Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2017, Article ID 1952594, 11 pages
https://doi.org/10.1155/2017/1952594
Research Article

Parameter Identification and Control Scheme for Monitoring Automatic Thickness Control System with Measurement Delay

1School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing, China
2Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada

Correspondence should be addressed to Xu Yang; nc.ude.btsu@uxgnay

Received 8 March 2017; Revised 24 April 2017; Accepted 10 May 2017; Published 21 June 2017

Academic Editor: Abdul-Qayyum Khan

Copyright © 2017 Xu Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. K. Sun, Modelling and control in cold and hot rolling mills, Metallurgical Industry Press, Beijing, 2010.
  2. S. Yin, G. Wang, and H. Gao, “Data-Driven Process Monitoring Based on Modified Orthogonal Projections to Latent Structures,” IEEE Transactions on Control Systems Technology, vol. 24, no. 4, pp. 1480–1487, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Dong, C. Liu, and G.-Y. Li, “Robust fault diagnosis based on nonlinear model of hydraulic gauge control system on rolling mill,” IEEE Transactions on Control Systems Technology, vol. 18, no. 2, pp. 510–515, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Zhao, N. Lu, and B. Jiang, “Current situation and future trends of fault diagnosis methos for steel rolling process,” Steel Rolling, vol. 28, no. 1, pp. 48–53, 2011. View at Google Scholar
  5. S. Björklund, A Survey and Comparison of Time-Delay Estimation Methods in Linear Systems, Linköping, UniTryck, 2013.
  6. A. B. Rad, W. L. Lo, and K. M. Tsang, “Simultaneous online identification of rational dynamics and time delay: A correlation-based approach,” IEEE Transactions on Control Systems Technology, vol. 11, no. 6, pp. 957–959, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Mehrkanoon, Y. A. W. Shardt, J. A. K. Suykens, and S. X. Ding, “Estimating the unknown time delay in chemical processes,” Engineering Applications of Artificial Intelligence, vol. 55, pp. 219–230, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Zhong, H. Ge, and F. Qian, “Model identification and control for nonlinear discrete-time system with time delay: a support vector machine approach,” in Proceedings of International Conference on Intelligent Systems and Knowledge Engineering, Chengdu, China, 2007.
  9. X. Kong and V. Solo, “Stochastic averaging analysis of a steepest-descent-type adaptive time-delay estimation algorithm,” Mathematics of Control, Signals, and Systems, vol. 7, no. 2, pp. 121–147, 1994. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  10. M. H. Hayes, Statistical Digital Signal Processing and Modeling, John Wiley & Sons, Inc, New York, USA, 1996.
  11. Z. Liu and C. Li, “Recursive least squares for censored regression,” IEEE Transactions on Signal Processing, vol. 65, no. 6, pp. 1565–1579, 2017. View at Publisher · View at Google Scholar · View at MathSciNet
  12. F. Ding, X. Liu, and M. Liu, “The recursive least squares identification algorithm for a class of Wiener nonlinear systems,” Journal of the Franklin Institute. Engineering and Applied Mathematics, vol. 353, no. 7, pp. 1518–1526, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. M. Sun, Y. Wang, H. Wang, and Y. Lü, “Time delay control for hydraulic AGC system in cold rolling mill,” Hydraulic and Pneumatic, vol. 10, pp. 67–69, 2014. View at Google Scholar
  14. S. Yin, X. Zhu, J. Qiu, and H. Gao, “State Estimation in Nonlinear System Using Sequential Evolutionary Filter,” IEEE Transactions on Industrial Electronics, vol. 63, no. 6, pp. 3786–3794, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Ji, P. Wang, S. Li, and R. Wu, “Neural networks based smith pre-estimated control for time-varrying systems with large time delay,” Journal of the Harbin Institute of Technology, vol. 35, no. 3, pp. 303–306, 2003. View at Google Scholar
  16. X. Wang, J. Chen, and X. Zhu, “The modification and research of identification adaptive predictive control for variable time delay system,” Control and Instrument in Chemical Industry, vol. 37, no. 1, pp. 25–27, 2010. View at Google Scholar
  17. O. J. M. Smith, “Closer control of loops with dead time,” Chemical Engineering Progress, vol. 53, no. 5, pp. 217–219, 1957. View at Google Scholar
  18. X. Xu and Z. Mao, “The neural network predictive control of time-delay systems,” Control Theory & Applications, vol. 18, no. 6, pp. 932–934, 2001. View at Google Scholar
  19. X. Zhang and S. Xing, “Data-driven predictive control for hydraulic automatic gauge control of hot rolling mills,” Control Engineering of China, vol. 22, no. 1, pp. 176–179, 2015. View at Google Scholar
  20. Y. A. W. Shardt and B. Huang, “Tuning a soft sensor's bias update term. 1. the open-loop case,” Industrial and Engineering Chemistry Research, vol. 51, no. 13, pp. 4958–4967, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. A. W. Shardt and B. Huang, “Tuning a soft sensor's bias update term. 2. the closed-loop case,” Industrial and Engineering Chemistry Research, vol. 51, no. 13, pp. 4968–4981, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Chen, S. Y. Zhang, and C. N. Tong, “Design of delay-dependent robust fault-tolerant H controller for the strip mill thickness control system,” Control and Decision, vol. 26, no. 1, pp. 101–105, 110, 2011. View at Google Scholar · View at MathSciNet
  23. X. Yang, Q. Zhu, and C. Huang, “Lag stochastic synchronization of chaotic mixed time-delayed neural networks with uncertain parameters or perturbations,” Neurocomputing, vol. 74, no. 10, pp. 1617–1625, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Yin, P. Shi, and H. Yang, “Adaptive Fuzzy Control of Strict-Feedback Nonlinear Time-Delay Systems With Unmodeled Dynamics,” IEEE Transactions on Cybernetics, vol. 46, no. 8, pp. 1926–1938, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. A. W. Shardt, “Statistics for chemical and process engineers: A modern approach,” Statistics for Chemical and Process Engineers: A Modern Approach, pp. 1–414, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. Z.-S. Hou and S.-T. Jin, “A novel data-driven control approach for a class of discrete-time nonlinear systems,” IEEE Transactions on Control Systems Technology, vol. 19, no. 6, pp. 1549–1558, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Yin, G. Wang, and H. Karimi, “Data-driven design of robust fault detection system for wind turbines,” Mechatronics, vol. 24, no. 4, pp. 298–306, 2014. View at Publisher · View at Google Scholar
  28. X. Yang and C. Tong, “Coupling dynamic model and control of chatter in cold rolling,” Journal of Dynamic Systems Measurement & Control, vol. 134, no. 4, pp. 271–277, 2012. View at Google Scholar
  29. L. Wang, C. Tong, Q. Li, Y. Yin, Z. Gao, and Q. Zheng, “Practical active disturbance rejection solution for monitoring automatic gauge control system with large time-delay,” Control Theory and Applications, vol. 29, no. 3, pp. 368–374, 2012. View at Google Scholar
  30. L. Ljung, System Identification Theory for the User, Prentice Hall, Inc, Upper Saddle River, New Jersey, USA, 1999.
  31. R. Suzuki, F. Naitou, S. Yoshida, T. Mori, and M. Yamamoto, “Data position detection using fast fourier transform cross-correlation method for holographic memory,” Japanese Journal of Applied Physics, vol. 47, no. 1, pp. 183–188, 2008. View at Publisher · View at Google Scholar · View at Scopus