Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2017 (2017), Article ID 5401616, 15 pages
https://doi.org/10.1155/2017/5401616
Research Article

Two-Layer Linear MPC Approach Aimed at Walking Beam Billets Reheating Furnace Optimization

Dipartimento di Ingegneria dell’Informazione, Università Politecnica delle Marche, Ancona, Italy

Correspondence should be addressed to Silvia Maria Zanoli

Received 23 September 2016; Revised 18 November 2016; Accepted 21 December 2016; Published 31 January 2017

Academic Editor: Shuyou Yu

Copyright © 2017 Silvia Maria Zanoli and Crescenzo Pepe. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. http://www.honeywellprocess.com.
  2. M. Bauer and I. K. Craig, “Economic assessment of advanced process control—a survey and framework,” Journal of Process Control, vol. 18, no. 1, pp. 2–18, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. P. L. Latour, J. H. Sharpe, and M. C. Delaney, “Estimating benefits from advanced control,” ISA Transactions, vol. 25, no. 4, pp. 13–21, 1986. View at Google Scholar · View at Scopus
  4. C. R. Cutler and B. L. Ramaker, “Dynamic matrix control—a computer control algorithm,” in Proceedings of the Dynamic matrix controla computer control algorithm, 1980.
  5. S. J. Qin and T. A. Badgwell, “A survey of industrial model predictive control technology,” Control Engineering Practice, vol. 11, no. 7, pp. 733–764, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. G. Xi, D. W. Li, and S. Lin, “Model predictive control—current status and challenges,” Acta Automatica Sinica, vol. 39, no. 3, pp. 222–236, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  7. M. L. Darby and M. Nikolaou, “MPC: current practice and challenges,” Control Engineering Practice, vol. 20, no. 4, pp. 328–342, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Lede, “A control system for fuel optimization of reheating furnaces,” Scandinavian Journal of Metallurgy, vol. 15, no. 1, pp. 16–24, 1986. View at Google Scholar · View at Scopus
  9. Z. Wang, T. Chai, S. Guan, and C. Shao, “Hybrid optimization setpoint strategy for slab reheating furnace temperature,” in Proceedings of the American Control Conference (ACC '99), pp. 4082–4086, San Diego, Calif, USA, June 1999. View at Scopus
  10. H. S. Ko, J.-S. Kim, T.-W. Yoon, M. Lim, D. R. Yang, and I. S. Jun, “Modeling and predictive control of a reheating furnace,” in Proceedings of the American Control Conference, pp. 2725–2729, June 2000. View at Scopus
  11. L. Balbis, J. Balderud, and M. J. Grimble, “Nonlinear predictive control of steel slab reheating furnace,” in Proceedings of the American Control Conference (ACC '08), pp. 1679–1684, Seattle, Wash, USA, June 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Steinboeck, D. Wild, and A. Kugi, “Feedback tracking control of continuous reheating furnaces,” in Proceedings of the 18th IFAC World Congress, pp. 11744–11749, Milano, Italy, September 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Steinboeck, D. Wild, and A. Kugi, “Nonlinear model predictive control of a continuous slab reheating furnace,” Control Engineering Practice, vol. 21, no. 4, pp. 495–508, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Zheng, N. Li, and S. Li, “Hot-rolled strip laminar cooling process plant-wide temperature monitoring and control,” Control Engineering Practice, vol. 21, no. 1, pp. 23–30, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Barboni, G. Astolfi, C. Pepe, and F. Cocchioni, “Metodo Per Il Controllo Di Forni Di Riscaldo,” Italian Patent n. 0001424136 awarded by Ufficio Italiano Brevetti e Marchi (UIBM), 2014 http://www.uibm.gov.it/uibm/dati/Avanzata.aspx?load=info_list_uno&id=2253683&table=Invention&.
  16. S. M. Zanoli, C. Pepe, and L. Barboni, “Application of advanced process control techniques to a pusher type reheating furnace,” Journal of Physics: Conference Series, vol. 659, no. 1, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Trinks, M. H. Mawhinney, R. A. Shannon, R. J. Reed, and J. R. Garvey, Industrial Furnaces, John Wiley & Sons, New York, NY, USA, 2004.
  18. A. von Starck, A. Muhlbauer, and C. Kramer, Handbook of Thermoprocessing Technologies, Vulkan, Essen, Germany, 2005.
  19. A. Martensson, “Energy efficiency improvement by measurement and control: a case study of reheating furnaces in the steel industry,” in Proceedings of the 14th National Industrial Energy technology Conference, pp. 236–243, 1992.
  20. F. G. Shinskey, Energy Conservation Through Control, Academic Press, New York, NY, USA, 1978.
  21. L. Ljung, System Identification: Theory for the User, Prentice-Hall, Englewood Cliffs, NJ, USA, 1987. View at MathSciNet
  22. Multivariable system identification for process control, Elsevier, 2001.
  23. T. Liu, Q.-G. Wang, and H.-P. Huang, “A tutorial review on process identification from step or relay feedback test,” Journal of Process Control, vol. 23, no. 10, pp. 1597–1623, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. C. Pepe and S. M. Zanoli, “A two-layer model predictive control system with adaptation to variables status values,” in Proceedings of the 17th IEEE International Carpathian Control Conference (ICCC '16), pp. 573–578, High Tatras, Slovakia, May 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Maciejowski, Predictive Control with Constraints, Prentice-Hall, Harlow, UK, 2002.
  26. E. F. Camacho and C. A. Bordons, Model Predictive Control, Springer, London, UK, 2007.
  27. J. B. Rawlings and D. Q. Mayne, Model Predictive Control: Theory and Design, Nob Hill, Madison, Wisc, USA, 2013.
  28. S. M. Zanoli and C. Pepe, “The importance of cooperation and consistency in two-layer Model Predictive Control,” in Proceedings of the 17th IEEE International Carpathian Control Conference (ICCC '16), pp. 825–830, High Tatras, Slovakia, May 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. J. L. Garriga and M. Soroush, “Model predictive control tuning methods: a review,” Industrial & Engineering Chemistry Research, vol. 49, no. 8, pp. 3505–3515, 2010. View at Publisher · View at Google Scholar · View at Scopus