Table of Contents Author Guidelines Submit a Manuscript
Journal of Healthcare Engineering
Volume 3 (2012), Issue 1, Pages 53-86
http://dx.doi.org/10.1260/2040-2295.3.1.53
Research Article

Surgical Engineering in Cranio-Maxillofacial Surgery: A Literature Review

Raphael Olszewski

Oral and Maxillofacial Surgery Research Lab, Department of oral and maxillofacial surgery, Cliniques universitaires saint Luc, Université catholique de Louvain, Brussels, Belgium

Received 1 March 2011; Accepted 1 August 2011

Copyright © 2012 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Kim, P. Jürgens, S. Weber, L. P. Nolte, and M. Reyes, “A new soft-tissue simulation strategy for cranio-maxillofacial surgery using facial muscle template model,” Prog Biophys Mol Biol., vol. 103, no. 2-3, pp. 284–291, 2010. View at Google Scholar
  2. G. G. Barbarino, M. Jabareen, J. Trzewik, A. Nkengne, G. Stamatas, and E. Mazza, “Development and validation of a three-dimensional finite element model of the face,” J Biomech Eng., vol. 131, no. 4, 041006, 2009. View at Google Scholar
  3. L. Beldie, B. Walker, Y. Lu, S. Richmond, and J. Middleton, “Finite element modelling of maxillofacial surgery and facial expressions—a preliminary study,” Int J Med Robot., vol. 6, no. 4, pp. 422–430, 2010. View at Google Scholar
  4. D. Wang, L. Cheng, C. Wang, Y. Qian, and X. Pan, “Biomechanical analysis of rapid maxillary expansion in the UCLP patient,” Med Eng Phys., vol. 31, no. 3, pp. 409–417, 2009. View at Google Scholar
  5. C. Kober, S. Stübinger, C. Hellmich, R. Sader, and H. F. Zeilhofer, “Mandibular finite element simulation as a tool for trauma surgery,” Int J Comput Dent., vol. 11, no. 3-4, pp. 175–181, 2008. View at Google Scholar
  6. H. H. Korkmaz, “Evaluation of different miniplates in fixation of fractured human mandible with the finite element method,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 103, no. 6, pp. e1–e13, 2007. View at Google Scholar
  7. S. Lovald, B. Baack, C. Gaball, G. Olson, and A. Hoard, “Biomechanical optimization of bone plates used in rigid fixation of mandibular symphysis fractures,” J Oral Maxillofac Surg., vol. 68, no. 8, pp. 1833–1841, 1833. View at Google Scholar
  8. B. Ji, C. Wang, L. Liu, J. Long, W. Tian, and H. Wang, “A biomechanical analysis of titanium miniplates used for treatment of mandibular symphyseal fractures with the finite element method,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 109, no. 3, pp. e21–e27, 2010. View at Google Scholar
  9. T. Cox, M. W. Kohn, and T. Impelluso, “Computerized analysis of resorbable polymer plates and screws for the rigid fixation of mandibular angle fractures,” J Oral Maxillofac Surg., vol. 61, no. 4, pp. 481–487, 2003, discussion 487-488. View at Google Scholar
  10. J. Al-Sukhun, C. Lindqvist, and R. Kontio, “Modelling of orbital deformation using finite-element analysis,” J R Soc Interface., vol. 3, no. 7, pp. 255–262, 2006. View at Google Scholar
  11. V. Luboz, M. Chabanas, P. Swider, and Y. Payan, “Orbital and maxillofacial computer aided surgery: patient-specific finite element models to predict surgical outcomes,” Comput Methods Biomech Biomed Engin., vol. 8, no. 4, pp. 259–265, 2005. View at Google Scholar
  12. A. Sutradhar, G. H. Paulino, M. J. Miller, and T. H. Nguyen, “Topological optimization for designing patient-specific large craniofacial segmental bone replacements,” Proc Natl Acad Sci USA., vol. 107, no. 30, pp. 13222–13227, 2010. View at Google Scholar
  13. A. Szucs, P. Bujtár, G. K. Sándor, and J. Barabás, “Finite element analysis of the human mandible to assess the effect of removing an impacted third molar,” J Can Dent Assoc., vol. 76, a72, 2010. View at Google Scholar
  14. R. C. van Staden, H. Guan, N. W. Johnson, Y. C. Loo, and N. Meredith, “Step-wise analysis of the dental implant insertion process using the finite element technique,” Clin Oral Implants Res., vol. 19, no. 3, pp. 303–313, 2008. View at Google Scholar
  15. H. L. Huang, L. J. Fuh, C. C. Ko, J. T. Hsu, and C. C. Chen, “Biomechanical effects of a maxillary implant in the augmented sinus: a three-dimensional finite element analysis,” Int J Oral Maxillofac Implants., vol. 24, no. 3, pp. 455–462, 2009. View at Google Scholar
  16. D. Remmler, L. Olson, D. Duke, R. Ekstrom, D. Matthews, and C. G. Ullrich, “Presurgical finite element analysis from routine computed tomography studies for craniofacial distraction: II. An engineering prediction model for gradual correction of asymmetric skull deformities,” Plast Reconstr Surg., vol. 102, no. 5, pp. 1395–1404, 1998. View at Google Scholar
  17. D. Remmler, L. Olson, R. Ekstrom et al., “Pre-surgical CT/FEA for craniofacial distraction: I. Methodology, development, and validation of the cranial finite element model,” Med Eng Phys., vol. 20, no. 8, pp. 607–619, 1998. View at Google Scholar
  18. F. Veziroglu and D. Yilmaz, “Biomechanical evaluation of the consolidation period of alveolar distraction osteogenesis with three-dimensional finite element analysis,” Int J Oral Maxillofac Surg., vol. 37, no. 5, pp. 448–452, 2008. View at Google Scholar
  19. S. P. Edwards, “Computer-assisted craniomaxillofacial surgery,” Oral Maxillofac Surg Clin North Am., vol. 22, no. 1, pp. 117–134, 2010, Review. View at Google Scholar
  20. U. Meyer, T. Stamm, N. Meier, and U. Joos, “First experience with a public domain computer-aided surgical system,” Br J Oral Maxillofac Surg., vol. 40, no. 2, pp. 96–104, 2002. View at Google Scholar
  21. D. E. Altobelli, R. Kikinis, J. B. Mulliken, H. Cline, W. Lorensen, and F. Jolesz, “Computer-assisted three-dimensional planning in craniofacial surgery,” Plast Reconstr Surg., vol. 92, no. 4, pp. 576–585, 1993, discussion 586-587. View at Google Scholar
  22. J. Vander Sloten, K. Degryse, R. Gobin, G. Van der Perre, and M. Y. Mommaerts, “Interactive simulation of cranial surgery in a computer aided design environment,” J Craniomaxillofac Surg., vol. 24, no. 2, pp. 122–129, 1996. View at Google Scholar
  23. G. Jans, J. Vander Sloten, R. Gobin, G. Van der Perre, R. Van Audekercke, and M. Mommaerts, “Computer-aided craniofacial surgical planning implemented in CAD software,” Comput Aided Surg., vol. 4, no. 3, pp. 117–128, 1999. View at Google Scholar
  24. E. Gladilin and A. Ivanov, “Computational modelling and optimisation of soft tissue outcome in cranio-maxillofacial surgery planning,” Comput Methods Biomech Biomed Engin., vol. 12, no. 3, pp. 305–318, 2009. View at Google Scholar
  25. Y. S. Jayaratne, R. A. Zwahlen, J. Lo, S. C. Tam, and L. K. Cheung, “Computer-aided maxillofacial surgery: an update,” Surg Innov., vol. 17, no. 3, pp. 217–225, 2010, Review. View at Google Scholar
  26. K. L. Erickson, W. H. Bell, and D. H. Goldsmith, “Analytical model surgery,” in Modern practice in orthognathic and reconstructive surgery, W. H. Bell, Ed., pp. 154–216, Saunders, USA, 1992. View at Google Scholar
  27. H. Boutault and H. Cadenat, “Stratégie de la décision en chirurgie orthognathique,” Rev Stomatol Chir Maxillofac., vol. 93, no. 1, pp. 287–297, 1992. View at Google Scholar
  28. M. Vesse, “Que reste-t-il de l'examen clinique en chirurgie orthopédique des maxillaires en 1991?” Rev Stomatol Chir Maxillofac., vol. 93, no. 1, pp. 13–19, 1992. View at Google Scholar
  29. J. Rustemeyer, A. Groddeck, S. Zwerger, and A. Bremerich, “The accuracy of two-dimensional planning for routine orthognathic surgery,” Br J Oral Maxillofac Surg., vol. 48, no. 4, pp. 271–275, 2010. View at Google Scholar
  30. J. Gateno, K. K. Forrest, and B. Camp, “A comparison of three methods of face bow transfer recording: Implications for orthognathic surgery,” J Oral Maxillofac Surg., vol. 59, no. 6, pp. 635–640, 2001. View at Google Scholar
  31. T. H. Hohl, “The use of an anatomic articulator in segmental orthognathic surgery,” Am J Orthod., vol. 73, no. 4, pp. 428–442, 1978. View at Google Scholar
  32. E. Ellis III, “Accuracy of model surgery: Evaluation of an old technique and introduction of a new one,” J Oral Maxillofac Surg., vol. 48, no. 11, pp. 1161–1167, 1990. View at Google Scholar
  33. E. Ellis III, “Bimaxillary surgery using an intermediate splint to position the maxilla,” J Oral Maxillofac Surg., vol. 57, no. 1, pp. 53–56, 1999. View at Google Scholar
  34. T. H. Lapp, “Bimaxillary surgery without the use of an intermediate splint to position the maxilla,” J Oral Maxillofac Surg., vol. 57, no. 1, pp. 57–60, 1999. View at Google Scholar
  35. M. A. Bamber and M. Harris, “The role of the occlusal wafer in orthognathic surgery: a comparison of thick and thin intermediate osteotomy wafers,” J Craniomaxillofac Surg., vol. 23, no. 6, pp. 396–400, 1995. View at Google Scholar
  36. J. Delaire, “Pitfalls in the interpretation of cephalometric teleradiography,” Rev Stomatol Chir Maxillofac., vol. 85, no. 3, pp. 176–185, 1984. View at Google Scholar
