Table of Contents
Journal of Metallurgy
Volume 2014 (2014), Article ID 637031, 6 pages
http://dx.doi.org/10.1155/2014/637031
Research Article

On the Designing, Efficiency, and Stirring Force of an Induction Coil for the Processing of Prototype Al Based Nanocomposites

School of Materials and Chemical Engineering, National University of Sciences and Technology, Islamabad 46000, Pakistan

Received 29 September 2014; Accepted 16 December 2014; Published 31 December 2014

Academic Editor: Brij Kumar Dhindaw

Copyright © 2014 Muhammad Mansoor and Muhammad Shahid. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Muhammad Mansoor and Muhammad Shahid, “On the Designing, Efficiency, and Stirring Force of an Induction Coil for the Processing of Prototype Al Based Nanocomposites,” Journal of Metallurgy, vol. 2014, Article ID 637031, 6 pages, 2014. doi:10.1155/2014/637031