Table of Contents
Journal of Metallurgy
Volume 2017, Article ID 1052706, 7 pages
https://doi.org/10.1155/2017/1052706
Research Article

Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

1Nuclear and Energy Research Institute, IPEN, Avenida Lineu Prestes 2242, 05508-000 São Paulo, SP, Brazil
2MAHLE Metal Leve S/A, Rod. Anhanguera, s/n, Tijuco Preto, 13205-700 Jundiaí, SP, Brazil
3School of Engineering, Presbyterian Mackenzie University, Rua da Consolação 930, 01302-901 São Paulo, SP, Brazil

Correspondence should be addressed to Waldemar Alfredo Monteiro; rb.nepi@ietnomaw

Received 26 June 2016; Revised 9 September 2016; Accepted 18 September 2016; Published 18 January 2017

Academic Editor: Eric Jan Mittemeijer

Copyright © 2017 Waldemar Alfredo Monteiro et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Waldemar Alfredo Monteiro, Silvio Andre Lima Pereira, and Jan Vatavuk, “Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels,” Journal of Metallurgy, vol. 2017, Article ID 1052706, 7 pages, 2017. https://doi.org/10.1155/2017/1052706.