  37. H. L. Da Silveira and H. E. Silveira, “Reproducibility of cephalometric measurements made by three radiology clinics,” Angle Orthod., vol. 76, no. 3, pp. 394–399, 2006. View at Google Scholar
  38. W. J. B. Houston, R. E. Maher, D. McElroy, and M. Sherriff, “Sources of error in measurements from cephalometric radiographs,” Eur J Orthod., vol. 8, no. 3, pp. 149–151, 1986. View at Google Scholar
  39. E. M. Ongkosuwito, C. Katsaros, M. A. van 't Hof , J. C. Bodegom, and A. M. Kuijpers-Jagtman, “The reproducibility of cephalometric measurements: a comparison of analogue and digital methods,” Eur J Orthod., vol. 24, no. 6, pp. 655–665, 2002. View at Google Scholar
  40. R. Olszewski and H. Reychler, “Limitations of orthognathic model surgery: theoretical and practical implications,” Rev Stomatol Chir Maxillofac., vol. 105, no. 3, pp. 165–169, 2004. View at Google Scholar
  41. J. V. Marko, “Simple hinge and semiadjustable articulators in orthognathic surgery,” Am J Orthod Dentofac Orthop., vol. 90, pp. 37–44, 1986. View at Google Scholar
  42. A. Nattestad and P. Vedtofte, “Pitfalls in orthognathic model surgery. The significance of using different reference lines and points during model surgery and operation,” Int J Oral Maxillofac Surg., vol. 23, no. 1, pp. 11–15, 1994. View at Google Scholar
  43. J. N. Gil, J. P. D. Claus, R. Manfro, and S. M. Lima Jr., “Predictability of maxillary repositioning during bimaxillary surgery: accuracy of a new technique,” Int J Oral Maxillofac Surg., vol. 36, no. 4, pp. 296–300, 2007. View at Google Scholar
  44. J. C. Barbenel, P. E. Paul, B. S. Khambay, F. S. Walker, K. F. Moos, and A. F. Ayoub, “Errors in orthognathic surgery planning: the effect of inaccurate study model orientation,” Int J Oral Maxillofac Surg., vol. 39, no. 11, pp. 1103–1108, 2010. View at Google Scholar
  45. H. Popat, S. Richmond, and N. A. Drage, “New developments in: three-dimensional planning for orthognathic surgery,” J Orthod., vol. 37, no. 2, pp. 62–71, 2010. View at Google Scholar
  46. J. J. Xia, J. Gateno, J. F. Teichgraeber et al., “Accuracy of the computer-aided surgical simulation (CASS) system in the treatment of patients with complex craniomaxillofacial deformity: A pilot study,” J Oral Maxillofac Surg., vol. 65, no. 2, pp. 248–254, 2007. View at Google Scholar
  47. J. Gateno, J. Xia, J. F. Teichgraeber, and A. Rosen, “A new technique for the creation of a computerized composite skull model,” J Oral Maxillofac Surg., vol. 61, no. 2, pp. 222–227, 2003. View at Google Scholar
  48. M. Z'Graggen, H. J. Schiel, C. Kunz, and J. T. Lambrecht, “Three-dimensional cephalometry using individual skeletal laser technology models,” Clin Anat., vol. 14, no. 4, pp. 258–268, 2001. View at Google Scholar
  49. G. R. Swennen, W. Mollemans, and F. Schutyser, “Three-dimensional treatment planning of orthognathic surgery in the era of virtual imaging,” J Oral Maxillofac Surg., vol. 67, no. 10, pp. 2080–2092, 2080. View at Google Scholar
  50. S. Loh and M. Yow, “Computer prediction of hard tissue profiles in orthognathic surgery,” Int J Adult Orthodon Orthognath Surg., vol. 17, no. 4, pp. 342–347, 2002. View at Google Scholar
  51. S. Tucker, L. H. Cevidanes, M. Styner et al., “Comparison of actual surgical outcomes and 3-dimensional surgical simulations,” J Oral Maxillofac Surg., vol. 68, no. 10, pp. 2412–2421, 2010. View at Google Scholar
  52. F. Calignano and E. Vezzetti, “Soft tissue diagnosis in maxillofacial surgery: a preliminary study on three-dimensional face geometrical features-based analysis,” Aesthetic Plast Surg., vol. 34, no. 2, pp. 200–211, 2010. View at Google Scholar
  53. M. Y. Hajeer, A. F. Ayoub, D. T. Millett, M. Bock, and J. P. Siebert, “Three-dimensional imaging in orthognathic surgery: the clinical application of a new method,” Int J Adult Orthodon Orthognath Surg., vol. 17, no. 4, pp. 318–330, 2002. View at Google Scholar
  54. A. J. Naftel and M. J. Trenouth, “Stereo-assisted landmark detection for the analysis of changes in 3-D facial shape,” Med Inform Internet Med., vol. 29, no. 2, pp. 137–155, 2004. View at Google Scholar
  55. G. A. Ramieri, M. C. Spada, A. Nasi et al., “Reconstruction of facial morphology from laser scanned data. Part I: reliability of the technique,” Dentomaxillofac Radiol., vol. 35, no. 3, pp. 158–164, 2006. View at Google Scholar
  56. A. Ayoub, A. Garrahy, C. Hood et al., “Validation of a vision-based, three-dimensional facial imaging system,” Cleft Palate Craniofac J., vol. 40, no. 5, pp. 523–529, 2003. View at Google Scholar
  57. H. T. Lübber, L. Medinger, A. Kruse, K. W. Grätz, and F. Matthews, “Precision and accuracy of the 3dMD photogrammetric system in craniomaxillofacial application,” J Craniofac Surg., vol. 21, no. 3, pp. 763–767, 2010. View at Google Scholar
  58. B. Khambay, J. C. Nebel, J. Bowman, F. Walker, D. M. Hadley, and A. Ayoub, “3D stereophotogrammetric image superimposition onto 3D CT scan images: the future of orthognathic surgery. A pilot study,” Int J Adult Orthodon Orthognath Surg., vol. 17, no. 4, pp. 331–341, 2002. View at Google Scholar
  59. R. A. Mischkowski, J. Bongartz, D. Giel, S. Frey, A. Thelen, and P. Hering, “Holographic face models as planning tool in maxillofacial surgery,” Int J Comput Dent., vol. 7, no. 4, pp. 339–345, 2004. View at Google Scholar
  60. N. Noguchi, M. Tsuji, M. Shigematsu, and M. Goto, “An orthognathic simulation system integrating teeth, jaw and face data using 3D cephalometry,” Int J Oral Maxillofac Surg., vol. 36, no. 7, pp. 640–645, 2007. View at Google Scholar
  61. J. Uechi, M. Okayama, T. Shibata et al., “A novel method for the 3-dimensional simulation of orthognathic surgery by using a multimodal image-fusion technique,” Am J Orthod Dentofacial Orthop., vol. 130, no. 6, pp. 786–798, 2006. View at Google Scholar
  62. G. R. Swennen, M. Y. Mommaerts, J. Abeloos et al., “A cone-beam CT based technique to augment the 3D virtual skull model with a detailed dental surface,” Int J Oral Maxillofac Surg., vol. 38, no. 1, pp. 48–57, 2009. View at Google Scholar
  63. N. Nadjmi, W. Mollemans, A. Daelemans, G. Van Hemelen, F. Schutyser, and S. Bergé, “Virtual occlusion in planning orthognathic surgical procedures,” Int J Oral Maxillofac Surg., vol. 39, no. 5, pp. 457–462, 2010. View at Google Scholar
  64. S. A. Schendel and R. Jacobson, “Three-dimensional imaging and computer simulation for office-based surgery,” J Oral Maxillofac Surg., vol. 67, no. 10, pp. 2107–2114, 2009. View at Google Scholar
  65. A. Westermark, S. Zachow, and B. L. Eppley, “Three-dimensional osteotomy planning in maxillofacial surgery including soft tissue prediction,” J Craniofac Surg., vol. 16, no. 1, pp. 100–104, 2005. View at Google Scholar
  66. J. Xia, H. H. Ip, N. Samman et al., “Three-dimensional virtual-reality surgical planning and soft-tissue prediction for orthognathic surgery,” IEEE Trans Inf Technol Biome., vol. 5, no. 2, pp. 97–107, 2001. View at Google Scholar
  67. C. Marchetti, A. Bianchi, M. Bassi, R. Gori, C. Lamberti, and A. Sarti, “Mathematical modeling and numerical simulation in maxillo-facial virtual surgery (VISU),” J Craniofac Surg., vol. 17, no. 4, pp. 661–667, 2006, discussion 668. View at Google Scholar
  68. Y. B. Chang, J. J. Xia, J. Gateno, Z. Xiong, X. Zhou, and S. T. Wong, “An automatic and robust algorithm of reestablishment of digital dental occlusion,” IEEE Trans Med Imaging., vol. 29, no. 9, pp. 1652–1663, 2010. View at Google Scholar
  69. J. J. Fang and T. H. Kuo, “Modelling of mandibular movement,” Comput Biol Med., vol. 38, no. 11-12, pp. 1152–1162, 2008. View at Google Scholar
  70. R. Olszewski, M. B. Villamil, D. G. Trevisan et al., “Towards an integrated system for planning and assisting maxillofacial orthognathic surgery,” Comput Methods Programs Biomed., vol. 91, no. 1, pp. 13–21, 2008. View at Google Scholar
  71. E. De Momi, J. Chapuis, I. Pappas et al., “Automatic extraction of the mid-facial plane for cranio-maxillofacial surgery planning,” Int J Oral Maxillofac Surg., vol. 35, no. 7, pp. 636–642, 2006. View at Google Scholar
  72. G. Danesh, C. Lippold, U. Joos, and U. Meyer, “Technical and clinical assessment of the use of a new material-based splint in orthognathic surgery,” Int J Oral Maxillofac Surg., vol. 35, no. 9, pp. 796–799, 2006. View at Google Scholar
  73. G. Santler, “3-D COSMOS: a new 3-D model based computerised operation simulation and navigation system,” J Craniomaxillofac Surg., vol. 28, no. 5, pp. 287–293, 2000. View at Google Scholar
  74. A. Reychler, “Notions d’orthopédie dento-maxillo-faciale,” in Traité depathologies buccale et maxillo-faciale, E. Piette and H. Reychler, Eds., pp. 1639–1724, De Boeck, Belgium, 1990. View at Google Scholar
