Research Article
Applying Human Factors Engineering Methods for Risk Assessment of a Neonatal Incubator
| | Tasks |
| (1) | Turn on the neonatal incubator | (2) | Connect the skin sensor | (3) | Connect the humidity sensor | (4) | Connect the auxiliary sensor | (5) | Set the skin sensor temperature to 36.4°C | (6) | Set humidity to 60% | (7) | Select the trend graphic of air temperature | (8) | Verify the trend graphic of skin temperature | (9) | Verify the trend graphic of humidity | (10) | Set hour and date | (11) | Lock the keyboard | (12) | Write on a paper the hour and date, and the humidity and the temperatures of Air mode, Skin Mode, and Auxiliary mode | (13) | Locate the water reservoir compartment | (14) | Remove the water reservoir from the compartment | (15) | Locate the air filter | (16) | Check air filter replacement date | (17) | Adjust trend graphical display in 8 h | (18) | Identify input for limited oxygen hose | (19) | Identify the compartment for the X-ray plate | (20) | Locate the button for contrast adjustment of monitor | (21) | Locate connector for computer cable | (22) | Raise the bed at the head height and then at the feet height | (23) | Identify alarms | (24) | Read the patient’s identification card | (25) | Identify the Air Mode and Skin Mode |
|
|
Source: author.
|