Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012 (2012), Article ID 140405, 6 pages
http://dx.doi.org/10.1155/2012/140405
Research Article

Effects of the Nanostructured Fe-V-Nb Modificators on the Microstructure and Mechanical Properties of Si-Mn Steel

School of Materials Science and Engineering, Hebei University of Technology, No.8 Guangrong Road, Hongqiao District, Tianjin 300130, China

Received 20 May 2012; Revised 24 July 2012; Accepted 25 July 2012

Academic Editor: Alireza Khataee

Copyright © 2012 Tiebao Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Ardehali Barani, D. Ponge, and D. Raabe, “Refinement of grain boundary carbides in a Si-Cr spring steel by thermomechanical treatment,” Materials Science and Engineering A, vol. 426, no. 1-2, pp. 194–201, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Fernández, S. Illescas, and J. M. Guilemany, “Effect of microalloying elements on the austenitic grain growth in a low carbon HSLA steel,” Materials Letters, vol. 61, no. 11-12, pp. 2389–2392, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. J. P. Wise, J. Spice, S. G. Davidson, W. E. Heitmann, and G. Krauss, “Influence of short austenitizing times on the fracture behavior of a microalloyed automotive spring steel,” Scripta Materialia, vol. 44, no. 2, pp. 299–304, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Kuziak, T. Bołd, and Y. W. Cheng, “Microstructure control of ferrite-pearlite high strength low alloy steels utilizing microalloying additions,” Journal of Materials Processing Technology, vol. 53, no. 1-2, pp. 255–262, 1995. View at Google Scholar · View at Scopus
  5. A. A. Barani, F. Li, P. Romano, D. Ponge, and D. Raabe, “Design of high-strength steels by microalloying and thermomechanical treatment,” Materials Science and Engineering A, vol. 463, no. 1-2, pp. 138–146, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. J. H. Ai, T. C. Zhao, H. J. Gao, Y. H. Hu, and X. S. Xie, “Effect of controlled rolling and cooling on the microstructure and mechanical properties of 60Si2MnA spring steel rod,” Journal of Materials Processing Technology, vol. 160, no. 3, pp. 390–395, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. C. S. Lee, K. A. Lee, D. M. Li, S. J. Yoo, and W. J. Nam, “Microstructural influence on fatigue properties of a high-strength spring steel,” Materials Science and Engineering A, vol. 241, no. 1-2, pp. 30–37, 1998. View at Google Scholar · View at Scopus
  8. A. Khorsand Zak, W. H. Abd. Majid, W. H. Abd. Majid, Ramin Yousefi, and R. Parvizi, “Synthesis, magnetic properties and X-ray analysis of Zn0. 97X0. 03O nanoparticles(X=Mn, Ni, and Co) using Scherrer and sizeestrain plot methods,” Solid State Sciences, vol. 144, pp. 88–94, 2012. View at Publisher · View at Google Scholar
  9. S. Fank and M. Demirkol, “Effect of microstructure on the hysteresis performance of force transducers using AISI 4340 steel spring material,” Sensors and Actuators A, vol. 126, no. 1, pp. 25–32, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. W. S. Du, R. Cao, Y. J. Yan, Z. L. Tian, Y. Peng, and J. H. Chen, “Fracture behavior of 9% nickel high-strength steel at various temperatures. Part I. Tensile tests,” Materials Science and Engineering A, vol. 486, no. 1-2, pp. 611–625, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Li and F. Ebrahimi, “Tensile behavior of a nanocrystalline Ni-Fe alloy,” Acta Materialia, vol. 54, no. 10, pp. 2877–2886, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Dlouhý and B. Strnadel, “The effect of crack propagation mechanism on the fractal dimension of fracture surfaces in steels,” Engineering Fracture Mechanics, vol. 75, no. 3-4, pp. 726–738, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. K. Kocatepe, M. Cerah, and M. Erdogan, “The tensile fracture behaviour of intercritically annealed and quenched + tempered ferritic ductile iron with dual matrix structure,” Materials and Design, vol. 28, no. 1, pp. 172–181, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Bakkalolu, “Effect of processing parameters on the microstructure and properties of an Nb microalloyed steel,” Materials Letters, vol. 56, no. 3, pp. 200–209, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Garbarz, J. Marcisz, and J. Wojtas, “TEM analysis of fine sulphides dissolution and precipitation in steel,” Materials Chemistry and Physics, vol. 81, no. 2-3, pp. 486–489, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Kammouni, W. Saikaly, M. Dumont, C. Marteau, X. Bano, and A. Charaï, “Effect of the bainitic transformation temperature on retained austenite fraction and stability in Ti microalloyed TRIP steels,” Materials Science and Engineering A, vol. 518, no. 1-2, pp. 89–96, 2009. View at Publisher · View at Google Scholar · View at Scopus