Abstract

Structure-activity relationship studies were carried out on macrocyclic hexaoxazole (6OTD) dimers, whose core structure stabilizes telomeric G-quadruplexes (G4). Two new 6OTD dimers having side chain amine and guanidine functional groups were synthesized and evaluated for their stabilizing ability against a telomeric G4 DNA sequence. The results show that the 6OTD dimers interact with the DNA to form 1:1 complexes and stabilize the antiparallel G4 structure of DNA in the presence of potassium cation. The guanidine functionalized dimer displays a potent stabilizing ability of the G4 structure, as determined by using a FRET melting assay ( ).

1. Introduction

G-quadruplexes (G4), secondary DNA structures consisting of G-quartet planers in G-rich regions, play significant biological roles for example, control of transcription and telomeric lengths [119]. One typical G4 forming DNA sequence is a telomere, which exists at the ends of chromosomes consisting of repeating single-stranded sequences [112]. Telomeres protect chromosomes from end to end fusion events, which result in replication of the chromosome (the Hayflick limit) [20]. The telomere repeats are elongated by the reverse transcriptase telomerase, which is overexpressed in most tumor cells. In contrast, telomerase activity is not observed in normal somatic cells [21]. Since the activity of this enzyme is inhibited by the G4 structure of telomeres owing to steric hindrance, small molecules that selectively bind and stabilize the telomeric G4 should be potential anticancer agents. As a result, a number of G4 ligands, inspired by artificial DNA intercalators as well as natural products, have been developed during the past decade [22].

Telomestatin (TMS) is a natural product isolated from Streptomyces anulatus 3533-SV4, which displays one of the most potent telomeric G4 binding activity (Figure 1) [2328]. Interaction analysis has shown that two molecules of TMS induce conversion of telomeric G4 into an antiparallel type by way of an end stacking mode [2528]. We have recently developed macrocyclic hexaoxazole compounds 6OTD, containing a variety of side chain functional groups, that serve as a novel TMS derivative [2932]. In addition, by considering the proposed binding mode of TMS with telomeric G4, we have carried out further structural development of dimeric 6OTD derivatives (Figure 1) [33]. The results of molecular dynamics calculations guided the selection of 6OTD dimer 1 that contains an appropriate length of a linker between the monomeric units of 6OTD. Studies showed that dimer 1 binds to telomeric G4 more tightly than do other 6OTD dimers with linkers of shorter or longer lengths. One possible structural development strategy to enhance the stabilizing ability of 1 against the G4 would be to install cationic functional groups on the side chain [30]. Below, we describe synthesis of new 6OTD dimers 2 and 3 that derivatize 1 but possess cationic amine and guanidine functional groups on their side chains. In addition, the ability of these substances to stabilize telomeric G4 along with their interaction mode was investigated.

2. Materials and Methods

2.1. General

Flash chromatography was performed on Silica gel 60 (spherical, particle size 0.040 ~ 0.100 μm; Kanto). Optical rotations were measured on a JASCO P-2200 polarimeter, using the sodium D line. and NMR spectra were recorded on JEOL JNM-ECX 300, 400, and 500. The spectra are referenced internally according to residual solvent signals of CDCl3 ( NMR;  ppm, NMR ; ppm) and DMSO ( NMR;  ppm, NMR;  ppm). Data for NMR are recorded as follows: chemical shift ( , ppm), multiplicity (s, singlet; d, doublet; m, multiplet; br, broad), integration, and coupling constant (Hz). Data for NMR are reported in terms of chemical shift ( , ppm). Mass spectra were recorded on a JEOL JMS-T100X spectrometer with ESI-MASS mode using methanol as solvent. All oligonucleotides purified were obtained from Sigma Genosys and dissolved in double-distilled water to be used without further purification. Fluorescence resonance energy transfer (FRET) melting assay was made with an excitation wavelength of 470–505 nm and a detection wavelength of 523–543 nm using the DNA Engine Opticon 2 Real-Time Cycler PCR detection system (BioRad). CD spectra were recorded on a JASCO-810 spectropolarimeter (Jasco, Easton, MD) using a quartz cell of 1 mm optical path length and an instrument scanning speed of 500 nm/min with a response time of 1 s, and over a wavelength range of 220–320 nm. CD spectra are representative of ten averaged scans taken at .

