Table of Contents Author Guidelines Submit a Manuscript
Journal of Engineering
Volume 2016, Article ID 7615385, 19 pages
http://dx.doi.org/10.1155/2016/7615385
Research Article

The Hysteresis Performance and Restoring Force Model for Corroded Reinforced Concrete Frame Columns

1School of Civil Engineering, Zhengzhou University, Zhengzhou 450001, China
2Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen 518060, China

Received 14 August 2016; Accepted 5 October 2016

Academic Editor: Song Han

Copyright © 2016 Guifeng Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Yalciner, S. Sensoy, and O. Eren, “Time-dependent seismic performance assessment of a single-degree-of-freedom frame subject to corrosion,” Engineering Failure Analysis, vol. 19, no. 1, pp. 109–122, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. P. A. Sadegh, C. Dehghanian, and A. Kosari, “Corrosion protection of the reinforceing steels in chloride-laden concrete environment through exoxy/polyanilin-camphorsulfonate,” Corrosion Science, vol. 90, pp. 239–247, 2015. View at Google Scholar
  3. D.-E. Choe, P. Gardoni, D. Rosowsky, and T. Haukaas, “Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion,” Reliability Engineering and System Safety, vol. 93, no. 3, pp. 383–393, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Berto, R. Vitaliani, A. Saetta, and P. Simioni, “Seismic assessment of existing RC structures affected by degradation phenomena,” Structural Safety, vol. 31, no. 4, pp. 284–297, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Berto, A. Saetta, and P. Simioni, “Structural risk assessment of corroding RC structures under seismic excitation,” Construction and Building Materials, vol. 30, pp. 803–813, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. R. W. Clough, “Effect of stiffness degradation on earthquake ductility requirements,” Tech. Rep. SESM66-16, Department of Civil Engineering, University of California, Berkeley, Berkeley, Calif, USA, 1966. View at Google Scholar
  7. Z. Qu, “A collection of user-defined uniaxial hysteretic models for ABAQUS/Standard,” 2007, http://www.quzhe.net/PQFiber-en.htm.
  8. S. Malekpour and F. Dashti, “Application of the direct displacement based design methodology for different types of RC structural systems,” International Journal of Concrete Structures and Materials, vol. 7, no. 2, pp. 135–153, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Ramin and M. Fereidoonfar, “Finite element modeling and nonlinear analysis for seismic assessment of off-diagonal steel braced RC frame,” International Journal of Concrete Structures and Materials, vol. 9, no. 1, pp. 89–118, 2015. View at Publisher · View at Google Scholar
  10. Y. S. Yuan, F. P. Jia, and Y. Cai, “The structural behavior deterioration model for corroded reinforced concrete beams,” China Civil Engineering Journal, vol. 34, pp. 47–52, 2001. View at Google Scholar
  11. J.-K. Song, J. Kim, H.-B. Song, and J.-W. Song, “Effective punching shear and moment capacity of flat plate-column connection with shear reinforcements for lateral loading,” International Journal of Concrete Structures and Materials, vol. 6, no. 1, pp. 19–29, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. Q.-J. Chen, J. Cai, M. A. Bradford, X. Liu, and Z.-L. Zuo, “Seismic behaviour of a through-beam connection between concrete-filled steel tubular columns and reinforced concrete beams,” Engineering Structures, vol. 80, pp. 24–39, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. X. X. Chen, Study and Evaluation on Seismic Performance of Existing Reinforced Concrete Frame, Xi'an University of Architecture and Technology, Xi'an, China, 2011.
  14. T.-H. Kim, D.-J. Seong, and H. M. Shin, “Seismic performance assessment of hollow reinforced concrete and prestressed concrete bridge columns,” International Journal of Concrete Structures and Materials, vol. 6, no. 3, pp. 165–176, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. R. He, L. H. Sneed, and A. Belarbi, “Rapid repair of severely damaged RC columns with different damage conditions: an experimental study,” International Journal of Concrete Structures and Materials, vol. 7, no. 1, pp. 35–50, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. T.-H. Kim, “Comparison of totally prefabricated bridge substructure designed according to Korea Highway Bridge Design (KHBD) and AASHTO-LRFD,” International Journal of Concrete Structures and Materials, vol. 7, no. 4, pp. 319–332, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. H.-S. Lee, T. Kage, T. Noguchi, and F. Tomosawa, “An experimental study on the retrofitting effects of reinforced concrete columns damaged by rebar corrosion strengthened with carbon fiber sheets,” Cement and Concrete Research, vol. 33, no. 4, pp. 563–570, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. O. Ozcan, B. Binici, and G. Ozcebe, “Improving seismic performance of deficient reinforced concrete columns using carbon fiber-reinforced polymers,” Engineering Structures, vol. 30, no. 6, pp. 1632–1646, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Li, J. Gong, and L. Wang, “Seismic behavior of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel jacket,” Construction and Building Materials, vol. 23, no. 7, pp. 2653–2663, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Ma, Y. Che, and J. Gong, “Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading,” Construction & Building Materials, vol. 29, pp. 548–556, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Biondini, E. Camnasio, and A. Titi, “Seismic resilience of concrete structures under corrosion,” Earthquake Engineering & Structural Dynamics, vol. 44, no. 14, pp. 2445–2466, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Lubliner, J. Oliver, S. Oller, and E. Oñate, “A plastic damage model for concrete,” International Journal of Solids and Structures, vol. 25, no. 3, pp. 299–326, 1989. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Lee and G. L. Fenves, “Plastic-damage model for cyclic loading of concrete structures,” Journal of Engineering Mechanics, vol. 124, no. 8, pp. 892–900, 1998. View at Publisher · View at Google Scholar · View at Scopus
