Table of Contents
Journal of Metallurgy
Volume 2016 (2016), Article ID 7407918, 10 pages
http://dx.doi.org/10.1155/2016/7407918
Research Article

Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V

School of Engineering, Faculty of Science, Engineering and Built Environment, Deakin University, Waurn Ponds, Geelong, VIC, Australia

Received 13 June 2016; Revised 16 September 2016; Accepted 18 September 2016

Academic Editor: Sunghak Lee

Copyright © 2016 Manikandakumar Shunmugavel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Manikandakumar Shunmugavel, Ashwin Polishetty, Junior Nomani, Moshe Goldberg, and Guy Littlefair, “Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V,” Journal of Metallurgy, vol. 2016, Article ID 7407918, 10 pages, 2016. doi:10.1155/2016/7407918