Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 469143, 7 pages
http://dx.doi.org/10.1155/2012/469143
Research Article

Top-Down Processing of N a N b O 3 Nanopowder

1Electronic Ceramics Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia
2Centre of Excellence NAMASTE, Jamova cesta 39, 1000 Ljubljana, Slovenia

Received 23 February 2012; Accepted 5 April 2012

Academic Editor: Sergio J. Mejía-Rosales

Copyright © 2012 Jurij Koruza et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [8 citations]

The following is the list of published articles that have cited the current article.

  • Jurij Koruza, and Barbara Malič, “Initial stage sintering mechanism of NaNbO3 and implications regarding the densification of alkaline niobates,” Journal of the European Ceramic Society, 2014. View at Publisher · View at Google Scholar
  • Jurij Koruza, Tadej Rojac, and Barbara Malič, “Polar Oxide Nanopowders Prepared by Mechanical Treatments,” Handbook of Mechanical Nanostructuring, pp. 641–661, 2015. View at Publisher · View at Google Scholar
  • Barbara Malič, Jurij Koruza, Jitka Hreščak, Janez Bernard, Ke Wang, John Fisher, and Andreja Benčan, “Sintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics,” Materials, vol. 8, no. 12, pp. 8117–8146, 2015. View at Publisher · View at Google Scholar
  • Chaudhuri, Singh, Singh, Chandra, Sumit K. Roy, Kotnala, Singh, and Prasad, “Dielectric and Raman studies of Ba0.06(Na1/2Bi1/2)0.94TiO3-NaNbO3 ceramics,” Materials Science- Poland, vol. 34, no. 2, pp. 437–445, 2016. View at Publisher · View at Google Scholar
  • Eric V. Bukovsky, Brent M. Wyatt, Karlee P. Castro, Olga V. Boltalina, and Steven H. Strauss, “Anaerobic vs. aerobic preparation of silicon nanoparticles by stirred media milling. The effects of dioxygen, milling solvent, and milling time on particle size, surface area, crystallinity, surface/near-surface composition, and reactivity,” RSC Advances, vol. 6, no. 113, pp. 112370–112380, 2016. View at Publisher · View at Google Scholar
  • Katarina Vojisavljević, Susanne Wicker, Inci Can, Andreja Benčan, Nicolae Barsan, and Barbara Malič, “Nanocrystalline cobalt-oxide powders by solution-combustion synthesis and their application in chemical sensors,” Advanced Powder Technology, vol. 28, no. 4, pp. 1118–1128, 2017. View at Publisher · View at Google Scholar
  • Jurij Koruza, Pedro Groszewicz, Hergen Breitzke, Gerd Buntkowsky, Tadej Rojac, and Barbara Malič, “Grain-size-induced ferroelectricity in NaNbO3,” Acta Materialia, vol. 126, pp. 77–85, 2017. View at Publisher · View at Google Scholar
  • Tokeer Ahmad, Umar Farooq, and Ruby Phul, “Fabrication and Photocatalytic Applications of Perovskite Materials with Special Emphasis on Alkali Metal based Niobates and Tantalates,” Industrial & Engineering Chemistry Research, 2017. View at Publisher · View at Google Scholar