Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 895131, 8 pages
http://dx.doi.org/10.1155/2012/895131
Research Article

Elastic Modulus Determination of Al-Cu Film Alloys Prepared by Thermal Diffusion

1Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados del IPN Unidad-Mérida, A.P. 73-Cordemex, 97310 Mérida, YUC, Mexico
2Materiales Nanoestructurados, Centro de Investigación en Materiales Avanzados, S.C., Avenida Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, CHIH, Mexico
3Unidad de Materiales, Centro de Investigación Científica de Yucatán A.C., Calle 43 No. 130 Col. Chuburná de Hidalgo, 97200 Mérida, YUC, Mexico

Received 8 May 2012; Accepted 19 June 2012

Academic Editor: Hamed Bahmanpour

Copyright © 2012 E. Huerta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Oliva, and Lugo, “The physical properties of nanomaterials: A challenge in materials science,” 2015 12th International Conference on Electrical Engineering, Computing Science and Automatic Control, CCE 2015, 2015. View at Publisher · View at Google Scholar
  • Ieva Antanavičiūtė, Linas Šimatonis, Orestas Ulčinas, Aušra Gadeikytė, Brigita Abakevičienė, Sigitas Tamulevičius, Valeryia Mikalayeva, Vytenis Arvydas Skeberdis, Edgaras Stankevičius, and Tomas Tamulevičius, “Femtosecond laser micro-machined polyimide films for cell scaffold applications,” Journal of Tissue Engineering and Regenerative Medicine, 2017. View at Publisher · View at Google Scholar
  • Siliang Yin, Wei Zhu, Yuan Deng, Yuncheng Peng, Shengfei Shen, and Yubin Tu, “Enhanced electrical conductivity and reliability for flexible copper thin-film electrode by introducing aluminum buffer layer,” Materials & Design, vol. 116, pp. 524–530, 2017. View at Publisher · View at Google Scholar
  • Sadeem Abbas Fadhil, Mohsen A Hassan, A S M A Haseeb, Harith I Jaafar, Ekram Atta Al-Ajaj, Aoday Hashim Alrawi, and Ibrahem Maher, “Manufacturing of porous aluminum 2024 alloy samples with impressive compression properties,” Materials Research Express, vol. 6, no. 7, pp. 076509, 2019. View at Publisher · View at Google Scholar
  • Miao Zhang, Lei Xiang, Massimiliano Galluzzi, Chunlei Jiang, Shanqing Zhang, Jiangyu Li, and Yongbing Tang, “Uniform Distribution of Alloying/Dealloying Stress for High Structural Stability of an Al Anode in High‐Areal‐Density Lithium‐Ion Batteries,” Advanced Materials, pp. 1900826, 2019. View at Publisher · View at Google Scholar