Journal of Marine Sciences / 2012 / Article / Tab 3 / Research Article
Shell Shape Analysis and Spatial Allometry Patterns of Manila Clam (Ruditapes philippinarum ) in a Mesotidal Coastal Lagoon Table 3 Comparison of morphometric results with other sites including Europe.
Site/Area Mean morphometrics results Length (S. D.) indications of the studied population (mm) Sources Japan
from 0.70 to 0.75Range 10.8 (0.60) to 11.5 (0.63) Deduced from Watanabe and Katayama [23 ]—Figure 3
from 0.40 to 0.45China
= 0.69Mean Length 20.35 (1.35) Deduced from Fan et al. [33 ]—Table 1
= 0.44Spain (bottom culture)
from 0.58 to 0.73Range 13.7 (0.26) to 26.6 (0.43) Deduced from Cigarría and Fernández [18 ]—Table 1
from 0.41 to 0.48Tunisia
= 0.69Mean Length 35.0 (3.82) Deduced from Ben Ouada et al. [30 ]—Table 1
= 0.44Italy
= 0.71Mean Length 39.2 (5.7) Deduced from Geri et al. [34 ]—Table 1
= 0.50France (Barfleur)
from 0.68 to 0.71Range 19 to 33 Deduced from Gérard [7 ]—Figures 32 and 36
from 0.40 to 0.48
Note: after having checked for valves symmetry on a subsample, the W/L ratio (obtained by TNPC system) for Arcachon was multiplied by two in order to allow for realistic comparison with published ratios.