  75. C. H. Tweed, Clinical orthodontics, Mosby, Saint Louis, 1960.
  76. V. Sassouni and A. Forrest, Orthodontics in dental practice, Mosby, Saint Louis, 1971.
  77. H. P. Bimler, “Bimler therapy. Part 1. Bimler cephalometric analysis,” J Clin Orthod., vol. 19, no. 7, pp. 501–523, 1985. View at Google Scholar
  78. C. Lippold, G. Danesh, U. Meyer, A. Hohoff, M. Kelker, and J. Kleinheinz, “Potential and limitations of cephalometric analysis of maxillofacial bone movement in the case of LeFort III-distraction,” J Orofac Orthop., vol. 66, no. 5, pp. 388–396, 2005. View at Google Scholar
  79. C. J. Burstone, R. R. James, H. Legan, G. A. Murphy, and L. A. Norton, “Cephalometrics for orthognathic surgery,” J Oral Surg., vol. 36, no. 4, pp. 269–276, 1978. View at Google Scholar
  80. J. Delaire, “L'analyse architecturale et structurale cranio-faciale (de profil). Principes théoriques. Quelques exemples d'emploi en chirurgie maxillo-faciale,” Rev Stomatol., vol. 79, no. 1, pp. 1–33, 1978. View at Google Scholar
  81. D. H. Enlow, Handbook of facial growth, Saunders, Philadelphia, 1975.
  82. M. Tsuji, N. Nogushi, M. Shigematsu et al., “A new navigation system based on cephalograms and dental casts for oral and maxillofacial surgery,” Int J Oral Maxillofac Surg., vol. 35, no. 9, pp. 828–836, 2006. View at Google Scholar
  83. R. Olszewski, G. Cosnard, B. Macq, P. Mahy, and H. Reychler, “CT based cephalometric analysis: 3D cephalometric theoretical concept and software,” Neuroradiology, vol. 48, no. 11, pp. 853–862, 2006. View at Google Scholar
  84. G. Bettega, Y. Payan, B. Mollard, A. Boyer, B. Raphael, and S. Lavallee, “Asimulator for maxillofacial surgery integrating 3D cephalometry and orthodontia,” Comput Aided Surg., vol. 5, no. 3, pp. 156–165, 2000. View at Google Scholar
  85. R. Olszewski, K. Tran Duy, B. Raucent, H. Reychler, and V. Nicolas, “Method and equipment for the simulation of the operation of maxillofacial surgery and transfer of this planning to the operating room,” EU Patent n°2705051.
  86. J. Treil, J. Casteigt, P. Borianne, C. Madrid, M. Jaeger, and P. de Bonnecaze, “L'équilibre architectural de la face: un concept céphalométrique 3D,” Rev Stomatol Chir Maxillofac., vol. 100, no. 3, pp. 111–122, 1999. View at Google Scholar
  87. J. Gateno, J. F. Teichgraeben, and J. Xia, “Method and apparatus for fabricating orthognathic surgical splints,” Patent application publication US 2003/0065259 A1.
  88. B. Wong, “Adjustable occlusal plane table and method of use for orthognathic set-ups,” US Patent n°4624639.
  89. M. Glatt, “Accessory device for a dental articulator and method for use in fabrication of dental prosthetics,” US patent n° 5795152.
  90. R. C. Staples, “Orthognathic surgery simulation instrument,” US patent n° 6102698.
  91. D. Wiechmann, U. Ehmer, U. Joos, and K. Dorr-Neudeck, “Le procédé de double socle calibré préfabriqué - KDMMS pour simulation et planification tridimensionnelle dans l’articulateur en chirurgie orthognathique,” Rev Stomatol Chir Maxillofac., vol. 98, no. 2, pp. 91–95, 1997. View at Google Scholar
  92. T. Theodossy and M. A. Bamber, “Model surgery with passive robot arm for orthognathic surgery planning,” J Oral Maxillofac Surg., vol. 61, no. 11, pp. 1310–1317, 2003. View at Google Scholar
  93. H. Hibi, Y. Sawaki, and M. Ueda, “Three-dimensional model simulation in orthognathic surgery,” Int J Adult Orthodon Orthognath Surg., vol. 12, no. 3, pp. 226–232, 1997. View at Google Scholar
  94. S. Hassfeld and J. Mühling, “Computer assisted oral and maxillofacial surgery - a review and an assessment of technology,” Int J Oral Maxillofac Surg., vol. 30, no. 1, pp. 2–13, 2001. View at Google Scholar
  95. M. J. Troulis, P. Everett, E. B. Seldin, R. Kikinis, and L. B. Kaban, “Development of a three-dimensional treatment planning system based on computed tomographic data,” Int J Oral Maxillofac Surg., vol. 31, no. 4, pp. 349–357, 2002. View at Google Scholar
  96. P. Neumann, D. Siebert, G. Faulkner et al., “Virtual 3D cutting for bone segment extraction in maxillofacial surgery planning,” Stud Health Technol Inform., vol. 62, pp. 235–241, 1999. View at Google Scholar
  97. J. Xia, D. Wang, N. Samman, R. W. K. Yeung, and H. Tideman, “Computer-assisted three dimensional surgical planning and simulation: 3D colour facial model generation,” Int J Oral Maxillofac Surg., vol. 29, no. 4, pp. 2–10, 2000. View at Google Scholar
  98. J. Xia, H. S. Ip, N. Samman et al., “Computer-assisted three-dimensional surgical planning and simulation: 3D virtual osteotomy,” Int J Oral Maxillofac Surg., vol. 29, no. 4, pp. 11–17, 2000. View at Google Scholar
  99. C. H. Kau, A. J. Cronin, and S. Richmond, “A three-dimensional evaluation of postoperative swelling following orthognathic surgery at 6 months,” Plast Reconstr Surg., vol. 119, no. 7, pp. 2192–2199, 2007. View at Google Scholar
  100. M. Soncul and M. A. Bamber, “Evaluation of facial soft tissue changes with optical surface scan after surgical correction of Class III deformities,” J Oral Maxillofac Surg., vol. 62, no. 11, pp. 1331–1340, 2004. View at Google Scholar
  101. C. J. Day and T. Robert, “Three-dimensional assessment of the facial soft tissue changes that occur postoperatively in orthognathic patients,” World J Orthod., vol. 7, no. 1, pp. 15–26, 2006. View at Google Scholar
  102. J. A. Harrison, M. A. Nixon, W. R. Fright, and L. Snape, “Use of hand-held laser scanning in the assessment of facial swelling: a preliminary study,” Br J Oral Maxillofac Surg., vol. 42, no. 1, pp. 8–17, 2004. View at Google Scholar
  103. G. R. J. Swennen, E. L. Barth, C. Eulzer, and F. Schutyzer, “The use of a new 3D splint and double CT scan procedure to obtain an accurate anatomic virtual augmented model of the skull,” Int J Oral Maxillofac Surg., vol. 36, no. 2, pp. 146–152, 2007. View at Google Scholar
  104. S. Hassfeld, J. Mühling, and J. Zoller, “Intraoperative navigation in oral and maxillofacial surgery,” Int J Oral Maxillofac Surg., vol. 24, no. 1 Pt2, pp. 111–119, 1995. View at Google Scholar
  105. R. Marmulla, T. Lüth, J. Mühling, and S. Hassfeld, “Automated laser registration in image-guided surgery: evaluation of the correlation between laser scan resolution and navigation accuracy,” Int J Oral Maxillofac Surg., vol. 33, no. 7, pp. 642–648, 2004. View at Google Scholar
  106. A. Wagner, O. Ploder, G. Ensilidis, M. Truppe, and R. Ewers, “Image-guided surgery,” Int J Oral Maxillofac Surg., vol. 25, no. 2, pp. 147–151, 1996. View at Google Scholar
  107. R. Marmulla and H. Niederdellmann, “Contrôle de la précision de la position des segments osseux pendant a navigation chirurgicale,” Rev Stomatol Chir Maxillofac., vol. 99, no. 4, pp. 184–187, 1998. View at Google Scholar
  108. J. H. Shuhaiber, “Augmented reality in surgery,” Arch Surg., vol. 139, no. 2, pp. 170–174, 2004. View at Google Scholar
  109. K. Cleary and C. Nguyen, “State of art in surgical robotics: clinical application and technology challenges,” Comput Aided Surg., vol. 6, no. 6, pp. 312–328, 2001. View at Google Scholar
  110. W. Korb, R. Marmulla, J. Raczkowsky, J. Mühling, and S. Hassfeld, “Robots in the operating theatre - chances and challenges,” Int J Oral Maxillofac Surg., vol. 33, no. 8, pp. 721–732, 2004. View at Google Scholar
  111. T. Fortin, J. L. Bosson, M. Isidori, and E. Blanchet, “Effect of flapless surgery on pain experienced in implant placement using an image-guided system,” Int J Oral Maxillofac Implants., vol. 21, no. 2, pp. 298–304, 2006. View at Google Scholar
  112. K. Verstreken, J. Van Cleynenbreugel, G. Marchal, I. Naert, P. Suetens, and D. van Steenberghe, “Computer-assisted planning of oral implant surgery: a three-dimensional approach,” Int J Oral Maxillofac Implants., vol. 11, no. 6, pp. 806–808, 1996. View at Google Scholar
  113. S. D. Ganz, “Presurgical planning with CT-derived fabrication of surgical guides,” J Oral Maxillofac Surg., vol. 63, no. 9 Suppl2, pp. 59–71, 2005. View at Google Scholar
  114. S. M. Parel and R. G. Triplett, “Interactive imaging for implant planning placemcent, and prosthetic construction,” J Oral Maxillofac Surg., vol. 62, no. 9 Suppl2, pp. 41–47, 2004. View at Google Scholar
  115. A. Rocci, M. Martignoni, and J. Gottlow, “Immediate loading in the maxilla using flapless surgery, implants placed in predetermined positions, and prefabricated provisional restorations: a retrospective 3-year clinical study,” Clin Implant Dent Relat Res., vol. 5, Suppl1, pp. 29–36, 2003. View at Google Scholar
  116. L. Spector, “Computer-aided dental implant planning,” Dent Clin North Am., vol. 52, no. 4, pp. 761–775, 2008. View at Google Scholar
