Table of Contents
Journal of Medical Engineering
Volume 2016, Article ID 6191526, 6 pages
http://dx.doi.org/10.1155/2016/6191526
Research Article

Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing

School of Engineering, Department of Mechanical Engineering, Aalto University, Otakaari 4, 02150 Espoo, Finland

Received 8 March 2016; Revised 23 May 2016; Accepted 7 June 2016

Academic Editor: Hengyong Yu

Copyright © 2016 Mika Salmi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Mika Salmi, “Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing,” Journal of Medical Engineering, vol. 2016, Article ID 6191526, 6 pages, 2016. https://doi.org/10.1155/2016/6191526.