Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

<div class="floats-full-page floats-full-page-other"><h2>Table 2</h2><div class="floats-full-page-caption">SEM parameters for the N and C analysis.</div><div class="floats-full-page-content"><table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr /></td></tr><tr><td class="align_left">Work distance</td><td class="align_center">12.25 mm</td></tr><tr><td class="align_left">“Spot size” of the beam</td><td class="align_center">7.5</td></tr><tr><td class="align_left">kV</td><td class="align_center">12</td></tr><tr><td class="align_left">Current density</td><td class="align_center">50 nA</td></tr><tr><td class="align_left">Exposition time</td><td class="align_center">20 s</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr" /></td></tr></table></td></tr></table></div></div>

Table 2 | Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

title

Table 2: Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

description

Table 2

About this journal

Journal profile

Meet the editorial board

Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Journal of Metallurgy

Nitriding Process Characterization of Cold Worked AISI 304 and 316 Austenitic Stainless Steels

Table 2