  117. W. Engleke and M. Capobianco, “Flapless sinus floor augmentation using endoscopy combined with CT scan-designed surgical templates: method and report of 6 consecutive cases,” Int J Oral Maxillofac Implants., vol. 20, no. 6, pp. 891–897, 2005. View at Google Scholar
  118. T. Chiarelli, E. Lamma, and T. Sansoni, “A fully 3D work context for oral implant planning and simulation,” Int J Comput Assist Radiol Surg., vol. 5, no. 1, pp. 57–67, 2010. View at Google Scholar
  119. C. BouSerhal, R. Jacobs, M. Quirynen, and D. van Steenberghe, “Imaging technique selection for the preoperative planning of oral implants: a review of the literature,” Clin Implant Dent Relat Res., vol. 4, no. 3, pp. 156–172, 2002, Review. View at Google Scholar
  120. K. Ito, Y. Gomi, S. Sato, Y. Arai, and K. Shinoda, “Clinical application of a new compact CT system to assess 3D images for the preoperative treatment planning of implants in the posterior mandible. A case report,” Clin Oral Implants Res., vol. 12, no. 5, pp. 539–542, 2001. View at Google Scholar
  121. P. B. Tardieu, L. Vrielinck, and E. Escolano, “Computer-assisted implant placement. A case report: treatement of the mandible,” Int J Oral Maxillofac Implants., vol. 18, no. 4, pp. 599–604, 2003. View at Google Scholar
  122. S. Yeh, E. A. Monaco, and R. J. Buhite, “Using transitional implants as fixation screws to stabilize a surgical template for accurate implant placement: a clinical report,” J Prosthet Dent., vol. 93, no. 6, pp. 509–513, 2005. View at Google Scholar
  123. A. Gaggl, G. Schultes, G. Santler, and H. Karcher, “Treatment planning for sinus lift augmentations through use of 3-dimensional milled models derived from computed tomography scans: a report of 3 cases,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 86, no. 4, pp. 388–392, 1998. View at Google Scholar
  124. H. Reychler and R. Olszewski, “Intracerebral penetration of a zygomatic dental implant and consequent therapeutic dilemmas: case report,” Int J Oral Maxillofac Implants., vol. 25, no. 2, pp. 416–418, 2010. View at Google Scholar
  125. L. Vrielinck, C. Politis, S. Schepers, M. Pauwels, and I. Naert, “Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study,” Int J Oral Maxillofac Surg., vol. 32, no. 1, pp. 7–14, 2003. View at Google Scholar
  126. M. Rubio Serrano, S. Albalat Estela, M. Peñarrocha Diago, and M. Peñarrocha Diago, “Software applied to oral implantology: update,” Med Oral Patol Oral Cir Bucal., vol. 13, no. 10, pp. E661–E665, 2008, Review. View at Google Scholar
  127. P. Dérand and J. M. Hirsch, “Virtual bending of mandibular reconstruction plates using a computer-aided design,” J Oral Maxillofac Surg., vol. 67, no. 8, pp. 1640–1643, 2009. View at Google Scholar
  128. L. B. Zhou, H. T. Shang, L. S. He et al., “Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique: a preliminary clinical study,” J Oral Maxillofac Surg., vol. 68, no. 9, pp. 2115–2121, 2010. View at Google Scholar
  129. C. Toro, M. Robiony, F. Costa, N. Zerman, and M. Politi, “Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction,” Head Face Med., vol. 15, no. 3, 5, 2007. View at Google Scholar
  130. G. Santler, H. Kärcher, and C. Ruda, “Indications and limitations of three-dimensional models in cranio-maxillofacial surgery,” J Craniomaxillofac Surg., vol. 26, no. 1, pp. 11–16, 1998. View at Google Scholar
  131. L. K. Cheung, M. C. Wong, and L. L. Wong, “Refinement of facial reconstructive surgery by stereo-model planning,” Ann R Australas Coll Dent Surg., vol. 16, pp. 129–132, 2002. View at Google Scholar
  132. J. Y. Choi, J. H. Choi, N. K. Kim et al., “Analysis of errors in medical rapid prototyping models,” Int J Oral Maxillofac Surg., vol. 31, no. 1, pp. 23–32, 2002. View at Google Scholar
  133. M. Robiony, I. Salvo, F. Costa et al., “Accuracy of virtual reality and stereolithographic models in maxillo-facial surgical planning,” J Craniofac Surg., vol. 19, no. 2, pp. 482–489, 2008. View at Google Scholar
  134. L. K. Chow and L. K. Cheung, “The usefulness of stereomodels in maxillofacial surgical management,” J Oral Maxillofac Surg., vol. 65, no. 11, pp. 2260–2268, 2007. View at Google Scholar
  135. D. P. Sinn, J. E. Cillo Jr., and B. A. Miles, “Stereolithography for craniofacial surgery,” J Craniofac Surg., vol. 17, no. 5, pp. 869–875, 2006, Review. View at Google Scholar
  136. F. Toso, C. Zuiani, M. Vergendo et al., “Usefulness of computed tomography in pre-surgical evaluation of maxillo-facial pathology with rapid prototyping and surgical pre-planning by virtual reality,” Radiol Med., vol. 110, no. 5-6, pp. 665–675, 2005. View at Google Scholar
  137. D. N. Silva, M. Gerhardt de Oliveira, E. Meurer, M. I. Meurer, J. V. Lopes da Silva, and A. Santa-Bárbara, “Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction,” J Craniomaxillofac Surg., vol. 36, no. 8, pp. 443–449, 2008. View at Google Scholar
  138. E. Berry, J. M. Brown, M. Connell et al., “Preliminary experience with medical applications of rapid prototyping by selective laser sintering,” Med Eng Phys., vol. 19, no. 1, pp. 90–96, 1997. View at Google Scholar
  139. D. Ibrahim, T. L. Broilo, C. Heitz et al., “Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy,” J Craniomaxillofac Surg., vol. 37, no. 3, pp. 167–173, 2009. View at Google Scholar
  140. J. Winder and R. Bibb, “Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery,” J Oral Maxillofac Surg., vol. 63, no. 7, pp. 1006–1015, 2005. View at Google Scholar
  141. A. Cohen, A. Laviv, P. Berman, R. Nashef, and J. Abu-Tair, “Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 108, no. 5, pp. 661–666, 2009. View at Google Scholar
  142. K. Schicho, M. Figl, R. Seemann et al., “Accuracy of treatment planning based on stereolithography in computer assisted surgery,” Med Phys., vol. 33, no. 9, pp. 3408–3459, 2006. View at Google Scholar
  143. J. S. Bill and J. F. Reuther, “Rapid prototyping in planning reconstructive surgery of the head and neck. Review and evaluation of indications in clinical use,” Mund Kiefer Gesichtschir., vol. 8, no. 3, pp. 135–153, 2004. View at Google Scholar
  144. C. C. Lin, L. J. Lo, M. Y. Lee, H. F. Wong, and Y. R. Chen, “Craniofacial surgical simulation: application of three-dimensional medical imaging and rapid prototyping models,” Chang Gung Med J., vol. 24, no. 4, pp. 229–238, 2001. View at Google Scholar
  145. O. Lieger, R. Richards, M. Liu, and T. Lloyd, “Computer-assisted design and manufacture of implants in the late reconstruction of extensive orbital fractures,” Arch Facial Plast Surg., vol. 12, no. 3, pp. 186–191, 2010. View at Google Scholar
  146. J. V. Williams and P. J. Revington, “Novel use of an aerospace selective laser sintering machine for rapid prototyping of an orbital blowout fracture,” Int J Oral Maxillofac Surg., vol. 39, no. 2, pp. 182–184, 2010. View at Google Scholar
  147. M. Kozakiewicz, M. Elgalal, P. Loba et al., “Clinical application of 3D pre-bent titanium implants for orbital floor fractures,” J Craniomaxillofac Surg., vol. 37, no. 4, pp. 229–234, 2009. View at Google Scholar
  148. E. K. Sannomiya, S. A. Reis, J. Asaumi, J. V. Silva, A. S. Barbara, and K. Kishi, “Clinical and radiographic presentation and preparation of the prototyping model for pre-surgical planning in Apert's syndrome,” Dentomaxillofac Radiol., vol. 35, no. 2, pp. 119–124, 2006. View at Google Scholar
  149. J. Asaumi, N. Kawai, Y. Honda, H. Shigehara, T. Wakasa, and K. Kishi, “Comparison of three-dimensional computed tomography with rapid prototype models in the management of coronoid hyperplasia,” Dentomaxillofac Radiol., vol. 30, no. 6, pp. 330–335, 2001. View at Google Scholar
  150. S. Bai, B. Bo, Y. Bi et al., “CAD/CAM surface templates as an alternative to the intermediate wafer in orthognathic surgery,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 110, no. 5, pp. e1–e7, 2010. View at Google Scholar
  151. M. E. Mavili, H. I. Canter, B. Saglam-Aydinatay, S. Kamaci, and I. Kocadereli, “Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery,” J Craniofac Surg., vol. 18, no. 4, pp. 740–747, 2007. View at Google Scholar
  152. T. Y. Wong, J. J. Fang, C. H. Chung, J. S. Huang, and J. W. Lee, “Comparison of 2 methods of making surgical models for correction of facial asymmetry,” J Oral Maxillofac Surg., vol. 63, no. 2, pp. 200–208, 2005. View at Google Scholar
  153. X. Y. Chen, S. L. Chen, X. Zhang, J. P. Li, and W. Deng, “Accuracy of intraoral vertical ramus osteotomy with a stereolithographic template,” Ann Plast Surg., vol. 66, no. 1, pp. 88–91, 2011. View at Google Scholar
