Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2006 (2006), Article ID 32803, 7 pages
http://dx.doi.org/10.1155/JNM/2006/32803

Damping Augmentation of Nanocomposites Using Carbon Nanofiber Paper

1Department of Mechanical Engineering, University of South Alabama, Mobile, AL 36688-0002, USA
2Department of Mechanical Engineering, University of Houston, Houston, TX 77204-4006, USA

Received 11 January 2006; Accepted 4 May 2006

Copyright © 2006 Jihua Gou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Breuer and U. Sundararaj, “Big returns from small fibers: a review of polymer/carbon nanotube composites,” Polymer Composites, vol. 25, no. 6, pp. 630–645, 2004. View at Publisher · View at Google Scholar
  2. E. T. Thostenson, Z. Ren, and T.-W. Chou, “Advances in the science and technology of carbon nanotubes and their composites: a review,” Composites Science and Technology, vol. 61, no. 13, pp. 1899–1912, 2001. View at Publisher · View at Google Scholar
  3. K.-T. Lau and D. Hui, “The revolutionary creation of new advanced materials—carbon nanotube composites,” Composites Part B: Engineering, vol. 33, no. 4, pp. 263–277, 2002. View at Publisher · View at Google Scholar
  4. F. H. Gojny, M. H. G. Wichmann, B. Fiedler, W. Bauhofer, and K. Schulte, “Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites,” Composites Part A: Applied Science and Manufacturing, vol. 36, no. 11, pp. 1525–1535, 2005. View at Publisher · View at Google Scholar
  5. F. H. Gojny, M. H. G. Wichmann, U. Köpke, B. Fiedler, and K. Schulte, “Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content,” Composites Science and Technology, vol. 64, no. 15, pp. 2363–2371, 2004. View at Publisher · View at Google Scholar
  6. D. Qian, E. C. Dickey, R. Andrews, and T. Rantell, “Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites,” Applied Physics Letters, vol. 76, no. 20, pp. 2868–2870, 2000. View at Publisher · View at Google Scholar
  7. L. S. Schadler, S. C. Giannaris, and P. M. Ajayan, “Load transfer in carbon nanotube epoxy composites,” Applied Physics Letters, vol. 73, no. 26, pp. 3842–3844, 1998. View at Publisher · View at Google Scholar
  8. H. Ma, J. Zeng, M. L. Realff, S. Kumar, and D. A. Schiraldi, “Processing, structure, and properties of fibers from polyester/carbon nanofiber composites,” Composites Science and Technology, vol. 63, no. 11, pp. 1617–1628, 2003. View at Publisher · View at Google Scholar
  9. C. Bower, R. Rosen, L. Jin, J. Han, and O. Zhou, “Deformation of carbon nanotubes in nanotube-polymer composites,” Applied Physics Letters, vol. 74, no. 22, pp. 3317–3319, 1999. View at Publisher · View at Google Scholar
  10. Z. Ounaies, C. Park, K. E. Wise, E. J. Siochi, and J. S. Harrison, “Electrical properties of single wall carbon nanotube reinforced polyimide composites,” Composites Science and Technology, vol. 63, no. 11, pp. 1637–1646, 2003. View at Publisher · View at Google Scholar
  11. J. Sandler, M. S. P. Shaffer, T. Prasse, W. Bauhofer, K. Schulte, and A. H. Windle, “Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties,” Polymer, vol. 40, no. 21, pp. 5967–5971, 1999. View at Publisher · View at Google Scholar
  12. S. J. Park, S. T. Lim, M. S. Cho, H. M. Kim, J. Joo, and H. J. Choi, “Electrical properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite,” Current Applied Physics, vol. 5, no. 4, pp. 302–304, 2005. View at Publisher · View at Google Scholar
  13. T. Kashiwagi, E. Grulke, J. Hilding et al., “Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites,” Polymer, vol. 45, no. 12, pp. 4227–4239, 2004. View at Publisher · View at Google Scholar
  14. S. Peeterbroeck, M. Alexandre, J. B. Nagy et al., “Polymer-layered silicate-carbon nanotube nanocomposites: unique nanofiller synergistic effect,” Composites Science and Technology, vol. 64, no. 15, pp. 2317–2323, 2004. View at Publisher · View at Google Scholar
  15. W. H. Liao and K. W. Wang, “On the analysis of viscoelastic materials for active constrained layer damping treatments,” Journal of Sound and Vibration, vol. 207, no. 3, pp. 319–334, 1997. View at Publisher · View at Google Scholar
  16. H. Kishi, M. Kuwata, S. Matsuda, T. Asami, and A. Murakami, “Damping properties of thermoplastic-elastomer interleaved carbon fiber-reinforced epoxy composites,” Composites Science and Technology, vol. 64, no. 16, pp. 2517–2523, 2004. View at Publisher · View at Google Scholar
  17. W. Pulliam, D. Lee, G. Carman, and G. McKnight, “Thin-layer magnetostrictive composite films for turbomachinery fan blade damping,” in Smart Structures and Materials 2003: Industrial and Commercial Applications of Smart Structures Technologies, vol. 5054 of Proceedings of SPIE - The International Society for Optical Engineering, pp. 360–371, San Diego, Calif, USA, March 2003.
  18. J. Suhr, N. A. Koratkar, P. Keblinski, and P. Ajayan, “Viscoelasticity in carbon nanotube composites,” Nature Materials, vol. 4, no. 2, pp. 134–137, 2005. View at Publisher · View at Google Scholar
  19. N. A. Koratkar, B. Wei, and P. M. Ajayan, “Multifunctional structural reinforcement featuring carbon nanotube films,” Composites Science and Technology, vol. 63, no. 11, pp. 1525–1531, 2003. View at Publisher · View at Google Scholar
  20. N. A. Koratkar, B. Wei, and P. M. Ajayan, “Carbon nanotube films for damping applications,” Advanced Materials, vol. 14, no. 13-14, pp. 997–1000, 2002. View at Google Scholar
  21. J. Gou, B. Minaie, B. Wang, Z. Liang, and C. Zhang, “Computational and experimental study of interfacial bonding of single-walled nanotube reinforced composites,” Computational Materials Science, vol. 31, no. 3-4, pp. 225–236, 2004. View at Google Scholar
  22. Z. Wang, Z. Liang, B. Wang, C. Zhang, and L. Kramer, “Processing and property investigation of single-walled carbon nanotube (SWNT) buckypaper/epoxy resin matrix nanocomposites,” Composites Part A: Applied Science and Manufacturing, vol. 35, no. 10, pp. 1225–1232, 2004. View at Publisher · View at Google Scholar
  23. J. Gou, Z. Liang, and B. Wang, “Experimental design and optimization of dispersion process for single-walled carbon nanotube bucky paper,” International Journal of Nanoscience, vol. 3, no. 3, pp. 293–307, 2004. View at Publisher · View at Google Scholar