Table of Contents Author Guidelines Submit a Manuscript
Journal of Engineering
Volume 2018, Article ID 9487070, 10 pages
https://doi.org/10.1155/2018/9487070
Research Article

Effect of Flow Attack Angle for V-Wavy Plate on Flow and Heat Transfer in a Square Channel Heat Exchanger

1Department of Mechanical Engineering Technology, College of Industrial Technology, King Mongkut’s University of Technology North Bangkok, Bangkok 10800, Thailand
2Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand

Correspondence should be addressed to Withada Jedsadaratanachai; ht.ca.ltimk@dahtiwjk

Received 8 May 2017; Accepted 24 October 2017; Published 30 January 2018

Academic Editor: Felix Sharipov

Copyright © 2018 Amnart Boonloi and Withada Jedsadaratanachai. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Kumar, R. Chauhan, M. Sethi, and A. Kumar, “Experimental study and correlation development for Nusselt number and friction factor for discretized broken V-pattern baffle solar air channel,” Experimental Thermal and Fluid Science, vol. 81, pp. 56–75, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Jedsadaratanachai, N. Jayranaiwachira, and P. Promvonge, “3D numerical study on flow structure and heat transfer in a circular tube with V-baffles,” Chinese Journal of Chemical Engineering, vol. 23, no. 2, pp. 342–349, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. W. Jedsadaratanachai and A. Boonloi, “Effects of blockage ratio and pitch ratio on thermal performance in a square channel with 30° double V-baffles,” Case Studies in Thermal Engineering, vol. 4, pp. 118–128, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Caliskan and S. Baskaya, “Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs,” International Journal of Heat and Mass Transfer, vol. 55, no. 21-22, pp. 6260–6277, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Jin, J. Zuo, S. Quan, S. Xu, and H. Gao, “Thermohydraulic performance of solar air heater with staggered multiple V-shaped ribs on the absorber plate,” Energy, vol. 127, pp. 68–77, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. N. S. Deo, S. Chander, and J. S. Saini, “Performance analysis of solar air heater duct roughened with multigap V-down ribs combined with staggered ribs,” Journal of Renewable Energy, vol. 91, pp. 484–500, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Promthaisong, P. Eiamsa-ard, W. Jedsadaratanachai, and S. Eiamsa-ard, “Turbulent heat transfer and pressure loss in a square channel with discrete broken V-rib turbulators,” Journal of Hydrodynamics, Series B, vol. 28, no. 2, pp. 275–283, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Fang, Z. Yang, B.-C. Wang, M. F. Tachie, and D. J. Bergstrom, “Highly-disturbed turbulent flow in a square channel with V-shaped ribs on one wall,” International Journal of Heat and Fluid Flow, vol. 56, pp. 182–197, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Maithani and J. S. Saini, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with V-ribs with symmetrical gaps,” Experimental Thermal and Fluid Science, vol. 70, pp. 220–227, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Jin, M. Zhang, P. Wang, and S. Xu, “Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped ribs on the absorber plate,” Energy, vol. 89, pp. 178–190, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Lotfi, M. Zeng, B. Sundén, and Q. Wang, “3D numerical investigation of flow and heat transfer characteristics in smooth wavy fin-and-elliptical tube heat exchangers using new type vortex generators,” Energy, vol. 73, pp. 233–257, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Dong, L. Su, Q. Chen, and W. Xu, “Experimental study on thermal-hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger,” Applied Thermal Engineering, vol. 51, no. 1-2, pp. 32–39, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Dong, J. Chen, W. Zhang, and J. Hu, “Experimental and numerical investigation of thermal -hydraulic performance in wavy fin-and-flat tube heat exchangers,” Applied Thermal Engineering, vol. 30, no. 11-12, pp. 1377–1386, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Gong, C. Min, C. Qi, E. Wang, and L. Tian, “Numerical simulation of flow and heat transfer characteristics in wavy fin-and-tube heat exchanger with combined longitudinal vortex generators,” International Communications in Heat and Mass Transfer, vol. 43, pp. 53–56, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. X. Du, L. Feng, L. Li, L. Yang, and Y. Yang, “Heat transfer enhancement of wavy finned flat tube by punched longitudinal vortex generators,” International Journal of Heat and Mass Transfer, vol. 75, pp. 368–380, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Du, L. Feng, Y. Yang, and L. Yang, “Experimental study on heat transfer enhancement of wavy finned flat tube with longitudinal vortex generators,” Applied Thermal Engineering, vol. 50, no. 1, pp. 55–62, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Boonloi and W. Jedsadaratanachai, “Laminar forced convection and heat transfer characteristics in a square channel equipped with V-wavy surface,” Journal of Mathematics and Statistics, vol. 13, no. 3, pp. 251–260, 2017. View at Google Scholar