  154. S. Nikzad, A. Azari, and A. Ghassemzadeh, “Modified flapless dental implant surgery for planning treatment in a maxilla including sinus lift augmentation through use of virtual surgical planning and a 3-dimensional model,” J Oral Maxillofac Surg., vol. 68, no. 9, pp. 2291–2298, 2010. View at Google Scholar
  155. M. Robiony, “Distraction osteogenesis: a method to improve facial balance in asymmetric patients,” J Craniofac Surg., vol. 21, no. 2, pp. 508–512, 2010. View at Google Scholar
  156. A. Varol and S. Basa, “The role of computer-aided 3D surgery and stereolithographic modelling for vector orientation in premaxillary and trans-sinusoidal maxillary distraction osteogenesis,” Int J Med Robot., vol. 5, no. 2, pp. 198–206, 200. View at Google Scholar
  157. E. K. Sannomiya, J. V. Silva, A. A. Brito, D. M. Saez, F. Angelieri, and S. Dalben Gda, “Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodel,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 106, no. 1, pp. e36–e40, 2008. View at Google Scholar
  158. R. W. Yeung, N. Samman, L. K. Cheung, C. Zhang, and R. L. Chow, “Stereomodel-assisted fibula flap harvest and mandibular reconstruction,” J Oral Maxillofac Surg., vol. 65, no. 6, pp. 1128–1134, 2007. View at Google Scholar
  159. S. Singare, L. Dichen, L. Bingheng, L. Yanpu, G. Zhenyu, and L. Yaxiong, “Design and fabrication of custom mandible titanium tray based on rapid prototyping,” Med Eng Phys., vol. 26, no. 8, pp. 671–676, 2004. View at Google Scholar
  160. S. M. Roser, S. Ramachandra, H. Blair et al., “The accuracy of virtual surgical planning in free fibula mandibular reconstruction: comparison of planned and final results,” J Oral Maxillofac Surg., vol. 68, no. 11, pp. 2824–2832, 2010. View at Google Scholar
  161. Y. He, H. G. Zhu, Z. Y. Zhang, J. He, and R. Sader, “Oral Three-dimensional model simulation and reconstruction of composite total maxillectomy defects with fibula osteomyocutaneous flap flow-through from radial forearm flap,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 108, no. 6, pp. e6–e12, 2009. View at Google Scholar
  162. T. Wu, M. Engelhardt, L. Fieten, A. Popovic, and K. Radermacher, “Anatomically constrained deformation for design of cranial implant: methodology and validation,” Med Image Comput Comput Assist Interv., vol. 9, Pt 1, pp. 9–16, 2006. View at Google Scholar
  163. C. Agner, M. Dujovny, and H. Park, “Delayed minimally invasive cranioplasty,” Minim Invasive Neurosurg., vol. 46, no. 3, pp. 186–190, 2003. View at Google Scholar
  164. B. Fallahi, M. Foroutan, S. Motavalli, M. Dujovny, and S. Limaye, “Computer-aided manufacturing of implants for the repair of large cranial defects: an improvement of the stereolithography technique,” Neurol Res., vol. 21, no. 3, pp. 281–286, 1999. View at Google Scholar
  165. E. Maravelakis, K. David, A. Antoniadis, A. Manios, N. Bilalis, and Y. Papaharilaou, “Reverse engineering techniques for cranioplasty: a case study,” J Med Eng Technol., vol. 32, no. 2, pp. 115–121, 2008. View at Google Scholar
  166. L. Chiarini, S. Figurelli, G. Pollastri et al., “Cranioplasty using acrylic material: a new technical procedure,” J Craniomaxillofac Surg., vol. 32, no. 1, pp. 5–9, 2004. View at Google Scholar
  167. H. Miyake, T. Ohta, and H. Tanaka, “A new technique for cranioplasty with L-shaped titanium plates and combination ceramic implants composed of hydroxyapatite and tricalcium phosphate (Ceratite),” Neurosurgery, vol. 46, no. 2, pp. 414–418, 2000. View at Google Scholar
  168. K. Ekstrand and J. M. Hirsch, “Malignant tumors of the maxilla: virtual planning and real-time rehabilitation with custom-made R-zygoma fixtures and carbon-graphite fiber-reinforced polymer prosthesis,” Clin Implant Dent Relat Res., vol. 10, no. 1, pp. 23–29, 2008. View at Google Scholar
  169. L. Ciocca, F. De Crescenzio, M. Fantini, and R. Scotti, “Rehabilitation of the nose using CAD/CAM and rapid prototyping technology after ablative surgery of squamous cell carcinoma: a pilot clinical report,” Int J Oral Maxillofac Implants., vol. 25, no. 4, pp. 808–812, 2010. View at Google Scholar
  170. S. Zhang, X. Liu, Y. Xu et al., “Application of rapid prototyping for temporomandibular joint reconstruction,” J Oral Maxillofac Surg., vol. 69, no. 2, pp. 432–438, 2011. View at Google Scholar
  171. P. Feiyun, L. Wei, C. Jun, X. Xin, S. Zhuojin, and Y. Fengguo, “Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models,” J Oral Maxillofac Surg., vol. 68, no. 3, pp. 571–577, 2010. View at Google Scholar
  172. K. Nagy and M. Y. Mommaerts, “Advanced s(t)imulator for cleft palate repair techniques,” Cleft Palate Craniofac J., vol. 46, no. 1, pp. 1–5, 2009. View at Google Scholar
  173. M. Kobayashi, T. Nakajima, A. Mori, D. Tanaka, T. Fujino, and H. Chiyokura, “Three-dimensional computer graphics for surgical procedure learning: Web three-dimensional application for cleft lip repair,” Cleft Palate Craniofac J., vol. 43, no. 3, pp. 266–271, 2006. View at Google Scholar
  174. C. P. Leser and S. A. Jepsen, “A mandibular surgical training model,” Gen Dent., vol. 56, no. 2, pp. 149–154, 2008. View at Google Scholar
  175. J. T. Lambrecht, D. Berndt, A. M. Christensen, and M. Zehnder, “Haptic model fabrication for undergraduate and postgraduate teaching,” Int J Oral Maxillofac Surg., vol. 39, no. 12, pp. 1226–1229, 2010. View at Google Scholar
  176. J. Y. Choi, K. G. Song, and S. H. Baek, “Virtual model surgery and wafer fabrication for orthognathic surgery,” Int J Oral Maxillofac Surg., vol. 38, no. 12, pp. 1306–1310, 2009. View at Google Scholar
  177. J. Gateno, J. J. Xia, J. F. Teichgraeber et al., “Clinical feasibility of computer-aided surgical simulation (CASS) in the treatment of complex cranio-maxillofacial deformities,” J Oral Maxillofac Surg., vol. 65, no. 4, pp. 728–734, 2007. View at Google Scholar
  178. M. C. Metzger, B. Hohlweg-Majert, U. Schwarz, M. Teschner, B. Hammer, and R. Schmelzeisen, “Manufacturing splints for orthognathic surgery using a three-dimensional printer,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 105, no. 2, pp. e1–e7, 2008. View at Google Scholar
  179. R. Olszewski, K. Tranduy, and H. Reychler, “Innovative procedure for computer-assisted genioplasty: threedimensional cephalometry, rapid-prototyping model and surgical splint,” Int J Oral Maxillofac Surg., vol. 39, no. 7, pp. 721–724, 2010. View at Google Scholar
  180. T. Clijmans, M. Mommaerts, F. Gelaude, P. Suetens, and J. V. Sloten, “Skull reconstruction planning transfer to the operation room by thin metallic templates: clinical results,” J Craniomaxillofac Surg., vol. 36, no. 2, pp. 66–74, 2008. View at Google Scholar
  181. X. J. Liu, L. Gui, C. Mao, X. Peng, and G. Y. Yu, “Applying computer techniques in maxillofacial reconstruction using a fibula flap: a messenger and an evaluation method,” J Craniofac Surg., vol. 20, no. 2, pp. 372–377, 2009. View at Google Scholar
  182. C. Leiggener, E. Messo, A. Thor, H. F. Zeilhofer, and J. M. Hirsch, “A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps,” Int J Oral Maxillofac Surg., vol. 38, no. 2, pp. 187–192, 2009. View at Google Scholar
  183. T. Fortin, J. L. Bosson, J. L. Coudert, and M. Isidori, “Reliability of preoperative planning of an image-guided system for oral implant placement based on 3-dimensional images: an in vivo study,” Int J Oral Maxillofac Implants., vol. 18, no. 6, pp. 886–893, 2003. View at Google Scholar
  184. D. P. Sarment, P. Sukovic, and N. Clinthorne, “Accuracy of implant placement with a stereolithographic surgical guide,” Int J Oral Maxillofac Implants., vol. 18, no. 4, pp. 571–577, 2003. View at Google Scholar
  185. V. Arisan, Z. C. Karabuda, and T. Ozdemir, “Accuracy of two stereolithographic guide systems for computeraided implant placement: a computed tomography-based clinical comparative study,” J Periodontol., vol. 81, no. 1, pp. 43–51, 2010. View at Google Scholar
  186. G. Sammartino, A. Della Valle, G. Marenzi et al., “Stereolithography in oral implantology: a comparison of surgical guides,” Implant Dent., vol. 13, no. 2, pp. 133–139, 2004. View at Google Scholar
  187. E. Teubner, D. Rohner, A. Deak, A. Lorenzon, and C. P. Marinello, “Navigated implant placement using a bone supported CT-guided surgical template. Case report,” Schweiz Monatsschr Zahnmed., vol. 119, no. 12, pp. 1211–1234, 2009. View at Google Scholar
  188. S. J. Jayme, V. A. Muglia, R. R. de Oliveira, and A. B. Novaes, “Optimization in multi-implant placement for immediate loading in edentulous arches using a modified surgical template and prototyping: a case report,” Int J Oral Maxillofac Implants., vol. 23, no. 4, pp. 759–762, 2008. View at Google Scholar