2.2. Synthesis

Synthesis of 5
To a solution of trioxazole 4 (2.1 g, 3.6 mmol) in MeOH-THF (1 : 1, 60 mL) was added Pd /C (420 mg), and the reaction mixture was stirred at room temperature under hydrogen gas (balloon). After 3 h, the catalyst was removed by filtration through a pad of Celite, and the filtrates were concentrated in vacuo to give amine 5, which was used without further purification.

Synthesis of 7
To a solution of trioxazole 6 (2.1 g, 3.6 mmol) in THF- (3 : 1, 80 mL) was added LiOH (230 mg, 5.4 mmol) at . After stirring at room temperature for 1 h,to the resulting mixture was added 1 N HCl, to give carboxylic acid 7, which was used without further purification.

Synthesis of 8
To a solution of amine 5 (abovementioned) in THF- (1 : 1) was added the carboxylic acid 7 (abovementioned), N-methylmorpholine (1.2 mL, 11 mmol), and 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM) (3.0 g, 11 mmol), and the mixture was stirred at room temperature for 15 h. To the reaction mixture was added H2O and precipitate was formed. This precipitate was collected with filtration using filter paper, to give 8 as a white solid (3.3 g, 3.2 mmol 89% 2 steps, mp = 200– ). Spectral data for 8: = −2.7 (c 1.1, CHCl –MeOH (1 : 1)); 1H NMR (300 MHz, CDCl3) (s, 1H), 8.35–8.27 (m, 5H), 7.53 (d, J = 8.9 Hz, 1H), 7.34 (m, 5H), 5.98–5.81 (m, 1H), 5.57–5.44 (m, 2H), 5.30 (d, J = 18 Hz, 1H), 5.21 (d, J = 11 Hz, 1H), 5.15–4.97 (m, 2H), 4.82 (br, 1H), 4.58 (d, J = 5.5 Hz, 3H), 3.95 (s, 3H), 3.30–3.01 (m, 4H), 2.25–1.80 (m, 4H), 1.70–1.30 (m, 17H); NMR (125 MHz, DMSO ) 165.7, 165.2, 160.9, 159.8, 156.1, 155.8, 155.7, 155.6, 155.0, 154.4, 145.7, 142.8, 141.0, 140.9, 140.7, 137.3, 136.6, 133.4, 133.3, 130.1, 130.0, 128.9, 128.8, 128.3, 127.7, 117.3, 77.3, 65.1, 64.9, 64.7, 52.0, 48.9, 46.8, 31.8, 31.3, 29.2, 28.9, 28.2, 28.1, 22.8, 22.6; HRMS (ESI, ) calcd for C48H52N10O15Na 1031.3511, found 1031.3479.

Synthesis of 9
To a solution of bis-trioxazole 8 (510 mg, 0.50 mmol) in DMF-THF ( , 30 mL) was added morpholine (440  , 5.0 mmol) and Pd(PPh3)4 (29 mg, 0.025 mmol), and the mixture was stirred at room temperature for 1 h. To the reaction mixture was added ether and precipitate was formed. This precipitate was collected with filtration using filter paper. The solid was purified by column chromatography on silica gel (CHCl -MeOH = ) to give 9 (460 mg, 0.50 mmol 99%). Spectral data for 9: = 28 (c 1.0, CHCl -MeOH ( )); 1H NMR (300 MHz, CDCl3) (s, 1H), 8.35–8.25 (m, 5H), 7.53 (d, J = 8.9 Hz, 1H), 7.33 (m, 5H), 5.56–5.43 (m, 1H), 5.08 (br, 2H), 4.80 (br, 1H), 4.56 (br, 1H), 4.14–4.05 (m, 1H), 3.95 (s, 3H), 3.26–3.04 (m, 4H), 2.25–1.75 (m, 4H), 1.73–1.30 (m, 17H); 13C NMR (125 MHz, DMSO ) , 165.2, 160.9, 159.8, 156.1, 155.9, 155.7, 155.6, 154.9, 154.4, 145.7, 142.7, 141.0, 140.9, 140.6, 140.5, 137.3, 136.6, 133.3, 130.0, 129.9, 128.8, 128.5, 128.3, 127.7, 77.3, 65.1, 52.0, 49.4, 46.7, 35.3, 31.3, 29.2, 28.2, 28.1, 22.8, 22.6; HRMS (ESI, a) calcd for C44H48N10O13Na 947.3300, found 947.3308.

