Table of Contents Author Guidelines Submit a Manuscript
Journal of Healthcare Engineering
Volume 2017, Article ID 9053764, 6 pages
https://doi.org/10.1155/2017/9053764
Research Article

A 3D-Printed Sensor for Monitoring Biosignals in Small Animals

1School of Electrical Engineering and Computer Science, Gwangju Institute of Science and Technology (GIST), Gwangju 61005, Republic of Korea
2School of Mechanical Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju 61005, Republic of Korea
3Chonnam National University Medical School, Gwangju 61469, Republic of Korea
4Department of Robotics Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea

Correspondence should be addressed to Sohee Kim; rk.ca.tsigd@mikeehos

Received 19 May 2017; Accepted 2 October 2017; Published 25 October 2017

Academic Editor: Antonio Gloria

Copyright © 2017 Sung-Joon Cho et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Sung-Joon Cho, Donghak Byun, Tai-Seung Nam, et al., “A 3D-Printed Sensor for Monitoring Biosignals in Small Animals,” Journal of Healthcare Engineering, vol. 2017, Article ID 9053764, 6 pages, 2017. https://doi.org/10.1155/2017/9053764.