Table of Contents Author Guidelines Submit a Manuscript
Journal of Energy
Volume 2016 (2016), Article ID 2438431, 14 pages
http://dx.doi.org/10.1155/2016/2438431
Research Article

A Thermodynamic Analysis of Two Competing Mid-Sized Oxyfuel Combustion Combined Cycles

Division of Fluid Dynamics, Department of Applied Mechanics, Chalmers University of Technology, 412 96 Gothenburg, Sweden

Received 4 September 2015; Accepted 21 December 2015

Academic Editor: Umberto Desideri

Copyright © 2016 Egill Thorbergsson and Tomas Grönstedt. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. IPCC, “2013: Summary for policymakers,” in Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, T. Stocker, D. Qin, G.-K. Plattner et al., Eds., Cambridge University Press, Cambridge, UK, 2013. View at Google Scholar
  2. B. Metz, O. Davidson, H. de Coninck, M. Loos, and L. Meyer, “IPCC special report on carbon dioxide capture and storage,” Tech. Rep., Intergovernmental Panel on Climate Change, Working Group III, Geneva, Switzerland, 2005. View at Google Scholar
  3. F. Bolland, R. Naqvi, R. Span et al., “Public summary report of ENCAP delivarables D6.1.4 evaluation of technologies and benchmarking based on reference cases and D6.2.1 modelling, design and operational analysis,” Tech. Rep., 2007, http://www.encapco2.org/. View at Google Scholar
  4. O. Bolland and S. Sæther, “New concepts for natural gas fired power plants which simplify the recovery of carbon dioxide,” Energy Conversion and Management, vol. 33, no. 5–8, pp. 467–475, 1992. View at Publisher · View at Google Scholar · View at Scopus
  5. I. Ulizar and P. Pilidis, “A semiclosed-cycle gas turbine with carbon dioxide-argon as working fluid,” Journal of Engineering for Gas Turbines and Power, vol. 119, no. 3, pp. 612–616, 1997. View at Publisher · View at Google Scholar · View at Scopus
  6. I. Ulizar and P. Pilidis, “Design of a semiclosed-cycle gas turbine with carbon dioxide: argon as working fluid,” Journal of Engineering for Gas Turbines and Power, vol. 120, no. 2, pp. 330–335, 1998. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Ulizar and P. Pilidis, “Handling of a semiclosed cycle gas turbine with a carbon dioxide-argon working fluid,” Journal of Engineering for Gas Turbines and Power, vol. 122, no. 3, pp. 437–441, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Bolland and P. Mathieu, “Comparison of two CO2 removal options in combined cycle power plants,” Energy Conversion and Management, vol. 39, no. 16–18, pp. 1653–1663, 1998. View at Publisher · View at Google Scholar
  9. J.-M. Amann, M. Kanniche, and C. Bouallou, “Natural gas combined cycle power plant modified into an O2/CO2 cycle for CO2 capture,” Energy Conversion and Management, vol. 50, no. 3, pp. 510–521, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. S. H. Tak, S. K. Park, T. S. Kim, J. L. Sohn, and Y. D. Lee, “Performance analyses of oxy-fuel power generation systems including CO2 capture: comparison of two cycles using different recirculation fluids,” Journal of Mechanical Science and Technology, vol. 24, no. 9, pp. 1947–1954, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Jordal, O. Bollard, and A. Klang, “Aspects of cooled gas turbine modeling for the semi-closed O2/CO2 cycle with CO2 capture,” Journal of Engineering for Gas Turbines and Power, vol. 126, no. 3, pp. 507–515, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. R. E. Ulfsnes, O. Bolland, and K. Jordal, “Modelling and simulation of transient performance of the semi-closed O2/CO2 gas turbine cycle for CO2-capture,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, GT2003-38068, Atlanta, Ga, USA, June 2003. View at Publisher · View at Google Scholar
  13. R. Ulfsnes, G. Karlsen, K. Jordal, O. Bolland, and H. M. Kvamsdal, “Investigation of physical properties of CO2/H2O-mixtures for use in semi-closed O2/CO2 gas turbine cycle with CO2-capture,” in Proceedings of the 16th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems (ECOS '03), Copenhagen, Denmark, June 2003.