Synthesis of 10
To a solution of bis-trioxazole 9 (2.2 g, 2.4 mmol) in THF-H2O ( , 200 mL) was added lithium hydroxide (300 mg, 7.2 mmol), and the mixture was stirred at room temperature for 2 h. To the reaction mixture was added 1N HCl, and the resulting mixture was concentrated in vacuo. To the residual solution in DMF-CH2Cl2 ( , 800 mL) was added DMAP (1.5 g, 12 mmol), diisopropylethylamine (2.0 mL, 12 mmol), and DPPA (2.6 mL, 12 mmol), and the resulting mixture was stirred for 22 h at . To the reaction mixture was added and the organic layer was extracted with ethyl acetate. The extracts were washed with brine, dried over MgSO4, filtered, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (ethyl acetate 100%) to give 10 as a white solid (1.7 g, 1.9 mmol 79%, mp = 220– dec). Spectral data for 10: = −12 (c 0.4, CHCl3-MeOH ( )); NMR (400 MHz, CDCl3) (d, J = 7.3 Hz, 2H), 8.25–8.16 (m, 6H), 7.36–7.27 (m, 5H), 5.47–5.37 (m, 2H), 5.05 (br, 2H), 4.89 (br, 1H), 4.59 (br, 1H), 3.22–2.98 (m, 4H), 2.30–1.89 (m, 4H), 1.62–1.18 (m, 17H); NMR (100 MHz, CDCl3) , 164.7, 161.2, 159.9, 159.8, 156.3, 156.0, 155.9, 154.6, 141.0, 140.9, 139.1, 138.4, 136.9, 136.8, 136.6, 130.9, 129.6, 128.4, 128.1, 128.0, 79.0, 66.5, 47.8, 47.7, 40.7, 40.3, 34.6, 29.5, 29.2, 28.4, 21.9, 21.8; HRMS (ESI, a) calcd for C43H44N10O12Na 915.3038, found 915.2999.

Synthesis of 11
To a solution of macrocyclic bis-amide 10 (200 mg, 220  mol) in MeOH (50 mL) was added Pd(OH)2/C (80 mg) and the reaction mixture was stirred at room temperature under hydrogen (balloon). After 5 h, the reaction mixture was filtered through a pad of Celite, and the filtrates were concentrated in vacuo. To the residual solution in DMF-MeCN (1 : 1, 4.0 mL) was added diisopropylethylamine ( L, 1.1 mmol) and adipoyl chloride ( L, mol), and the mixture was stirred at room temperature for 11 h. The reaction mixture was concentrated in vacuo, and the residue was acidified with 0.1 N HCl and extracted with CHCl3. The organic layer was dried over MgSO4, filtrated, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (CHCl3–AcOEt–MeOH = 3 : 2 : 1) to give 11 (51 mg, 31  mol, 28%). Spectral data for 11: = −11 (c 0.95, CHCl -MeOH ( )); 1H NMR (500 MHz, CDCl3) 8.67–8.48 (m, 4H), 8.27–8.15 (m, 12H), 6.38 (br, 2H), 5.47–5.38 (m, 4H), 4.84 (br, 2H), 3.30–2.98 (m, 8H), 2.15–1.90 (m, 12H), 1.65–1.10 (m, 38H); NMR (125 MHz, CDCl3) 173.0, 164.9, 164.8, 159.8, 159.7, 156.2, 156.1, 156.0, 154.7, 154.6, 141.0, 140.9, 139.5, 139.3, 138.7, 138.6, 136.9, 136.8, 130.8, 129.5, 129.3, 78.9, 47.8, 47.7, 40.3, 38.9, 36.0, 34.5, 34.3, 29.7, 29.5, 28.8, 28.4, 25.1, 21.9, 21.7; HRMS (ESI, a) calcd for C76H82N20O22Na 1649.5810, found 1649.5811.

