Table of Contents
Journal of Metallurgy
Volume 2012 (2012), Article ID 539823, 9 pages
http://dx.doi.org/10.1155/2012/539823
Research Article

Developing 1D MM of Axisymmetric Transient Quenched Chromium Steel to Determine LHP

Mechanical Engineering Department, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, 86400 Parit Raja, Malaysia

Received 4 November 2011; Revised 1 January 2012; Accepted 8 January 2012

Academic Editor: Elena V. Pereloma

Copyright © 2012 Abdlmanam S. A. Elmaryami and Badrul Omar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Abdlmanam S. A. Elmaryami and Badrul Omar, “Developing 1D MM of Axisymmetric Transient Quenched Chromium Steel to Determine LHP,” Journal of Metallurgy, vol. 2012, Article ID 539823, 9 pages, 2012. doi:10.1155/2012/539823