Table of Contents Author Guidelines Submit a Manuscript
Journal of Materials
Volume 2016, Article ID 3495698, 5 pages
http://dx.doi.org/10.1155/2016/3495698
Research Article

Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si3N4, TiAlN, and TiN Coated Inserts

Department of Mechanical Engineering, R V College of Engineering, Bangalore, Karnataka 560059, India

Received 30 April 2016; Accepted 5 July 2016

Academic Editor: Kalman Varga

Copyright © 2016 Kaushik Vijaya Prasad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kaushik Vijaya Prasad, Ratna Pal, and Vishnu Kuncham Rajendraprasad, “Optimization of Cutting Parameters during Dry Turning of Austenitic Stainless Steel Using nc-AlTiN/Si3N4, TiAlN, and TiN Coated Inserts,” Journal of Materials, vol. 2016, Article ID 3495698, 5 pages, 2016. https://doi.org/10.1155/2016/3495698.