Table of Contents
Journal of Metallurgy
Volume 2009 (2009), Article ID 853092, 4 pages
http://dx.doi.org/10.1155/2009/853092
Research Article

Machinable Cu-40 % Zn Composites Containing Graphite Particles by Powder Metallurgy Process

1Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaragi, Osaka 567-0047, Japan
2Development and engineering division, SAN-ETSU METAL Co. Ltd, 1892 Ota, Tonami, Toyama 939-1315, Japan

Received 29 December 2008; Accepted 11 March 2009

Academic Editor: Ludo Froyen

Copyright © 2009 Katsuyoshi Kondoh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Katsuyoshi Kondoh, Hisashi Imai, Yoshiharu Kosaka, Akimichi Kojima, and Junko Umeda, “Machinable Cu-40 Zn Composites Containing Graphite Particles by Powder Metallurgy Process,” Journal of Metallurgy, vol. 2009, Article ID 853092, 4 pages, 2009. doi:10.1155/2009/853092