  14. G. Corchero, V. P. Timón, and J. L. Montañés, “A natural gas oxy-fuel semiclosed combined cycle for zero CO2 emissions: a thermodynamic optimization,” Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, vol. 225, no. 4, pp. 377–388, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Riethmann, F. Sander, and R. Span, “Modelling of a supercharged semi-closed oxyfuel combined cycle with CO2 capture and analysis of the part-load behavior,” Energy Procedia, vol. 1, no. 1, pp. 415–422, 2009. View at Publisher · View at Google Scholar
  16. H. J. Yang, D. W. Kang, J. H. Ahn, and T. S. Kim, “Evaluation of design performance of the semi-closed oxy-fuel combustion combined cycle,” Journal of Engineering for Gas Turbines and Power, vol. 134, Article ID 111702, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Dahlquist, M. Genrup, M. Sjoedin, and K. Jonshagen, “Optimization of an oxyfuel combined cycle regarding performance and complexity level,” in Proceedings of the ASME Turbo Expo 2013: Power for Land, Sea and Air, GT2013-94755, American Society of Mechanical Engineers, San Antonio, Tex, USA, 2013.
  18. M. Sammak, E. Thorbergsson, T. Grönstedt, and M. Genrup, “Conceptual mean-line design of single and twin-shaft oxy-fuel gas turbine in a semiclosed oxy-fuel combustion combined cycle,” Journal of Engineering for Gas Turbines and Power, vol. 135, no. 8, Article ID 081502, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Jericha, “Efficient steam cycles with internal combustion of hydrogen and stoichiometric oxygen for turbines and piston engines,” International Journal of Hydrogen Energy, vol. 12, no. 5, pp. 345–354, 1987, CIMAC Conference Paper, Oslo, Norway. View at Publisher · View at Google Scholar
  20. H. Jericha, W. Sanz, J. Woisetschläger, and M. Fesharaki, “CO2-retention capability of CH4/O2-fired graz cycle,” in Proceedings of the CIMAC World Congress on Combustion Engine Technology, Paper G07, pp. 1–13, Interlaken, Switzerland, 1995.
  21. H. Jericha and E. Göttlich, “Conceptual design for an industrial prototype Graz cycle power plant,” in Proceedings of the ASME Turbo Expo 2002: Power for Land, Sea and Air, GT2002-30118, American Society of Mechanical Engineers, Amsterdam, The Netherlands, June 2002.
  22. F. Heitmeir, W. Sanz, E. Göttlich, and H. Jericha, “The graz cycle-a zero emission power plant of highest efficiency,” in XXXV Kraftwerkstechnisches Kolloquium, Dresden, Germany, September 2003.
  23. H. Jericha, E. Göttlich, W. Sanz, and F. Heitmeir, “Design optimization of the graz cycle prototype plant,” Journal of Engineering for Gas Turbines and Power, vol. 126, no. 4, pp. 733–740, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. F. Heitmeir and H. Jericha, “Turbomachinery design for the Graz cycle: an optimized power plant concept for CO2 retention,” Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, vol. 219, no. 2, pp. 147–155, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Sanz, H. Jericha, F. Luckel, E. Göttlich, and F. Heitmeir, “A further step towards a Graz cycle power plant for CO2 capture,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, GT2005-68456, pp. 181–190, American Society of Mechanical Engineers, Reno, Nev, USA, June 2005. View at Publisher · View at Google Scholar
  26. W. Sanz, H. Jericha, M. Moser, and F. Heitmeir, “Thermodynamic and economic investigation of an improved Graz Cycle power plant for CO2 capture,” Journal of Engineering for Gas Turbines and Power, vol. 127, no. 4, pp. 765–772, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. M. H. Jericha, M. W. Sanz, and M. E. Goettlich, “Gasturbine with CO2 retention—400 MW oxyfuel-system Graz cycle,” in Proceedings of the CIMAC World Congress on Combustion Engine Technology, Vienna, Austria, May 2007.