Synthesis of 2
A solution of 11 (50 mg, 31  ) in CH2Cl2-TFA ( , 25 mL) was stirred at room temperature for 2 h. The reaction mixture was concentrated in vacuo to give 2 as a white solid (50 mg, 30  mol, 98%, mp = 225– C dec). Spectral data for 2: = 72 (c 0.3, CHCl -MeOH (1 : 1)); 1H NMR (500 MHz, DMSO ) δ 9.15–9.08 (m, 8H), 8.95–8.89 (m, 4H), 8.38 (d, J = 6.9 Hz, 2H), 8.30 (d, J = 6.9 Hz, 1H), 7.80–7.53 (m, 6H), 5.50–5.35 (m, 4H), 2.98–2.89 (m, 4H), 2.78–2.89 (m, 4H), 2.15–1.85 (m, 12H), 1.55–1.00 (m, 20H); 13C NMR (125 MHz, DMSO ) 171.7, 164.5, 164.3, 158.8, 158.7, 155.6, 154.5, 142.5, 141.9, 141.8, 141.1, 136.0, 129.8, 129.7, 128.5, 128.4, 47.4, 47.3, 38.6, 38.1, 35.1, 33.1, 28.7, 26.7, 24.9, 21.3, 20.8; HRMS (ESI, ) calcd for C66H67N20O18 1427.4942, found 1427.4961.

Synthesis of 12
To a solution of 2 (50 mg, 30  mol) in MeOH (5.0 mL) was added Amberlyst A-26(OH) ion-exchange resin, and the mixture was stirred for 30 minutes. The resulting mixture was filtered through a cotton with MeOH, and the filtrates were concentrated in vacuo. To a residual solution of 2 in DMF (5.0 mL) was added diisopropylethylamine ( L, 0.31 mmol), HgCl2 (50 mg, 0.18 mmol), and 1,3-Bis(tertbutoxycarbonyl)-2-methyl-2-thiopseudourea (66 mg, 0.18 mmol), and the mixture was stirred for 1 h at room temperature. To the reaction mixture was added H2O, and the organic layer was extracted with ethyl acetate. The extracts were dried over MgSO4, filtered, and concentrated in vacuo. The residue was chromatographed on silica gel (CHCl3-ethyl acetate-MeOH = 3 : 2 : 1) to give 12 as a white solid (30 mg, 16  mol, 52%). Spectral data for 12: = 3.8 (c 1.4, CHCl -MeOH (1 : 1)); NMR (500 MHz, CDCl3) (br, 2H), 8.57–8.48 (m, 4H), 8.30–8.17 (m, 14H), 6.17 (br, 2H), 5.45–5.36 (m, 4H), 3.41–3.32 (m 4H), 3.28–3.10 (m, 4H), 2.20–1.88 (m, 12H), 1.65–1.20 (m, 56H); NMR (125 MHz, CDCl3) , 164.8, 164.7, 163.5, 159.9, 159.7, 156.1, 156.0, 154.7, 154.6, 153.2, 141.0, 140.9, 139.3, 139.2, 138.6, 138.5, 136.9, 136.8, 130.8, 129.6, 129.5, 82.9, 79.1, 47.7, 47.6, 40.5, 39.1, 36.0, 34.7, 28.7, 28.6, 28.2, 28.0, 25.0, 22.1, 22.0; HRMS (ESI, a) calcd for C88H102N24O26Na 1933.7295, found 1933.7332.

