Table of Contents
Journal of Metallurgy
Volume 2016, Article ID 3685312, 8 pages
http://dx.doi.org/10.1155/2016/3685312
Research Article

Microstructural and Surface Texture Analysis due to Machining in Super Austenitic Stainless Steel

School of Engineering, Deakin University, Waurn Ponds, VIC 3216, Australia

Received 6 June 2016; Revised 24 August 2016; Accepted 4 September 2016

Academic Editor: Elena V. Pereloma

Copyright © 2016 Mohanad Alabdullah et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. G. Benardos and G.-C. Vosniakos, “Predicting surface roughness in machining: a review,” International Journal of Machine Tools and Manufacture, vol. 43, no. 8, pp. 833–844, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. D. Umbrello, G. Ambrogio, L. Filice, and R. Shivpuri, “A hybrid finite element method-artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel,” Materials & Design, vol. 29, no. 4, pp. 873–883, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Polishetty, M. F. A. Alabdullah, N. Pillay, and G. Littlefair, “A preliminary study on machinability of super austenitic stainless steel,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Paper no. IMECE2015-50224, American Society of Mechanical Engineers, Houston, Tex, USA, November 2015. View at Publisher · View at Google Scholar
  4. M. Daud, W. T. Ng, D. L. Sivakumar, and M. Z. Selamat, “The evaluation of machinability and surface roughness in conventional vertical milling machine,” in Proceedings of the Proceedings of Mechanical Engineering Research Day (MERD '15), pp. 133–134, Centre for Advanced Research on Energy, March 2015.
  5. S. Berkani, L. Bouzid, H. Bensouilah, M. A. Yallese, F. Girardin, and T. Mabrouki, “Modeling and optimization of tool wear and surface roughness in turning of austenitic stainless steel using response surface methodology,” in Proceedings of the 22ème Congrès Français de Mécanique, Lyon, France, 2015, http://hdl.handle.net/2042/57603.
  6. Z. Yin, C. Huang, J. Yuan, B. Zou, H. Liu, and H. Zhu, “Cutting performance and life prediction of an Al2O3/TiC micro-nano-composite ceramic tool when machining austenitic stainless steel,” Ceramics International, vol. 41, no. 5, pp. 7059–7065, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Ciftci, “Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools,” Tribology International, vol. 39, no. 6, pp. 565–569, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. M. A. Xavior and M. Adithan, “Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel,” Journal of Materials Processing Technology, vol. 209, no. 2, pp. 900–909, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. D. P. Selvaraj and P. Chandramohan, “Optimization of surface roughness of AISI 304 austenitic stainless steel in dry turning operation using Taguchi design method,” Journal of Engineering Science and Technology, vol. 5, no. 3, pp. 293–301, 2010. View at Google Scholar · View at Scopus
  10. A. Çiçek, T. Kıvak, and G. Samtaş, “Application of taguchi method for surface roughness and roundness error in drilling of AISI 316 stainless steel,” Strojniški Vestnik/Journal of Mechanical Engineering, vol. 58, no. 3, pp. 165–174, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Koçer, E. Horozolu, and I. Asiltürk, “Noncontact surface roughness measurement using a vision system,” in Proceedings of the 7th International Conference on Machine Vision (ICMV '14), vol. 9445 of Proceedings of SPIE, November 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S.-B. Liu and H.-F. Yu, “Surface roughness measurement by image processing method,” in Proceedings of the Measurement Technology and Intelligent Instruments, vol. 1323 of Proceedings of SPIE, Wuhan, China, October 2003. View at Publisher · View at Google Scholar
  13. C. Y. Poon and B. Bhushan, “Macro and micro-tribology and mechanics of magnetic storage systems comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler,” Wear, vol. 190, no. 1, pp. 76–88, 1995. View at Publisher · View at Google Scholar
  14. S. N. B. Oliaei and Y. Karpat, “Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V,” Journal of Materials Processing Technology, vol. 235, pp. 28–40, 2016. View at Publisher · View at Google Scholar
  15. B. Fnides and M. Yallese, “Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic,” Mechanics, vol. 70, no. 2, pp. 73–78, 2016. View at Google Scholar
  16. J. Zhou, V. Bushlya, P. Avdovic, and J. E. Ståhl, “Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools,” The International Journal of Advanced Manufacturing Technology, vol. 58, no. 1–4, pp. 141–151, 2012. View at Publisher · View at Google Scholar · View at Scopus