  28. H. Jericha, W. Sanz, and E. Göttlich, “Design concept for large output graz cycle gas turbines,” Journal of Engineering for Gas Turbines and Power, vol. 130, no. 1, Article ID 011701, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Jericha, W. Sanz, E. Göttlich, and F. Neumayer, “Design details of a 600 mw Graz cycle thermal power plant for CO2 capture,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, GT2008-50515, pp. 507–516, American Society of Mechanical Engineers, Berlin, Germany, June 2008. View at Publisher · View at Google Scholar
  30. H. Kvamsdal, O. Maurstad, K. Jordal, and O. Bolland, “Benchmarking of gas-turbine cycles with CO2 capture,” in Proceedings of the 7th International Conference on Greenhouse Gas Control Technologies, vol. 1, pp. 233–242, Vancouver, Canada, September 2004.
  31. F. Franco, T. Mina, G. Woolatt, M. Rost, and O. Bolland, “Characteristics of cycle components for CO2 capture,” in Proceedings of the 8th International Conference on Greenhouse Gas Control Technologies, Trondheim, Norway, June 2006.
  32. H. M. Kvamsdal, K. Jordal, and O. Bolland, “A quantitative comparison of gas turbine cycles with CO2 capture,” Energy, vol. 32, no. 1, pp. 10–24, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. W. Sanz, H. Jericha, B. Bauer, and E. Göttlich, “Qualitative and quantitative comparison of two promising oxy-fuel power cycles for CO2 capture,” Journal of Engineering for Gas Turbines and Power, vol. 130, no. 3, Article ID 031702, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Woollatt and F. Franco, “Natural gas oxy-fuel cycles-part 1: conceptual aerodynamic design of turbo-machinery components,” Energy Procedia, vol. 1, pp. 573–580, 2009. View at Google Scholar
  35. E. Thorbergsson, T. Grönstedt, M. Sammak, and M. Genrup, “A comparative analysis of two competing mid-size oxy-fuel combustion cycles,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, GT2012-69676, pp. 375–383, American Society of Mechanical Engineers, Copenhagen, Denmark, June 2012. View at Publisher · View at Google Scholar
  36. P. Mathieu and O. Bolland, “Comparison of costs for natural gas power generation with CO2 capture,” Energy Procedia, vol. 37, pp. 2406–2419, 2013. View at Google Scholar
  37. O. Bolland and H. Undrum, “A novel methodology for comparing CO2 capture options for natural gas-fired combined cycle plants,” Advances in Environmental Research, vol. 7, no. 4, pp. 901–911, 2003. View at Publisher · View at Google Scholar · View at Scopus
  38. SimTech Simulation Technology, User Documentation: Program Modules and Model Libraries, IPSEpro Process Simulator, 2003.
  39. E. Thorbergsson, T. Grönstedt, and C. Robinson, “Integration of fluid thermodynamic and transport properties in conceptual turbomachinery design,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, GT2013-95833, American Society of Mechanical Engineers, San Antonio, Tex, USA, June 2013. View at Publisher · View at Google Scholar
  40. G. Halls, “Air cooling of turbine blades and vanes: an account of the history and development of gas turbine cooling,” Aircraft Engineering and Aerospace Technology, vol. 39, no. 8, pp. 4–14, 1967. View at Publisher · View at Google Scholar
  41. M. J. Holland and T. F. Thake, “Rotor blade cooling in high pressure turbines,” Journal of Aircraft, vol. 17, no. 6, pp. 412–418, 1980. View at Publisher · View at Google Scholar · View at Scopus
  42. K. Jordal, Modeling and performance of gas turbine cycles with various means of blade cooling [Ph.D. thesis], Department of Heat and Power Engineering, Lund University, 2001.