Synthesis of 3
A solution of 12 (29 mg, 31  mol) in CH2Cl2-TFA (3 : 1, 2.0 mL) was stirred at room temperature for 2 h. To the reaction mixture was added ether and precipitate was formed. This precipitate was collected with filtration using filter paper, to give 3 as a white solid (20 mg, 12  mol, 80%, mp = 220– dec). Spectral data for 3: = −18 (c 0.75, CHCl -MeOH (1 : 1)); NMR (400 MHz, DMSO ) 9.14–9.08 (m, 8H), 8.94–8.90 (m, 4H), 8.37 (d, J = 7.3 Hz, 1H), 8.32 (d, J = 7.3 Hz, 1H), 7.75–7.69 (m, 2H), 7.51–7.45 (m, 2H), 5.48–5.37 (m, 4H), 3.08–2.90 (m, 8H), 2.15–1.84 (m, 12H), 1.50–1.00 (m, 20H); NMR (125 MHz, DMSO ) 171.7, 164.5, 164.4, 158.8, 158.7, 156.7, 155.7, 155.6, 154.5, 142.5, 141.8, 141.1, 136.0, 129.8, 129.7, 128.5, 128.4, 47.4, 40.5, 38.1, 35.1, 33.4, 33.3, 28.7, 28.2, 24.9, 21.3, 21.0; HRMS (ESI, ) calcd for C68H71N24O18 1511.5378, found 1511.5368.

2.3. FRET Melting Assay

FRET melting assays were performed as reported methods [34, 35]. The dual fluorescently labeled oligonucleotides Flu-telo21 -FAM-[GGG(TTAGGG)3]-TAMRA- and Flu-ds26 -FAM-[(TA)2GC(TA)2T6(TA)2GC(TA)2]-TAMRA- were used in this protocol. The donor fluorophore was 6-carboxyfluorescein, FAM, and the acceptor fluorophore was 6-carboxytetramethylrhodamine, TAMRA. The oligonucleotides were initially dissolved as a 100  M stock solution in MilliQ water; further dilutions were carried out in 60 mM potassium cacodylate buffer ( ). Dual-labeled DNA was annealed at a concentration of 400 nM by heating at for 5 minutes followed by cooling to room temperature. We added the different concentrations of ligands into different samples, using a total reaction volume of 40  L, with 200 nM of labelled oligonucleotide. Then we lay them at . Following experiments should keep the temperature procedure in real-time PCR and procedure was finished as following: for 5 minutes, then a stepwise increase of every minute from to reach . During the procedures, we measured the FAM after each stepwise.

2.4. CD Spectroscopy

The 10  M oligonucleotide of telo24: ([TTAGGG]4) was dissolved in Tris-HCl buffer (50 mM, ) and the solution was heated to for 5 minutes, then slowly cooled to . G4 ligands were diluted from 10 mM stock solutions to give a concentration of 1 mM with water and added into the oligonucleotide samples at 50  M (the 10 mM stock solutions of 2 and 3 were made in DMSO).

2.5. ESI-MASS Spectrometry

ESI-MASS spectra were recorded in a negative-ion mode with JEOL JMS-T100X spectrometer. The direct-infusion flow rate was . All experiments were performed in 20 mM NH4OAc containing 10  M of telo24 and 40  M of 2 and 3. Methanol (15%) was added just before injection.

3. Results and Discussion

3.1. Synthesis of 6OTD Dimers 2 and 3

The 6OTD dimers 2 and 3 were synthesized by using the sequences as shown in Scheme 1. Trioxazoles 4 and 6 were synthesized starting with L-serine and L-lysine, respectively by using the previously reported procedure [29, 30, 3638]. The Cbz group of 4 was removed by treatment with hydrogen in the presence of Pd(OH)2/C to give amine 5. Hydrolysis of the ester group in 6 with lithium hydroxide followed by coupling of the resulting acid with amine 5 using DMT-MM [39] gave the bis-trioxazole amide 8. Cleavage of the allyloxycarbonyl group in 8 and hydrolysis of the ester group produced an amino acid, which was subjected to macrocyclization under high dilution conditions (5 mM) to give 6OTD 10. The Cbz group in 10 was removed with hydrogen in the presence of Pd(OH)2/C to give corresponding amine. The procedure for synthesis of dimer 11 involved coupling of the amine with adipoyl chloride. Bis-amine 2 was obtained by removal of the Boc group of 11 with TFA. Preparation of the guanidine derivative 3 was carried out by guanidination of the amine moiety in 2 by using 1,3-bis(tert-butoxycarbonyl)-2-methyl-2-thiopseudourea followed by deprotection of Boc group with TFA.