  189. V. Arisan, C. Z. Karabuda, and T. Ozdemir, “Implant surgery using bone- and mucosa-supported stereolithographic guides in totally edentulous jaws: surgical and post-operative outcomes of computer-aided vs. standard techniques,” Clin Oral Implants Res., vol. 21, no. 9, pp. 980–988, 2010. View at Google Scholar
  190. T. Sohmura, N. Kusumoto, T. Otani, S. Yamada, K. Wakabayashi, and H. Yatani, “CAD/CAM fabrication and clinical application of surgical template and bone model in oral implant surgery,” Clin Oral Implants Res., vol. 20, no. 1, pp. 87–93, 2009. View at Google Scholar
  191. H. J. Nickenig, M. Wichmann, J. Hamel, K. A. Schlegel, and S. Eitner, “Evaluation of the difference in accuracy between implant placement by virtual planning data and surgical guide templates versus the conventional free-hand method - a combined in vivo - in vitro technique using cone-beam CT (Part II),” J Craniomaxillofac Surg., vol. 38, no. 7, pp. 488–493, 2010. View at Google Scholar
  192. X. Chen, J. Yuan, C. Wang, Y. Huang, and L. Kang, “Modular preoperative planning software for computeraided oral implantology and the application of a novel stereolithographic template: a pilot study,” Clin Implant Dent Relat Res., vol. 12, no. 3, pp. 181–193, 2010. View at Google Scholar
  193. D. van Steenberghe, R. Glauser, U. Blombäck et al., “A computed tomographic scan-derived customized surgical template and fixed prosthesis for flapless surgery and immediate loading of implants in fully edentulous maxillae: a prospective multicenter study,” Clin Implant Dent Relat Res., vol. 7, Suppl 1, pp. S111–S120, 2005. View at Google Scholar
  194. L. T. Yong and P. K. Moy, “Complications of computer-aided-design/computer-aided-machining-guided (NobelGuide) surgical implant placement: an evaluation of early clinical results,” Clin Implant Dent Relat Res., vol. 10, no. 3, pp. 123–127, 2008. View at Google Scholar
  195. D. De Santis, L. C. Canton, A. Cucchi, G. Zanotti, E. Pistoia, and P. F. Nocini, “Computer-assisted surgery in the lower jaw: double surgical guide for immediately loaded implants in postextractive sites-technical notes and a case report,” J Oral Implantol., vol. 36, no. 1, pp. 61–68, 2010. View at Google Scholar
  196. G. A. Mandelaris and A. L. Rosenfeld, “Alternative applications of guided surgery: precise outlining of the lateral window in antral sinus bone grafting,” J Oral Maxillofac Surg., vol. 67, 11 Suppl, pp. 23–30, 2009. View at Google Scholar
  197. T. Fortin, M. Isidori, and H. Bouchet, “Placement of posterior maxillary implants in partially edentulous patients with severe bone deficiency using CAD/CAM guidance to avoid sinus grafting: a clinical report of procedure,” Int J Oral Maxillofac Implants., vol. 24, no. 1, pp. 96–102, 2009. View at Google Scholar
  198. X. Zhang, S. L. Chen, J. M. Zhang, and J. L. Chen, “Fabrication of a surgical template for orbital implant placement: a case report,” Int J Oral Maxillofac Implants., vol. 25, no. 4, pp. 826–830, 2010. View at Google Scholar
  199. G. Widmann, R. Stoffner, and R. Bale, “Errors and error management in image-guided craniomaxillofacial surgery,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 107, no. 5, pp. 701–715, 2009, Review. View at Google Scholar
  200. M. Heiland, C. R. Habermann, and R. Schmelzle, “Indications and limitations of intraoperative navigation in maxillofacial surgery,” J Oral Maxillofac Surg., vol. 62, no. 9, pp. 1059–1063, 2004. View at Google Scholar
  201. J. Brief, D. Edinger, S. Hassfeld, and G. Eggers, “Accuracy of image-guided implantology,” Clin Oral Implants Res., vol. 16, no. 4, pp. 495–501, 2005. View at Google Scholar
  202. J. Hoffmann, C. Westendorff, M. Schneider, and S. Reinert, “Accuracy assessment of image-guided implant surgery: an experimental study,” Int J Oral Maxillofac Implants., vol. 20, no. 3, pp. 382–386, 2005. View at Google Scholar
  203. E. B. Strong, A. Rafii, B. Holhweg-Majert, S. C. Fuller, and M. C. Metzger, “Comparison of 3 optical navigation systems for computer-aided maxillofacial surgery,” Arch Otolaryngol Head Neck Surg., vol. 134, no. 10, pp. 1080–1084, 2008. View at Google Scholar
  204. A. Wagner, K. Schicho, W. Birkfellner et al., “Quantitative analysis of factors affecting intraoperative precision and stability of optoelectronic and electromagnetic tracking systems,” Med Phys., vol. 29, no. 5, pp. 905–912, 2002. View at Google Scholar
  205. J. M. Rosenow and W. K. Sootsman, “Application accuracy of an electromagnetic field-based image-guided navigation system,” Stereotact Funct Neurosurg., vol. 85, no. 2-3, pp. 75–81, 2007. View at Google Scholar
  206. N. C. Atuegwu and R. L. Galloway, “Volumetric characterization of the Aurora magnetic tracker system for image-guided transorbital endoscopic procedures,” Phys Med Biol., vol. 53, no. 16, pp. 4355–4368, 2008. View at Google Scholar
  207. D. Malthan, G. Ehrlich, J. Stallkamp, F. Dammann, E. Schwaderer, and M. M. Maassen, “Automated registration of partially defective surfaces by local landmark identification,” Comput Aided Surg., vol. 8, no. 6, pp. 300–309, 2003. View at Google Scholar
  208. G. Widmann, R. Stoffner, P. Schullian et al., “Comparison of the accuracy of invasive and noninvasive registration methods for image-guided oral implant surgery,” Int J Oral Maxillofac Implants., vol. 25, no. 3, pp. 491–498, 2010. View at Google Scholar
  209. H. T. Luebbers, P. Messmer, J. A. Obwegeser et al., “Comparison of different registration methods for surgical navigation in cranio-maxillofacial surgery,” J Craniomaxillofac Surg., vol. 36, no. 2, pp. 109–116, 2008. View at Google Scholar
  210. G. Eggers, J. Mühling, and R. Marmulla, “Image-to-patient registration techniques in head surgery,” Int J Oral Maxillofac Surg., vol. 35, no. 12, pp. 1081–1095, 2006, Review. View at Google Scholar
  211. J. D. Lee, C. H. Huang, S. T. Wang, C. W. Lin, and S. T. Lee, “Fast-MICP for frameless image-guided surgery,” Med Phys., vol. 37, no. 9, pp. 4551–4559, 2010. View at Google Scholar
  212. R. Ewers, K. Schicho, M. Truppe et al., “Computer-aided navigation in dental implantology: 7 years of clinical experience,” J Oral Maxillofac Surg., vol. 62, no. 3, pp. 329–334, 2004. View at Google Scholar
  213. A. D. Nijmeh, N. M. Goodger, D. Hawkes, P. J. Edwards, and M. McGurk, “Image-guided navigation in oral and maxillofacial surgery,” Br J Oral Maxillofac Surg., vol. 43, no. 4, pp. 294–302, 2005. View at Google Scholar
  214. M. Siessegger, B. T. Schneider, R. A. Mischkowski et al., “Use of imageguided navigation system in dental implant surgery in anatomically complex operation sites,” J Craniomaxillofac Surg., vol. 29, no. 5, pp. 276–281, 2001. View at Google Scholar
  215. F. Wanschitz, W. Birkfellner, F. Watzinger et al., “Evaluation of accuracy of computer-aided intraoperative positioning of endosseous oral implants in the edentulous mandible,” Clin Oral Implants Res., vol. 13, no. 1, pp. 59–64, 2002. View at Google Scholar
  216. A. Wagner, F. Wanschitz, W. Birkfellner et al., “Computer-aided placemcent of endosseous oral implants in patients after ablative tumour surgery: assessment of accuracy,” Clin Oral Implants Res., vol. 14, no. 3, pp. 340–348, 2003. View at Google Scholar
  217. Z. H. W. Beumer and L. Puscas, “Computer modeling and navigation in maxillofacial surgery,” Curr Opin Otolaryngol Head Neck Surg., vol. 17, no. 4, pp. 270–273, 2009, Review. View at Google Scholar
  218. O. M. Tepper, S. Sorice, G. N. Hershman, P. Saadeh, J. P. Levine, and D. Hirsch, “Use of virtual 3-dimensional surgery in post-traumatic craniomaxillofacial reconstruction,” J Oral Maxillofac Surg., vol. 69, no. 3, pp. 733–741, 2011. View at Google Scholar
  219. X. Chen, Y. Lin, C. Wang, G. Shen, S. Zhang, and X. Wang, “A surgical navigation system for oral and maxillofacial surgery and its application in the treatment of old zygomatic fractures,” Int J Med Robot., vol. 7, no. 1, pp. 42–50, 2011. View at Google Scholar
  220. A. Ogino, K. Onishi, and Y. Maruyama, “Intraoperative repositioning assessment using navigation system in zygomatic fracture,” J Craniofac Surg., vol. 20, no. 4, pp. 1061–1065, 2009. View at Google Scholar
  221. H. Yu, G. Shen, X. Wang, and S. Zhang, “Navigation-guided reduction and orbital floor reconstruction in the treatment of zygomatic-orbital-maxillary complex fractures,” J Oral Maxillofac Surg., vol. 68, no. 1, pp. 28–34, 2010. View at Google Scholar
