Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 839317, 6 pages
http://dx.doi.org/10.1155/2012/839317
Research Article

Comparison between the Needle and Roller Electrospinning of Polyvinylbutyral

Department of Nonwovens, Faculty of Textile Engineering, Technical University of Liberec, Studentska 2, 46117 Liberec, Czech Republic

Received 13 December 2011; Revised 30 January 2012; Accepted 16 February 2012

Academic Editor: Tong Lin

Copyright © 2012 F. Yener and O. Jirsak. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [34 citations]

The following is the list of published articles that have cited the current article.

  • Michael P. Roman, Nagarajan M. Thoppey, Russell E. Gorga, Jason R. Bochinski, and Laura I. Clarke, “Maximizing Spontaneous Jet Density and Nanofiber Quality in Unconfined Electrospinning: The Role of Interjet Interactions,” Macromolecules, vol. 46, no. 18, pp. 7352–7362, 2013. View at Publisher · View at Google Scholar
  • Funda CENGİZ ÇAllioğlu, “Silindirli Elektro Lif Çekim Yöntemi ile Nano Lif Üretimi,” Tekstil ve Mühendis, vol. 20, no. 91, pp. 35–49, 2013. View at Publisher · View at Google Scholar
  • Mohammad A. Alamein, Qin Liu, Sebastien Stephens, Stuart Skabo, Frauke Warnke, Robert Bourke, Peter Heiner, and Patrick H. Warnke, “Nanospiderwebs: Artificial 3D Extracellular Matrix from Nanofibers by Novel Clinical Grade Electrospinning for Stem Cell Delivery,” Advanced Healthcare Materials, vol. 2, no. 5, pp. 702–717, 2013. View at Publisher · View at Google Scholar
  • Mehmet Dayik, Oldrich Jirsak, and Funda Cengiz-Callioglu, “The Influence of Non-Solvent Addition on the Independent and Dependent Parameters in Roller Electrospinning of Polyurethane,” Journal Of Nanoscience And Nanotechnology, vol. 13, no. 7, pp. 4727–4735, 2013. View at Publisher · View at Google Scholar
  • Petra Peer, Martin Stenicka, Vladimir Pavlinek, and Petr Filip, “The storage stability of polyvinylbutyral solutions from an electrospinnability standpoint,” Polymer Degradation and Stability, 2014. View at Publisher · View at Google Scholar
  • Baicheng Weng, Fenghua Xu, Alfonso Salinas, and Karen Lozano, “Mass Production of Carbon Nanotube reinforced Poly(methyl methacrylate) Nonwoven Nanofiber Mats,” Carbon, 2014. View at Publisher · View at Google Scholar
  • Baicheng Weng, Fenghua Xu, George Garza, Mataz Alcoutlabi, Alfonso Salinas, and Karen Lozano, “The production of carbon nanotube reinforced poly(vinyl) butyral nanofibers by the Forcespinning® method,” Polymer Engineering & Science, 2014. View at Publisher · View at Google Scholar
  • Gibin George, and S. Anandhan, “Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics,” RSC Adv., vol. 4, no. 107, pp. 62009–62020, 2014. View at Publisher · View at Google Scholar
  • N. M. Thoppey, R. E. Gorga, L. I. Clarke, and J. R. Bochinski, “Control of the electric field-polymer solution interaction by utilizing ultra-conductive fluids,” Polymer, vol. 55, no. 24, pp. 6390–6398, 2014. View at Publisher · View at Google Scholar
  • Gibin George, and Srinivasan Anandhana, “Glass fiber-supported NiO nanofiber webs for reduction of CO and hydrocarbon emissions from diesel engine exhaust,” Journal of Materials Research, vol. 29, no. 20, pp. 2451–2465, 2014. View at Publisher · View at Google Scholar
  • Baturalp Yalcinkaya, Funda Cengiz Callioglu, and Fatma Yener, “Measurement and analysis of jet current and jet life in roller electrospinning of polyurethane,” Textile Research Journal, vol. 84, no. 16, pp. 1720–1728, 2014. View at Publisher · View at Google Scholar
  • Farah Ejaz Ahmed, Boor Singh Lalia, and Raed Hashaikeh, “A review on electrospinning for membrane fabrication: Challenges and applications,” Desalination, 2014. View at Publisher · View at Google Scholar
  • Yongkang Bai, Yu Chen, Qihua Wang, and Tingmei Wang, “Poly(vinyl butyral) based polymer networks with dual-responsive shape memory and self-healing properties,” Journal of Materials Chemistry A, vol. 2, no. 24, pp. 9169–9177, 2014. View at Publisher · View at Google Scholar
  • Nongnut Sasithorn, and Lenka Martinová, “Fabrication of Silk Nanofibres with Needle and Roller Electrospinning Methods,” Journal of Nanomaterials, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Pavla Čapková, Antonín Čajka, Zdenka Kolská, Martin Kormunda, Jaroslav Pavlík, Marcela Munzarová, Milan Dopita, and David Rafaja, “Phase composition and surface properties of nylon-6 nanofibers prepared by nanospider technology at various electrode distances,” Journal of Polymer Research, vol. 22, no. 6, 2015. View at Publisher · View at Google Scholar
  • Jonas Sidaravicius, Ringaudas Rinkūnas, Tadeus Lozovski, Isto Heiskanen, and Kaj Backfolk, “The influence of solution parameters on the electrospinning intensity from foamed surface,” Journal of Applied Polymer Science, 2015. View at Publisher · View at Google Scholar
