Table of Contents Author Guidelines Submit a Manuscript
Journal of Engineering
Volume 2014, Article ID 925410, 11 pages
http://dx.doi.org/10.1155/2014/925410
Research Article

Effect of Water-Cement Ratio on the Macrocell Polarization Behavior of Reinforcing Steel

Concrete laboratory, Department of Civil Engineering, Kyushu Institute of Technology, Kitakyushu-shi 804-8550, Japan

Received 11 August 2014; Accepted 19 October 2014; Published 16 November 2014

Academic Editor: Yongping Chen

Copyright © 2014 Zhonglu Cao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Arya and P. R. W. Vassie, “Influence of cathode-to-anode area ratio and separation distance on galvanic corrosion currents of steel in concrete containing chlorides,” Cement and Concrete Research, vol. 25, no. 5, pp. 989–998, 1995. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Vedalakshmi, K. Rajagopal, and N. Palaniswamy, “Longterm corrosion performance of rebar embedded in blended cement concrete under macro cell corrosion condition,” Construction and Building Materials, vol. 22, no. 3, pp. 186–199, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. C. M. Hansson, A. Poursaee, and A. Laurent, “Macrocell and microcell corrosion of steel in ordinary Portland cement and high performance concretes,” Cement and Concrete Research, vol. 36, no. 11, pp. 2098–2102, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Ohno, K. Suzuki, and H. Tamura, “Effect of cover thickness and cracking on corrosion of steel in concrete,” JCA Proceeding of Cement and Concrete, vol. 46, pp. 642–647, 1992 (Japanese). View at Google Scholar
  5. Y. Ohno, K. Suzuki, and H. Tamura, “Corrosion of steel in cracked concrete,” in Proceedings of the JCA Proceeding of Cement and Concrete, vol. 47, pp. 504–509, 1993.
  6. Y. Ohno, K. Suzuki, and H. Tamura, “Corrosion of steel in cracked high strength concrete,” JCA Proceedings of Cement & Concrete, vol. 48, pp. 536–541, 1994 (Japanese). View at Google Scholar
  7. Y. Ohno, K. Suzuki, and H. Tamura, “Influence of various parameters on macrocell corrosion of steel in concrete,” in Proceeding of the Cement and Concrete (JCA '95), vol. 46, pp. 726–731, 1995.
  8. M. Raupach, “Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequences,” Construction and Building Materials, vol. 10, no. 5, pp. 329–338, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Maruya, H. Takeda, K. Horiguchi, S. Koyama, and K.-L. Hsu, “Simulation of steel corrosion in concrete based on the model of macro-cell corrosion circuit,” Journal of Advanced Concrete Technology, vol. 5, no. 3, pp. 343–362, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Poursaee, A. Laurent, and C. M. Hansson, “Corrosion of steel bars in OPC mortar exposed to NaCl, MgCl2 and CaCl2: macro- and micro-cell corrosion perspective,” Cement and Concrete Research, vol. 40, no. 3, pp. 426–430, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Andrade, I. R. Maribona, S. Feliu, J. A. González, and S. Feliu Jr., “The effect of macrocells between active and passive areas of steel reinforcements,” Corrosion Science, vol. 33, no. 2, pp. 237–249, 1992. View at Publisher · View at Google Scholar · View at Scopus
  12. Y.-S. Ji, W. Zhao, M. Zhou, H.-R. Ma, and P. Zeng, “Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments,” Construction and Building Materials, vol. 47, pp. 104–110, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Yuan, Y. Ji, and J. Jiang, “Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate,” Materials and Structures, vol. 42, no. 10, pp. 1443–1450, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Zou, J. Wang, and Y. Y. Zheng, “Electrochemical techniques for determining corrosion rate of rusted steel in seawater,” Corrosion Science, vol. 53, no. 1, pp. 208–216, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. L. Cao, M. Hibino, and H. Goda, “Effect of steel surface conditions on the macro-cell polarization behavior of reinforcing steel,” Applied Mechanics and Materials, vol. 584–586, pp. 1771–1779, 2014. View at Google Scholar