Table of Contents
Journal of Medical Engineering
Volume 2013, Article ID 891759, 11 pages
http://dx.doi.org/10.1155/2013/891759
Research Article

Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee

1Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 Selangor, Malaysia
2Faculty of Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
3Institute of Advanced Technology, ITMA, Universiti Putra Malaysia, Selangor, Malaysia
4Department of Orthopedic Surgery, Faculty of Medicine & Health Science, Universiti Putra Malaysia, Selangor, Malaysia
5Department of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran

Received 24 February 2013; Revised 9 June 2013; Accepted 15 July 2013

Academic Editor: Kaisar Alam

Copyright © 2013 Marjan Bahraminasab et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Marjan Bahraminasab, Ali Jahan, Barkawi Sahari, Manohar Arumugam, Mahmoud Shamsborhan, and Mohd Roshdi Hassan, “Using Design of Experiments Methods for Assessing Peak Contact Pressure to Material Properties of Soft Tissue in Human Knee,” Journal of Medical Engineering, vol. 2013, Article ID 891759, 11 pages, 2013. https://doi.org/10.1155/2013/891759.