Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 670531, 8 pages
http://dx.doi.org/10.1155/2012/670531
Research Article

Nanocomposites Based on Technical Polymers and Sterically Functionalized Soft Magnetic Magnetite Nanoparticles: Synthesis, Processing, and Characterization

1Institute of Polymer Materials and Plastics Engineering, Clausthal University of Technology, 38678 Clausthal-Zellerfeld, Germany
2Institute of Mechanical Process Engineering and Minerals Processing, TU Bergakademie Freiberg, 09599 Freiberg, Germany

Received 19 January 2012; Accepted 6 March 2012

Academic Editor: Sevan P. Davtyan

Copyright © 2012 S. Kirchberg et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Sarasa, M. Bosse, D. Gerling, G. Ziegmann, and G. Kastinger, “Plastic moulded soft magnetic materials for electrical machines,” in Proceedings of the Low Voltage Electrical Machines Conference, Brünn, Czech Republic, 2004.
  2. B. O. Park, K. H. Song, B. J. Park, and H. J. Choi, “Miniemulsion fabricated Fe3O4 /poly (methyl methacrylate) composite particles and their magnetorheological characteristics,” Journal of Applied Physics, vol. 107, no. 9, Article ID 09A506, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. B. J. Park, F. F. Fang, and H. J. Choi, “Magnetorheology: materials and application,” Soft Matter, vol. 6, no. 21, pp. 5246–5253, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. C. G. Goetzel, Treatise on Powder Metallurgy: Applied and Physical Powder Metallurgy, vol. 2, Interscience Publishers, New York, NY, USA, 1950.
  5. A. C. Balazs, T. Emrick, and T. P. Russell, “Nanoparticle polymer composites: where two small worlds meet,” Science, vol. 314, no. 5802, pp. 1107–1110, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. A. S. Teja and P. Y. Koh, “Synthesis, properties, and applications of magnetic iron oxide nanoparticles,” Progress in Crystal Growth and Characterization of Materials, vol. 55, no. 1-2, pp. 22–45, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. P. A. Dresco, V. S. Zaitsev, R. J. Gambino, and B. Chu, “Preparation and properties of magnetite and polymer magnetite nanoparticles,” Langmuir, vol. 15, no. 6, pp. 1945–1951, 1999. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Machunsky, P. Grimm, H. J. Schmid, and U. A. Peuker, “Liquid-liquid phase transfer of magnetite nanoparticles,” Colloids and Surfaces A, vol. 348, no. 1–3, pp. 186–190, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. R. H. Baughman, A. A. Zakhidov, and W. A. De Heer, “Carbon nanotubes—the route toward applications,” Science, vol. 297, no. 5582, pp. 787–792, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. J. H. Koo, Polymer Nanocomposites. Processing, Characterization, and Applications, McGraw-Hill Nanoscience and Technology Series, McGraw-Hill, New York, NY, USA, 2006.
  11. U. Wagenknecht, B. Kretzschmar, P. Pötschke et al., “Polymere Nanokomposite mit anorganischen Funktionsfüllstoffen,” Chemie-Ingenieur-Technik, vol. 80, no. 11, pp. 1683–1699, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. P. M. Ajayan, L. S. Schadler, and P. V. Braun, Nanocomposite Science and Technology, Wiley-VCH, Weinheim, Germany, 2003.
  13. S. Breitung-Faes and A. Kwade, “Nano particle production in high-power-density mills,” Chemical Engineering Research and Design, vol. 86, no. 4, pp. 390–394, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. G. Broza, M. Kwiatkowska, Z. Rosłaniec, and K. Schulte, “Processing and assessment of poly(butylene terephthalate) nanocomposites reinforced with oxidized single wall carbon nanotubes,” Polymer, vol. 46, no. 16, pp. 5860–5867, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. X. D. Zhou and H. C. Gu, “Synthesis of PMMA-ceramics nanocomposites by spray process,” Journal of Materials Science Letters, vol. 21, no. 7, pp. 577–580, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Pötschke, M. Abdel-Goad, I. Alig, S. Dudkin, and D. Lellinger, “Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites,” Polymer, vol. 45, no. 26, pp. 8863–8870, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. P. Pötschke, S. M. Dudkin, and I. Alig, “Dielectric spectroscopy on melt processed polycarbonate—multiwalled carbon nanotube composites,” Polymer, vol. 44, no. 17, pp. 5023–5030, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Banert and U. A. Peuker, “Preparation of highly filled super-paramagnetic PMMA-magnetite nano composites using the solution method,” Journal of Materials Science, vol. 41, no. 10, pp. 3051–3056, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Kirchberg and G. Ziegmann, “Thermogravimetry and dynamic mechanical analysis of iron silicon particle filled polypropylene,” Journal of Composite Materials, vol. 43, no. 12, pp. 1323–1334, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Kirchberg, Einfluss von Füllgrad und Geometrie weichmagnetischer Partikel auf das Verarbeitungs- und Materialverhalten ausgewählter Thermoplaste, Papierflieger, Clausthal-Zellerfeld, Germany, 2009.
  21. M. Rudolph, U. A. Peuker, S. Kirchberg, C. Turan, and G. Ziegmann, “Synthesis of highly filled nanomagnetite polymeric composites via sterically stabilized organosols and the spray drying process,” Chemie Ingenieur Technik, vol. 8, no. 8, pp. 774–780, 2009. View at Google Scholar
  22. M. Rudolph and U. A. Peuker, “Coagulation and stabilization of sterically functionalized magnetite nanoparticles in an organic solvent with different technical polymers,” Journal of Colloid and Interface Science, vol. 357, no. 2, pp. 292–299, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Rudolph, J. Erler, and U. A. Peuker, “A TGA–FTIR perspective of fatty acid adsorbed on magnetite nanoparticles—decomposition steps and magnetite reduction,” Colloids and Surfaces A, vol. 397, pp. 16–23, 2012. View at Google Scholar
  24. M. Pott-Langemeyer, W. Riehemann, and W. Heye, “Magnetic properties of meltspun Fe-Si-Al ribbons,” Anales de Fisica B, vol. 86, pp. 232–234, 1990. View at Google Scholar
  25. D. Ramin and W. Riehemann, “Automatic Measurement of the Magnetic Properties of Extreme Soft Magnetic Ferromagnetic Materials,” Technisches Messen, vol. 68, no. 3, pp. 116–125, 2001. View at Google Scholar · View at Scopus
  26. M. Heckele and W. K. Schomburg, “Review on micro molding of thermoplastic polymers,” Journal of Micromechanics and Microengineering, vol. 14, no. 3, pp. R1–R14, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Rudolph, C. Turan, S. Kirchberg, G. Ziegmann, and U. A. Peuker, “Nanoparticles in Organic Solvents With Polymers – Stability and Consequences upon Material Synthesis Through Spray Drying and Melt Moulding,” in Nanoformulation. Special Publications, G. Tiddy and R. B. H. Tan, Eds., Royal Society of Chemistry, Cambridge, UK, 2012. View at Google Scholar
  28. G. Herzer, “Nanocrystalline soft magnetic alloys,” in Handbook of Magnetic Materials, vol. 10, pp. 417–462, North Holland, 1997. View at Google Scholar