Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2017 (2017), Article ID 5710408, 7 pages
https://doi.org/10.1155/2017/5710408
Research Article

A Fault Diagnosis Method for Oil Well Pump Using Radial Basis Function Neural Network Combined with Modified Genetic Algorithm

1Harbin University of Science and Technology, Harbin 150001, China
2Research Institute of Oil Production Engineering, Daqing Oilfield Company, Daqing 163000, China
3Tongji University, Shanghai 200092, China
4Harbin Institute of Technology, Harbin 150001, China

Correspondence should be addressed to Deliang Yu

Received 26 April 2017; Revised 16 August 2017; Accepted 29 August 2017; Published 8 October 2017

Academic Editor: Manuel Pineda-Sanchez

Copyright © 2017 Deliang Yu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. I. Abdalla, T. Ibrahim, and N. B. Mohd Nor, “Development and optimization of a moving-magnet tubular linear permanent magnet motor for use in a reciprocating compressor of household refrigerators,” International Journal of Electrical Power and Energy Systems, vol. 77, pp. 263–270, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. E. A. Dil, M. Ghaedi, A. Asfaram, F. Mehrabi, A. A. Bazrafshan, and A. M. Ghaedi, “Trace determination of safranin O dye using ultrasound assisted dispersive solid-phase micro extraction: Artificial neural network-genetic algorithm and response surface methodology,” Ultrasonics Sonochemistry, vol. 33, pp. 129–140, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. G. Chun and W. Zhenglin, Proficient in MATLAB optimization, Electronic Industry press, Beijing, China, 3rd edition, 2014.
  4. X. Guan, Y. Zhu, and W. Song, “Application of RBF neural network improved by peak density function in intelligent color matching of wood dyeing,” Chaos, Solitons and Fractals, vol. 89, pp. 485–490, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. H. B. Huang, R. X. Li, X. R. Huang, T. C. Lim, and W. P. Ding, “Identification of vehicle suspension shock absorber squeak and rattle noise based on wavelet packet transforms and a genetic algorithm-support vector machine,” Applied Acoustics, vol. 113, pp. 137–148, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Jiang, Y. Li, and C. Xue, “Study of PSO-RBF Neural Network in Power System Load Prediction,” in Proceedings of the 2015 2nd International Conference on Electrical, Computer Engineering and Electronics, Shunhe, China, June 2015. View at Publisher · View at Google Scholar
  7. J.-W. Jung, V. Q. Leu, D. Q. Dang, H. H. Choi, and T. H. Kim, “Sliding mode control of SPMSM drivers:an online gain tuning approach with unknown system parameters,” Journal of Power Electronics, vol. 14, no. 5, Article ID JPE 14-5-19, pp. 980–988, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Liyi, T. Yongbin, and L. Jiaxi, “Application of the multiple population genetic algorithm in optimum design of air-core permanent magnet linear synchronous motors,” in Proceedings of the CSEE, vol. 33, pp. 69–77, 2013.
  9. X. Li, L. Zhao, L. Wei et al., “Deepsaliency: multi-task deep neural network model for salient object detection,” IEEE Transactions on Image Processing, vol. 25, no. 8, pp. 3919–3930, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  10. B. Liu, X. Huang, and J. Li, “Optimal sizing of distributed generation in a typical island microgrid with time-shifting load,” Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, vol. 34, no. 25, pp. 4250–4258, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Liu, L. Huang, H. Yu, C. Wen, and W. Zhong, “Study on the characteristics of a novel six-phase fault-torrent linear permanent magnet machine for linear oil pumping,” IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Melo and J. Watada, “Gaussian-PSO with fuzzy reasoning based on structural learning for training a Neural Network,” Neurocomputing, vol. 172, pp. 405–412, 2016. View at Publisher · View at Google Scholar
  13. M. Omura, T. Shimono, and Y. Fujimoto, “Development of semicircular tubular coreless linear motor and its motion control,” Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), vol. 195, no. 4, pp. 50–63, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Garanayak and G. Panda, “Harmonic elimination and reactive power compensation with a novel control algorithm based active power filter,” Journal of Power Electronics, vol. 15, no. 6, pp. 1619–1627, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Shi, J. Tang, P. Wang, L. Han, and X. Zhang, “Stator fault diagnosis of induction motors using the optimal wavelet tree and improved BP neural network,” Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, vol. 30, no. 24, pp. 38–45, 2015. View at Google Scholar · View at Scopus
  16. Y. Tang, H. Gao, and J. Kurths, “Multiobjective identification of controlling areas in neuronal networks,” IEEE/ACM Transactions on Computational Biology and Bioinformatics, vol. 10, no. 3, pp. 708–720, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Tian, Z. Wang, C. Lu, and Z. Wang, “Bearing diagnostics: A method based on differential geometry,” Mechanical Systems and Signal Processing, vol. 80, pp. 377–391, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Bo1, Z. Haisen1, L. Heming1, and L. Shoujun, “Design and applications of the testing system with dynamic load for beam pumping motor,” in Proceedings of the CSEE, vol. 34, pp. 3488–3495, 2014.
  19. D. Wang, “Sensitivity analysis of structural response to position of external applied load: in plane stress condition,” Structural and Multidisciplinary Optimization, vol. 50, no. 4, pp. 605–622, 2014. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  20. X. Niu, J. Wang, and Z. Ren, “A fault diagnosis based on combination model of VPRS and PSO-BP neural network,” Chemical Engineering Transactions, vol. 46, pp. 319–324, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Xie, W. Xiong, D. Zhuo, and X. Wang, “Drawbead geometric parameters using an improved equivalent model and PSO-BP neural network,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 230, no. 4, pp. 899–910, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Yu, Y. Zhang, H. Bian, X. Wang, and W. Qi, “A new diagnostic method for identifying working conditions of submersible reciprocating pumping systems,” Petroleum Science, vol. 10, no. 1, pp. 81–90, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. D. Yu, S. Deng, Y. Zhang, and W. Qi, “Working condition diagnosis method based on SVM of submersible plunger pump,” Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, vol. 28, no. 4, pp. 248–284, 2013. View at Google Scholar · View at Scopus
  24. E. Zhang, L. Hou, C. Shen, Y. Shi, and Y. Zhang, “Sound quality prediction of vehicle interior noise and mathematical modeling using a back propagation neural network (BPNN) based on particle swarm optimization (PSO),” Measurement Science and Technology, vol. 27, no. 1, Article ID 015801, 2015. View at Publisher · View at Google Scholar · View at Scopus