  43. O. Bolland and J. F. Stadaas, “Comparative evaluation of combined cycles and gas turbine systems with water injection, steam injection, and recuperation,” Journal of Engineering for Gas Turbines and Power, vol. 117, no. 1, pp. 138–145, 1995. View at Publisher · View at Google Scholar · View at Scopus
  44. M. A. El-Masri, “On thermodynamics of gas-turbine cycles: Part 2—a model for expansion in cooled turbines,” Journal of Engineering for Gas Turbines and Power, vol. 108, no. 1, pp. 151–159, 1986. View at Publisher · View at Google Scholar · View at Scopus
  45. K. Jordal, L. Torbidoni, and A. Massardo, “Convective blade cooling modelling for the analysis of innovative gas turbine cycles,” in Proceedings of the ASME Turbo Expo 2001: Power for Land, Sea and Air, GT2001-0390, American Society of Mechanical Engineers, New Orleans, La, USA, 2001.
  46. J. H. Horlock, D. T. Watson, and T. V. Jones, “Limitations of gas turbine performance imposed by large turbine cooling flows,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 3, pp. 487–494, 2001. View at Publisher · View at Google Scholar · View at Scopus
  47. K. Jordal, Gas turbine cooling modeling—thermodynamic analysis and cycle simulations [Licentiate thesis], Department of Heat and Power Engineering, Lund University, Lund, Sweden, 1999.
  48. R. C. Wilcock, J. B. Young, and J. H. Horlock, “The effect of turbine blade cooling on the cycle efficiency of gas turbine power cycles,” Journal of Engineering for Gas Turbines and Power, vol. 127, no. 1, pp. 109–120, 2005. View at Publisher · View at Google Scholar · View at Scopus
  49. M. Mallen and G. Saville, Polytropic Processes in the Performance Prediction of Centrifugal Compressors, I. Mech. E. Conference Publications, Institution of Mechanical Engineers, London, UK, 1977.
  50. W. Traupel, Thermische Turbomaschinen, Springer, Berlin, Germany, 1977.
  51. F. Di Maria and K. Jordal, “Blade cooling model comparison and thermodynamic analysis,” in Proceedings of the 5th ASME/JSME Joint Thermal Engineering Conference, AJTE99-6117, American Society of Mechanical Engineers, San Diego, Calif, USA, March 1999.
  52. A. Dahlquist, M. Thern, and M. Genrup, “The inuence from the working medium on the profile loss in compressor and turbine airfoils,” in Proceedings of the ASME Turbo Expo 2014: Power for Land, Sea and Air, GT2014-25069, American Society of Mechanical Engineers, Düsseldorf, Germany, 2014.
  53. S. G. Sundkvist, A. Dahlquist, J. Janczewski et al., “Concept for a combustion system in oxyfuel gas turbine combined cycles,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 10, Article ID 101513, 2014. View at Publisher · View at Google Scholar · View at Scopus
  54. I. Pfaff and A. Kather, “Comparative thermodynamic analysis and integration issues of CCS steam power plants based on oxycombustion with cryogenic or membrane based air separation,” Energy Procedia, vol. 1, pp. 495–502, 2009. View at Google Scholar
  55. J. Tranier, N. Perrin, and A. Darde, “Update on advanced developments for ASU and CO2 purification units for oxy-combustion (air liquide, France),” in Proceedings of the 3rd Meeting of the Oxy-Fuel Combustion Network, IEAGHG International Oxy-Combustion Network, Yokohama, Japan, March 2008.
  56. K. Jeong, M. J. Kessen, H. Bilirgen, and E. K. Levy, “Analytical modeling of water condensation in condensing heat exchanger,” International Journal of Heat and Mass Transfer, vol. 53, no. 11-12, pp. 2361–2368, 2010. View at Publisher · View at Google Scholar · View at Scopus