  222. J. Collyer, “Stereotactic navigation in oral and maxillofacial surgery,” Br J Oral Maxillofac Surg., vol. 48, no. 2, pp. 79–83, 2010, Review. View at Google Scholar
  223. R. B. Bell and M. R. Markiewicz, “Computer-assisted planning, stereolithographic modeling, and intraoperative navigation for complex orbital reconstruction: a descriptive study in a preliminary cohort,” J Oral Maxillofac Surg., vol. 67, no. 12, pp. 2559–2570, 2009. View at Google Scholar
  224. X. Tao, F. Zhu, W. Chen, and S. Zhu, “The application of virtual endoscopy with computed tomography in maxillofacial surgery,” Chin Med J (Engl), vol. 116, no. 5, pp. 679–681, 2003. View at Google Scholar
  225. W. Z. Li, M. C. Zhang, S. P. Li, L. T. Zhang, and Y. Huang, “Application of computer-aided three-dimensional skull model with rapid prototyping technique in repair of zygomatico-orbito-maxillary complex fracture,” Int J Med Robot., vol. 5, no. 2, pp. 158–163, 2009. View at Google Scholar
  226. C. Klug, K. Schicho, O. Ploder et al., “Point-to-point computer-assisted navigation for precise transfer of planned zygoma osteotomies from the stereolithographic model into reality,” J Oral Maxillofac Surg., vol. 64, no. 3, pp. 550–559, 2006. View at Google Scholar
  227. A. M. Pham, A. A. Rafii, M. C. Metzger, A. Jamali, and E. B. Strong, “Computer modeling and intraoperative navigation in maxillofacial surgery,” Otolaryngol Head Neck Surg., vol. 137, no. 4, pp. 624–631, 2007. View at Google Scholar
  228. H. W. Beumer and L. Puscas, “Computer modeling and navigation in maxillofacial surgery,” Curr Opin Otolaryngol Head Neck Surg., vol. 17, no. 4, pp. 270–273, 2009, Review. View at Google Scholar
  229. A. Schramm, M. M. Suarez-Cunqueiro, M. Rücker et al., “Computer-assisted therapy in orbital and mid-facial reconstructions,” Int J Med Robot., vol. 5, no. 2, pp. 111–124, 2009, Review. View at Google Scholar
  230. A. Schramm, M. M. Suarez-Cunqueiro, E. L. Barth et al., “Computer-assisted navigation in craniomaxillofacial tumors,” J Craniofac Surg., vol. 19, no. 4, pp. 1067–1074, 2008. View at Google Scholar
  231. A. D. Nijmeh, N. M. Goodger, D. Hawkes, P. J. Edwards, and M. McGurk, “Image-guided navigation in oral and maxillofacial surgery,” Br J Oral Maxillofac Surg., vol. 43, no. 4, pp. 294–302, 2005, Review. View at Google Scholar
  232. R. Ewers, K. Schicho, G. Undt et al., “Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review,” Int J Oral Maxillofac Surg., vol. 34, no. 1, pp. 1–8, 2005, Review. View at Google Scholar
  233. R. B. Bell, “Computer planning and intraoperative navigation in cranio-maxillofacial surgery,” Oral Maxillofac Surg Clin North Am., vol. 22, no. 1, pp. 135–156, 2010, Review. View at Google Scholar
  234. N. Casap, A. Wexler, and R. Eliashar, “Computerized navigation for surgery of the lower jaw: comparison of 2 navigation systems,” J Oral Maxillofac Surg., vol. 66, no. 7, pp. 1467–1475, 2008. View at Google Scholar
  235. P. J. Voss, A. M. Leow, D. Schulze, M. C. Metzger, N. Liebehenschel, and R. Schmelzeisen, “Navigation-guided resection with immediate functional reconstruction for high-grade malignant parotid tumour at skull base,” Int J Oral Maxillofac Surg., vol. 38, no. 8, pp. 886–890, 2009. View at Google Scholar
  236. H. T. Lübbers, C. Jacobsen, D. Könü, F. Matthews, K. W. Grätz, and J. A. Obwegeser, “Surgical navigation in cranio-maxillofacial surgery: an evaluation on a child with a cranio-facio-orbital tumour,” Br J Oral Maxillofac Surg., vol. 49, no. 7, pp. 532–537, 2011. View at Google Scholar
  237. M. Feichtinger, R. M. Aigner, G. Santler, and H. Kärcher, “Case report: fusion of positron emission tomography (PET) and computed tomography (CT) images for image-guided endoscopic navigation in maxillofacial surgery: clinical application of a new technique,” J Craniomaxillofac Surg., vol. 35, no. 6-7, pp. 322–328, 2007. View at Google Scholar
  238. M. Feichtinger, M. Pau, W. Zemann, R. M. Aigner, and H. Kärcher, “Intraoperative control of resection margins in advanced head and neck cancer using a 3D-navigation system based on PET/CT image fusion,” J Craniomaxillofac Surg., vol. 38, no. 8, pp. 589–594, 2010. View at Google Scholar
  239. L. A. Reisner, B. W. King, M. D. Klein, G. W. Auner, and A. K. Pandya, “A prototype biosensor-integrated image-guided surgery system,” Int J Med Robot., vol. 3, pp. 82–88, 2007. View at Google Scholar
  240. N. Casap, E. Tarazi, A. Wexler, U. Sonnenfeld, and J. Lustmann, “Intraoperative computerized navigation for flapless implant surgery and immediate loading in the edentulous mandible,” Int J Oral Maxillofac Implants., vol. 20, no. 1, pp. 92–98, 2005. View at Google Scholar
  241. A. Gaggl and G. Schultes, “Assessment of accuracy of navigated implant placement in the maxilla,” Int J Oral Maxillofac Implants., vol. 17, no. 2, pp. 263–270, 2002. View at Google Scholar
  242. F. C. Ng, K. H. Ho, and A. Wexler, “Computer-assisted navigational surgery enhances safety in dental implantology,” Ann Acad Med Singapore, vol. 34, no. 5, pp. 383–388, 2005. View at Google Scholar
  243. P. Randelzhofer, J. M. de la Barrera, M. Spielberg, C. Kurtz, and J. R. Strub, “Three-dimensional navigation in oral implantology: a preliminary investigation,” Int J Periodontics Restorative Dent., vol. 21, no. 6, pp. 617–626, 2001. View at Google Scholar
  244. R. J. Miller and J. Bier, “Surgical navigation in oral implantology,” Implant Dent., vol. 15, no. 1, pp. 41–47, 2006. View at Google Scholar
  245. T. Fortin, M. Isidori, E. Blanchet, M. Perriat, H. Bouchet, and J. L. Coudert, “An image-guided system-drilled surgical template and trephine guide pin to make treatment of completely edentulous patients easier: a clinical report on immediate loading,” Clin Implant Dent Relat Res., vol. 6, no. 2, pp. 111–119, 2004. View at Google Scholar
  246. N. Casap, A. Wexler, and J. Lustmann, “Image-guided navigation system for placing dental implants,” Compend Contin Educ Dent., vol. 25, no. 10, pp. 783–784, 786, 788, 2004. View at Google Scholar
  247. A. Wexler, S. Tzadok, and N. Casap, “Computerized navigation surgery for the safe placement of palatal implants,” Am J Orthod Dentofacial Orthop., vol. 131, 4 Suppl, pp. S100–S105, 2007. View at Google Scholar
  248. S. N. Verma, S. R. Schow, B. H. Stone, and R. G. Triplett, “Applications of surgical navigational systems for craniofacial bone-anchored implant placement,” Int J Oral Maxillofac Implants., vol. 25, no. 3, pp. 582–588, 2010. View at Google Scholar
  249. C. Xiaojun, Y. Ming, L. Yanping, W. Yiqun, and W. Chengtao, “Image guided oral implantology and its application in the placement of zygoma implants,” Comput Methods Programs Biomed., vol. 93, no. 2, pp. 162–173, 2009. View at Google Scholar
  250. J. J. Xia, J. Gateno, and J. F. Teichgraeber, “A new paradigm for complex midface reconstruction: a reversed approach,” J Oral Maxillofac Surg., vol. 67, no. 3, pp. 693–703, 2009. View at Google Scholar
  251. S. Mazzoni, G. Badiali, L. Lancellotti, L. Babbi, A. Bianchi, and C. Marchetti, “Simulation-guided navigation: a new approach to improve intraoperative three-dimensional reproducibility during orthognathic surgery,” J Craniofac Surg., vol. 21, no. 6, pp. 1698–1705, 2010. View at Google Scholar
  252. A. Matsuo, M. Kono, J. Toyoda, T. Nakai, M. Tsuzuki, and H. Chiba, “Navigation surgery for Le Fort 1 osteotomy in a fibrous dysplasia patient,” Odontology, vol. 98, no. 2, pp. 181–184, 2010. View at Google Scholar
  253. H. B. Yu, G. F. Shen, S. L. Zhang, X. D. Wang, C. T. Wang, and Y. P. Lin, “Navigation-guided gap arthroplasty in the treatment of temporomandibular joint ankylosis,” Int J Oral Maxillofac Surg., vol. 38, no. 10, pp. 1030–1035, 2009. View at Google Scholar
  254. A. Wagner, G. Undt, F. Watzinger et al., “Principles of computer-assisted arthroscopy of the temporomandibular joint with optoelectronic tracking technology,” Oral Surg Oral Med Oral Pathol Oral Radiol Endod., vol. 92, no. 1, pp. 30–37, 2001. View at Google Scholar
  255. E. Belli, C. Matteini, G. C. D'Andrea, and N. Mazzone, “Navigator system guided endoscopic intraoral approach for remodelling of mandibular condyle in Garré syndrome,” J Craniofac Surg., vol. 18, no. 6, pp. 1410–1415, 2007. View at Google Scholar
  256. H. T. Lübbers, F. Matthews, W. Zemann, K. W. Grätz, J. A. Obwegeser, and M. Bredell, “Registration for computer-navigated surgery in edentulous patients: A problem-based decision concept,” J Craniomaxillofac Surg., vol. 39, no. 6, pp. 453–458, 2011. View at Google Scholar
  257. H. Hoppe, T. Salb, J. Raczkowsky et al., “Expanded reality in head surgery,” Biomed Tech (Berl)., vol. 47, Suppl1 Pt2, pp. 946–949, 2002. View at Google Scholar