  24. U. Cicekli, G. Z. Voyiadjis, and R. K. Abu Al-Rub, “A plasticity and anisotropic damage model for plain concrete,” International Journal of Plasticity, vol. 23, no. 10-11, pp. 1874–1900, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. S. J. George and Y. Tian, “Structural performance of reinforced concrete flat plate buildings subjected to fire,” International Journal of Concrete Structures and Materials, vol. 6, no. 2, pp. 111–121, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. F. Fan, Z. G. Huang, J. M. Li, and L. G. Guo, “Research on cohesive property between reinforcement and concrete of corroded RC member,” Industrial Construction, vol. 29, pp. 49–51, 1999. View at Google Scholar
  27. H.-K. Liu and J. Li, “Constitutive law of attacked concrete,” Journal of Building Materials, vol. 14, no. 6, pp. 736–741, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. GB50010, Code for Design of Concrete Structures, National Standard of P.R. China, Architecture &Building Press, Beijing, China, 2011.
  29. V. Birtel and P. Mark, “Parameterised finite element modelling of RC beam shear failure,” in Proceedings of the ABAQUS Users' Conference, pp. 95–108, Boston, Mass, USA, 2006.
  30. X. L. Wang, X. Z. Lu, and L. P. Ye, “Numerical simulation for the hysteresis behavior of RC columns under cyclic loads,” Engineering Mechanics, vol. 24, no. 12, pp. 76–81, 2007. View at Google Scholar · View at Scopus
  31. Z. Qu, “.Predicting nonlinear response of an RC bridge pier subject to shake table motions,” in Proceedings of the 9th International Conference on Urban Earthquake Engineering (9CUEE '12), pp. 1717–1724, Tokyo, Japan, 2012.
  32. W.-L. Qu and Y. Wang, “Investigation on force-bearing capacity of corroded reinforced concrete beam by using nonlinear finite element analysis,” Journal of Wuhan University of Technology, vol. 29, no. 6, pp. 73–75, 2007. View at Google Scholar · View at Scopus
  33. W. L. Jin and J. Xia, “Influence of pitting corrosion on the bending capacity of reinforced concrete beams,” Building Structure, vol. 39, pp. 100–102, 2009. View at Google Scholar
  34. W. P. Zhang, D. F. Shang, and X. L. Gu, “Stress-strain relationship of corroded steel bars,” Journal of Tongji University (Natural Science), vol. 34, no. 5, pp. 586–592, 2006. View at Google Scholar · View at Scopus
  35. H. S. Lee, T. Noguchi, and F. Tomosawa, “FEM analysis for structure performance of deteriorated RC structures due to the corrosion of rebar,” in Proceedings of the 2nd International Conference on Concrete under Severe Conditions, pp. 327–336, E&FN Spon, Tromso, Norway, June 1998.
  36. X. H. Wang and T. Y. Zhong, “Relation between the loss coefficient of the corroded rebar's cross-section in concrete and that of its weight,” Research and Application of Building Materials, no. 1, pp. 4–6, 2005. View at Google Scholar
  37. MC90 CEB-FIP Model Code (1990), Design of Concrete Structures, British Standard Institution, London, UK, 1993.
  38. Y. Liang, X. Y. Luo, X. Q. Xiao, and Y. F. Zhang, “Experimental study on bond-slip performance of corroded reinforced concrete,” Industrial Construction, vol. 42, no. 10, pp. 95–100, 2012. View at Google Scholar
  39. “Code for seismic design of buildings,” National Standard of the People's Republic of China GB50011, China Architecture & Building Press, Beijing, China, 2010.
  40. R. Park, “Evaluation of ductility of structures and structural assemblages from laboratory testing,” Bulletin of the New Zealand National Society for Earthquake Engineering, vol. 22, no. 3, pp. 155–165, 1989. View at Google Scholar
  41. T. Takeda, M. A. Sozen, and N. N. Nielsen, “Reinforced concrete response to simulate earthquakes,” Journal of the Structural Division, ASCE, vol. 96, no. 12, pp. 2557–2573, 1970. View at Google Scholar
  42. J. C. Anderson and W. H. Townsend, “Models for RC frames with degrading stiffness,” Journal of the Structural Division, vol. 103, no. 12, pp. 2361–2376, 1977. View at Google Scholar · View at Scopus
  43. L. F. Ibarra, R. A. Medina, and H. Krawinkler, “Hysteretic models that incorporate strength and stiffness deterioration,” Earthquake Engineering & Structural Dynamics, vol. 34, no. 12, pp. 1489–1511, 2005. View at Publisher · View at Google Scholar · View at Scopus
  44. W. Shi, X. Lu, H. Guan, and L. Ye, “Development of seismic collapse capacity spectra and parametric study,” Advances in Structural Engineering, vol. 17, no. 9, pp. 1241–1255, 2014. View at Publisher · View at Google Scholar · View at Scopus
  45. J. P. Ou, Z. He, B. Wu, and F. W. Qiu, “Seismic damage performance-based design of reinforced concrete structures,” Earthquake Engineering and Engineering Vibration, vol. 19, pp. 21–30, 1999. View at Google Scholar
  46. ACI Committee 318, Building Code Requirements for Structural Concrete and Commentary (ACI318-08), American Concrete Institute, Farmington Hills, Miss, USA, 2008.
  47. J. Y. Shen, Analysis of Hysteresis Performance of the Corroded Reinforced Concrete Columns and Beams, Zhengzhou University, Zhengzhou, China, 2014.