217627.sch.001
3.2. Binding Properties of 2 and 3 toward Telomeric G4

With the desired 6OTD dimers 2 and 3 in hand, their mode of interaction with the telomeric DNA (telo24) was investigated. Firstly, conformational changes of telo24, induced by these substances were evaluated using circular dichroism (CD) spectroscopy. Upon treatment of telo24 with 6OTD dimers 2 and 3 (50  M) in the presence of potassium chloride (100 mM), the mixed-type structure induced by potassium cation (solid line in Figure 2) is transformed to a typical antiparallel-type G4 structure (dashed line in Figure 2) [28, 40]1. The binding stoichiometries of the complexes formed between the telo24 and ligands and 3 (molar ratio = 1 : 4) were determined by using ESI-MASS spectrometric analysis [41, 42]. In both cases, only mass peaks that correspond to 1 : 1 complexes of both 2 and 3 with telo24 were observed (at the 7-, 6- or in the 5-charge states). Since these interaction modes are the same as that of 6OTD dimer 1, the newly synthesized 6OTD dimers 2 and 3 appear to interact with telo24 through an end stacking mode using two 6OTD moieties in a manner similar to that of TMS and/or 6OTD dimer 1 (Figures 4 and 6) [33,]2,3.

The ability to stabilize the G4 structure of telo24 by 6OTD dimers 2 and 3 was evaluated by employing a fluorescence resonance energy transfer -(FRET-) based assay [34, 35]. The values of labeled oligonucleotide flu-telo21 with 2 and 3 at a concentration of M, which corresponds to 5 equivalents, are 10 and , respectively (Figure 5(a) and Table 1). Since under the same conditions the value for 1 was , among the substances explored to date guanidine 3 is a potent stabilizer of the G4 structure4. This stabilization effect is likely caused by the attractive interaction between positively charged guanidinium residue and anionic phosphates backbone of the telomeric G4. Interactions of the ligands with the duplex form of flu-ds26 were also investigated by using the same protocol (Figure 5(b) and Table 1). The observation that no differences in the values exist in the presence or absence of dimers 2 and suggests that these ligands are selective for the telomere DNA sequence.

4. Conclusions

In summary, the efforts described above have led to the design and syntheses of 2 and 3, two novel macrocyclic hexaoxazole dimeric derivatives of 6OTD that have amine and guanidine groups in their respective side chains. These compounds, together with 6OTD dimer acetate 1, were found to induce a change of the telomeric DNA sequence of telo24 into an antiparallel structure through the formation of 1 : 1 complexes with the DNA. The guanidine functionalized 6OTD dimer 3 was determined to have the greatest ability to stabilize the telomere DNA sequence. Also, both dimers selectively bind to the telomeric DNA sequence and not double-stranded DNA. Further studies, aimed at the structural development of 6OTD dimers with different linkers, are currently underway.

Acknowledgments

This work was supported in part by the Novartis Foundation (Japan) for the Promotion of Science, a Grant-in-Aid for Exploratory Research (21655060), and a Grant under the Industrial Technology Research Grant Program (01A04006b) from the New Energy and Industrial Technology Development Organization (NEDO) of Japan. Keisuke Iida and Masayuki Tera are grateful for a JSPS Research Fellowship for Young Scientists and a grant under the education program “Human Resource Development Program for Scientific Powerhouse” provided through Tokyo University of Agriculture & Technology.

Endnotes

  1. Telomeric antiparallel intramolecular G-quadruplexes have characteristic CD spectra consisting of a positive peak at 290 nm and a negative peak at 260 nm [28, 40].
  2. A similar conformational change was observed for 6OTD dimer 1 by using CD spectroscopic analysis of a solution of 10  M of telo24 in the presence of potassium chloride (100 mM) and Tris-HCl buffer (50 mM, ) as shown in Figure 6 (solid line: telo24 + KCl, dashed line: telo24 + KCl + dimer 1).
  3. The 6OTD dimer 1 also interacts with telo24 by forming 1 : 1 complex based on ESI-MASS analysis [33].
  4. Under the same measurement conditions, the values in the presence of 1  M 1 are (Flu-telo21) and (Flu-ds26), respectively.