  258. R. A. Mischkowski, MJ. Zinser, A. C. Kübler, B. Krug, U. Seifert, and J. E. Zöller, “Application of an augmented reality tool for maxillary positioning in orthognathic surgery - a feasibility study,” J Craniomaxillofac Surg., vol. 34, no. 8, pp. 478–483, 2006. View at Google Scholar
  259. R. Filipo, B. Pichi, G. A. Bertoli, and E. De Seta, “Video-based system for intraoperative facial nerve monitoring: comparison with electromyography,” Otol Neurotol., vol. 23, no. 4, pp. 594–597, 2002. View at Google Scholar
  260. J. Poukens, J. Haex, and D. Riediger, “The use of rapid prototyping in the preoperative planning of distraction osteogenesis of the cranio-maxillofacial skeleton,” Comput Aided Surg., vol. 8, no. 3, pp. 146–154, 2003. View at Google Scholar
  261. M. Mitsugi, O. Ito, and R. E. Alcalde, “Maxillary bone transportation in alveolar cleft-transport distraction osteogenesis for treatment of alveolar cleft repair,” Br J Plast Surg., vol. 58, no. 5, pp. 619–625, 2005. View at Google Scholar
  262. C. M. Cavaliere and S. R. Buchman, “Mandibular distraction in the absence of an ascending ramus and condyle,” J Craniofac Surg., vol. 13, no. 4, pp. 527–532, 2002. View at Google Scholar
  263. K. E. Yamaji, J. Gateno, J. J. Xia, and J. F. Teichgraeber, “New internal Le Fort I distractor for the treatment of midface hypoplasia,” J Craniofac Surg., vol. 15, no. 1, pp. 124–127, 2004. View at Google Scholar
  264. A. Gaggl, G. Schultes, G. Santler, and H. Kärcher, “Three-dimensional planning of alveolar ridge distraction by means of distraction implants,” Comput Aided Surg., vol. 5, no. 1, pp. 35–41, 2000. View at Google Scholar
  265. T. Kanno, M. Mitsugi, S. Sukegawa, M. Hosoe, and Y. Furuki, “Computer-simulated bi-directional alveolar distraction osteogenesis,” Clin Oral Implants Res., vol. 19, no. 12, pp. 1211–1218, 2008. View at Google Scholar
  266. R. Minoretti, A. Triaca, M. Antonini, and B. Merz, “Intra-oral multiaxis mandubular distraction osteogenesis. Clinical analysis of the first six years,” in Distraction osteogenesis of the facial skeleton, Bell Guerrero, Ed., pp. 359–372, BC Decker Ed, 2007. View at Google Scholar
  267. W. Tharanon and D. P. Sinn, “Mandibular distraction osteogenesis with multidirectional extraoral distraction device in hemifacial microsomia patients: three-dimensional treatment planning, prediction tracings, and case outcomes,” J Craniofac Surg., vol. 10, no. 3, pp. 202–213, 1999. View at Google Scholar
  268. D. W. Dorfman, F. S. Ciminello, and G. B. Wong, “Craniofacial distractor applicator,” J Craniofac Surg., vol. 20, no. 2, pp. 475–477, 2009. View at Google Scholar
  269. J. Gateno, J. F. Teichgraeber, and J. J. Xia, “Three-dimensional surgical planning for maxillary and midface distraction osteogenesis,” J Craniofac Surg., vol. 14, no. 6, pp. 833–839, 2003. View at Google Scholar
  270. K. Yeshwant, E. B. Seldin, J. Gateno et al., “Analysis of skeletal movements in mandibular distraction osteogenesis,” J Oral Maxillofac Surg., vol. 63, no. 3, pp. 335–340, 2005. View at Google Scholar
  271. M. Robiony, I. Salvo, F. Costa et al., “Virtual reality surgical planning for maxillofacial distraction osteogenesis: the role of reverse engineering rapid prototyping and cooperative work,” J Oral Maxillofac Surg., vol. 65, no. 6, pp. 1198–1208, 2007. View at Google Scholar
  272. T. Kofod, T. K. Pedersen, S. E. Nørholt, and J. Jensen, “Stereolithographic models for simulation and transfer of vector in vertical distraction of the mandibular ramus: a technical note,” J Craniofac Surg., vol. 16, no. 4, pp. 608–614, 2005. View at Google Scholar
  273. A. Yamada, K. Imai, T. Nomachi, T. Fujimoto, H. Sakamoto, and S. Kitano, “Cranial distraction for plagiocephaly: quantitative morphologic analyses of cranium using three-dimensional computed tomography and a life-size model,” J Craniofac Surg., vol. 16, no. 4, pp. 688–693, 2005. View at Google Scholar
  274. K. Minami, Y. Mori, K. Tae-Geon, H. Shimizu, M. Ohtani, and Y. Yura, “Maxillary distraction osteogenesis in cleft lip and palate patients with skeletal anchorage,” Cleft Palate Craniofac J., vol. 44, no. 2, pp. 137–141, 2007. View at Google Scholar
  275. D. H. Whitman and B. Connaughton, “Model surgery prediction for mandibular midline distraction osteogenesis,” Int J Oral Maxillofac Surg., vol. 28, no. 6, pp. 421–423, 1999. View at Google Scholar
  276. T. Kofod, S. E. Nørholt, T. K. Pedersen, and J. Jensen, “Reliability of distraction vector transfer in unilateral vertical distraction of the mandibular ramus,” J Craniofac Surg., vol. 16, no. 1, pp. 15–22, 2005. View at Google Scholar
  277. H. T. Lübbers, P. Messmer, K. W. Grätz, R. E. Ellis, and F. Matthews, “Misjudgments at the mandibular angle: freehand versus computer-assisted screw positioning,” J Craniofac Surg., vol. 21, no. 4, pp. 1012–1017, 2010. View at Google Scholar
  278. H. T. Lübbers, A. Kruse, P. Messmer, K. W. Grätz, J. A. Obwegeser, and F. Matthews, “Precise screw positioning at the mandibular angle: computer assisted versus template coded,” J Craniofac Surg., vol. 22, no. 2, pp. 620–624, 2011. View at Google Scholar
  279. W. Korb, D. Engel, R. Boesecke et al., “Development and first patient trial of a surgical robot for complex trajectory milling,” Comput Aided Surg., vol. 8, no. 5, pp. 247–256, 2003. View at Google Scholar
  280. T. Fortin, G. Champleboux, S. Bianchi, H. Buatois, and J. L. Coudert, “Precision of transfer of preoperative planning for oral implants based on cone-beam CT-scan images through a robotic drilling machine,” Clin Oral Implants Res., vol. 13, no. 6, pp. 651–656, 2002. View at Google Scholar
  281. O. Schermeier, T. Lueth, J. Glagau et al., “Automatic patient registration in computer assisted maxillofacial surgery,” Stud Health Technol Inform., vol. 85, pp. 461–467, 2002. View at Google Scholar
  282. M. Klein, A. Hein, T. Lueth, and J. Bier, “Robot-assisted placement of craniofacial implants,” Int J Oral Maxillofac Implants., vol. 18, no. 5, pp. 712–718, 2003. View at Google Scholar
  283. B. W. O'Malley Jr., G. S. Weinstein, W. Snyder, and N. G. Hockstein, “Transoral robotic surgery (TORS) for base of tongue neoplasms,” Laryngoscope, vol. 116, no. 8, pp. 1465–1472, 2006. View at Google Scholar
  284. G. Kane, G. Eggers, R. Boesecke et al., “System design of a hand-held mobile robot for craniotomy,” Med Image Comput Comput Assist Interv., vol. 12, Pt1, pp. 402–409, 2009. View at Google Scholar
  285. P. Bast, A. Popovic, T. Wu et al., “Robot- and computer-assisted craniotomy: resection planning, implant modelling and robot safety,” Int J Med Robot., vol. 2, no. 2, pp. 168–178, 2006. View at Google Scholar
  286. G. Eggers, C. Wirtz, W. Korb et al., “Robot-assisted craniotomy,” Minim Invasive Neurosurg., vol. 48, no. 3, pp. 154–158, 2005. View at Google Scholar
  287. C. T. Chen and K. Adriane, “Endoscopic resection of a mandibular body and condylar osteoma,” Minim Invasive Ther Allied Technol., vol. 17, no. 5, pp. 323–325, 2008. View at Google Scholar
  288. M. Y. Mommaerts, “Endoscopically assisted sagittal split osteotomy for mandibular lengthening: technical note and initial experience,” J Craniomaxillofac Surg., vol. 38, no. 2, pp. 108–112, 2010. View at Google Scholar
  289. E. B. Strong, “Endoscopic repair of anterior table frontal sinus fractures,” Facial Plast Surg., vol. 25, no. 1, pp. 43–48, 2009. View at Google Scholar
  290. G. Lauer, W. Pradel, M. Schneider, and U. Eckelt, “A new 3-dimensional plate for transoral endoscopicassisted osteosynthesis of condylar neck fractures,” J Oral Maxillofac Surg., vol. 65, no. 5, pp. 964–971, 2007. View at Google Scholar
  291. R. Schmelzeisen, R. Cienfuegos-Monroy, R. Schön, CT. Chen, L. Cunningham Jr, and S. Goldhahn, “Patient benefit from endoscopically assisted fixation of condylar neck fractures—a randomized controlled trial,” J Oral Maxillofac Surg., vol. 67, no. 1, pp. 147–158, 2009. View at Google Scholar
  292. O. Nahlieli, J. Moshonov, A. Zagury, E. Michaeli, and N. Casap, “Endoscopic approach to dental implantology,” J Oral Maxillofac Surg., vol. 69, no. 1, pp. 186–191, 2011. View at Google Scholar
  293. M. D. Turner, “Sialoendoscopy and salivary gland sparing surgery,” Oral Maxillofac Surg Clin North Am., vol. 21, no. 3, pp. 323–329, 2009. View at Google Scholar
  294. R. Olszewski, K. Tran Duy, B. Raucent, A. Hebda, and H. Reychler, “Communicating a clinical problem to the engineers: towards a common methodology,” Int J Oral Maxillofac Surg., vol. 37, no. 3, pp. 269–274, 2008. View at Google Scholar