  • Luke Burke, Amir Keshvari, Nidal Hilal, and Chris Wright, “Electrospinning: A Practical Approach for Membrane Fabrication,” Membrane Fabrication, pp. 45–74, 2015. View at Publisher · View at Google Scholar
  • Deng-Guang Yu, Chen Yang, Miao Jin, Gareth R. Williams, Hua Zou, Xia Wang, and SWAnnie Bligh, “Medicated Janus fibers fabricated using a Teflon-coated side-by-side spinneret,” Colloids and Surfaces B: Biointerfaces, 2015. View at Publisher · View at Google Scholar
  • Fatma Yalcinkaya, Baturalp Yalcinkaya, and Oldrich Jirsak, “Analysis of the effects of rotating roller speed on a roller electrospinning system,” Textile Research Journal, vol. 87, no. 8, pp. 913–928, 2016. View at Publisher · View at Google Scholar
  • Erika Mudra, Helena Brunckova, Magdalena Streckova, Tibor Sopcak, Martin Sebek, Juraj Durisin, Vladimir Girman, and Jan Dusza, “Preparation and characterization of ceramic nanofibers based on lanthanum tantalates,” Journal of Sol-Gel Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Balakrishnamurthy Sachin Kumar, Alankaru Narayana Prakrthi, Thangaraj Senthil, Kuruveri Udaya Bhat, and Srinivasan Anandhan, “Organoclay enabled nanofiber formation from a polyolefin elastomer,” Advances in Polymer Technology, 2016. View at Publisher · View at Google Scholar
  • Fatma Yalcinkaya, “Experimental study on electrospun polyvinyl butyral nanofibers using a non-solvent system,” Fibers and Polymers, vol. 16, no. 12, pp. 2544–2551, 2016. View at Publisher · View at Google Scholar
  • Fatma Yalcinkaya, Baturalp Yalcinkaya, Adam Pazourek, Jana Mullerova, Martin Stuchlik, and Jiri Maryska, “Surface Modification of Electrospun PVDF/PAN Nanofibrous Layers by Low Vacuum Plasma Treatment,” International Journal of Polymer Science, vol. 2016, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Fatma Yalcinkaya, Michal Komarek, Daniela Lubasova, Filip Sanetrnik, and Jiri Maryska, “Preparation of Antibacterial Nanofibre/Nanoparticle Covered Composite Yarns,” Journal of Nanomaterials, vol. 2016, pp. 1–7, 2016. View at Publisher · View at Google Scholar
  • T. Jiříček, M. Komárek, J. Chaloupek, and T. Lederer, “Flux Enhancement in Membrane Distillation Using Nanofiber Membranes,” Journal of Nanomaterials, vol. 2016, pp. 1–7, 2016. View at Publisher · View at Google Scholar
  • Ramprasath Ramakrishnan, Jolius Gimbun, Natarajan Gajendran, Denisa Stranska, Fahmi Samsuri, Vigneswaran Narayanamurthy, Yamini Sudha Lakshmi, and Balu Ranganathan, “Needleless electrospinning technology - An entrepreneurial perspective,” Indian Journal of Science and Technology, vol. 9, no. 15, 2016. View at Publisher · View at Google Scholar
  • Jae Won Yoon, Yaewon Park, Jooyoun Kim, and Chung Hee Park, “Multi-jet electrospinning of polystyrene/polyamide 6 blend: thermal and mechanical properties,” Fashion and Textiles, vol. 4, no. 1, 2017. View at Publisher · View at Google Scholar
  • Deborah S. LeCorre-Bordes, Peter Jaksons, and Kathleen Hofman, “Mind the gap: Ensuring laboratory-scale testing of an electrospinning product meets commercial-scale needs,” Journal of Applied Polymer Science, vol. 134, no. 20, 2017. View at Publisher · View at Google Scholar
  • Francesca Lionetto, Maria Nicolas Morillas, Silvio Pappadà, Giuseppe Buccoliero, Irene Fernandez Villegas, and Alfonso Maffezzoli, “Hybrid welding of carbon-fiber reinforced epoxy based composites,” Composites Part A: Applied Science and Manufacturing, 2017. View at Publisher · View at Google Scholar
  • Hanna Sofia SalehHudin, Edzrol Niza Mohamad, Wan Nur Liza Mahadi, and Amalina Muhammad Afifi, “Multiple-jet electrospinning methods for nanofibre processing: A review,” Materials and Manufacturing Processes, 2017. View at Publisher · View at Google Scholar
  • Zhao, Guocheng Zhu, Zhu, Deng, and Chen, “Effect of Experimental Parameters on Nanofiber Diameter from Electrospinning with Wire Electrodes,” IOP Conference Series: Materials Science and Engineering, vol. 230, no. 1, 2017. View at Publisher · View at Google Scholar
  • Tara D. Sutherland, Trevor D. Rapson, Mickey G. Huson, and Jeffrey S. Church, “Recombinant Structural Proteins and Their Use in Future Materials,” Fibrous Proteins: Structures and Mechanisms, vol. 82, pp. 491–526, 2017. View at Publisher · View at Google Scholar
  • Jiříček, Komárek, and Lederer, “Polyurethane Nanofiber Membranes for Waste Water Treatment by Membrane Distillation,” Journal of Nanotechnology, vol. 2017, 2017. View at Publisher · View at Google Scholar
  • Ibrahim Alghoraibi, and Sandy Alomari, “Different Methods for Nanofiber Design and Fabrication,” Handbook of Nanofibers, pp. 1–46, 2018. View at Publisher · View at Google Scholar