Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 930763, 5 pages
http://dx.doi.org/10.1155/2012/930763
Research Article

Characterization of Orthorhombic α-MoO3 Microplates Produced by a Microwave Plasma Process

1Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand
2Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand
3Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand

Received 1 October 2011; Accepted 8 November 2011

Academic Editor: William W. Yu

Copyright © 2012 Arrak Klinbumrung et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [47 citations]

The following is the list of published articles that have cited the current article.

  • Ioannis Kostis, Nicolaos Vourdas, Georgios Papadimitropoulos, Antonios Douvas, Maria Vasilopoulou, Nikolaos Boukos, and Dimitris Davazoglou, “Effect of the Oxygen Sub-Stoichiometry and of Hydrogen Insertion on the Formation of Intermediate Bands within the Gap of Disordered Molybdenum Oxide Films,” Journal of Physical Chemistry C, vol. 117, no. 35, pp. 18013–18020, 2013. View at Publisher · View at Google Scholar
  • Faryal Idrees, Jianhua Hou, Faheem K. Butt, Imran Aslam, Tariq Mahmood, Zulfiqar Ali, Chuanbao Cao, Muhammad Tahir, and M. Tanveer, “Facile synthesis of novel Nb3O7F nanoflowers, their optical and photocatalytic properties,” Crystengcomm, vol. 15, no. 40, pp. 8146–8152, 2013. View at Publisher · View at Google Scholar
  • Rabindar K. Sharma, and G. B. Reddy, “Controlled growth of vertically aligned MoO3 nanoflakes by plasma assisted paste sublimation process,” Journal of Applied Physics, vol. 114, no. 18, pp. 184310, 2013. View at Publisher · View at Google Scholar
  • Pannipa Wongkrua, Titipun Thongtem, and Somchai Thongtem, “Synthesis of h- and α-MoO3 by Refluxing and Calcination Combination: Phase and Morphology Transformation, Photocatalysis, and Photosensitization,” Journal of Nanomaterials, vol. 2013, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  • Jyoti Rani, Piyush Kumar Patel, Nidhi Adhlakha, Hemant Singh, K.L. Yadav, and Satya Prakash, “Mo6+ Modified (K0.5Na0.5)NbO3 Lead Free Ceramics: Structural, Electrical and Optical Properties,” Journal of Materials Science & Technology, vol. 30, no. 5, pp. 459–465, 2014. View at Publisher · View at Google Scholar
  • Phuriwat Jittiarporn, Lek Sikong, Kalayanee Kooptarnond, and Wirach Taweepreda, “Effects of Precipitation Temperature on the Photochromic Properties of h-MoO3,” Ceramics International, 2014. View at Publisher · View at Google Scholar
  • Damien Hanlon, Claudia Backes, Thomas M. Higgins, Marguerite Hughes, Arlene O’Neill, Paul King, Niall McEvoy, Georg S. Duesberg, Beatriz Mendoza Sanchez, Henrik Pettersson, Valeria Nicolosi, and Jonathan N. Coleman, “Production of Molybdenum Trioxide Nanosheets by Liquid Exfoliation and Their Application in High-Performance Supercapacitors,” Chemistry of Materials, pp. 140213071119008, 2014. View at Publisher · View at Google Scholar
  • Rabindar K. Sharma, and G. B. Reddy, “Synthesis and characterization of alpha-MoO3 microspheres packed with nanoflakes,” Journal of Physics D-Applied Physics, vol. 47, no. 6, 2014. View at Publisher · View at Google Scholar
  • Zhang Zhang, Ruoyan Yang, Yanshan Gao, Yufei Zhao, Junyang Wang, Liang Huang, Jiang Guo, Tuantuan Zhou, Peng Lu, Zhanhu Guo, and Qiang Wang, “Novel Na2Mo4O13/alpha-MoO3 hybrid material as highly efficient CWAO catalyst for dye degradation at ambient conditions,” Scientific Reports, vol. 4, 2014. View at Publisher · View at Google Scholar
  • Gi Dae Park, Seung Ho Choi, and Yun Chan Kang, “Electrochemical properties of ultrafine TiO2-doped MoO3 nanoplates prepared by one-pot flame spray pyrolysis,” Rsc Advances, vol. 4, no. 33, pp. 17382–17386, 2014. View at Publisher · View at Google Scholar
  • Prakash Chandra, Dhananjay S. Doke, Shubhangi B. Umbarkar, and Ankush V. Biradar, “One-pot synthesis of ultrasmall MoO3 nanoparticles supported on SiO2, TiO2, and ZrO2 nanospheres: an efficient epoxidation catalyst,” Journal of Materials Chemistry A, vol. 2, no. 44, pp. 19060–19066, 2014. View at Publisher · View at Google Scholar
  • Cristina I. Fernandes, Silvia C. Capelli, Pedro D. Vaz, and Carla D. Nunes, “Highly selective and recyclable MoO3 nanoparticles in epoxidation catalysis,” Applied Catalysis A: General, 2015. View at Publisher · View at Google Scholar
  • S. Vidya, Sam Solomon, and J. K. Thomas, “Synthesis and characterisation of MoO3 and WO3 nanorods for low temperature co-fired ceramic and optical applications,” Journal of Materials Science: Materials in Electronics, vol. 26, no. 5, pp. 3243–3255, 2015. View at Publisher · View at Google Scholar
  • Martin Sustek, Blazej Horvath, Ivo Vavra, Miroslav Gal, Edmund Dobrocka, and Milan Hronec, “Effects of structures of molybdenum catalysts on selectivity in gas-phase propylene oxidation,” Chinese Journal Of Catalysis, vol. 36, no. 11, pp. 1900–1909, 2015. View at Publisher · View at Google Scholar
  • A. H. Reshak, “Specific features of electronic structures and optical susceptibilities of molybdenum oxide,” Rsc Advances, vol. 5, no. 28, pp. 22044–22052, 2015. View at Publisher · View at Google Scholar
  • Jerina Majeed, C. Nayak, S. N. Jha, Kaustava Bhattacharyya, D. Bhattacharyya, and A. K. Tripathi, “Correlation of Mo dopant and photocatalytic properties of Mo incorporated TiO2: an EXAFS and photocatalytic study,” RSC Advances, vol. 5, no. 110, pp. 90932–90940, 2015. View at Publisher · View at Google Scholar
  • Sai Jin Xiao, Xiao Jing Zhao, Ping Ping Hu, Zhao Jun Chu, Cheng Zhi Huang, and Li Zhang, “Highly Photoluminescent Molybdenum Oxide Quantum Dots: One-Pot Synthesis and Application in 2,4,6-Trinitrotoluene Determination,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • M. Balaji, J. Chandrasekaran, and M. Raja, “Role of substrate temperature on MoO3 thin films by the JNS pyrolysis technique for P–N junction diode application,” Materials Science in Semiconductor Processing, vol. 43, pp. 104–113, 2016. View at Publisher · View at Google Scholar
  • Mohamad Kassem, “Investigation of structural and textural properties of Ge x MoO3 system, promising catalyst for photocatalytic applications,” Kinetics and Catalysis, vol. 57, no. 1, pp. 26–31, 2016. View at Publisher · View at Google Scholar
  • M Sendova-Vassileva, Hr Dikov, P Vitanov, G Popkirov, R Gergova, G Grancharov, and V Gancheva, “Magnetron Sputtered Molybdenum Oxide for Application in Polymers Solar Cells,” Journal of Physics: Conference Series, vol. 764, pp. 012022, 2016. View at Publisher · View at Google Scholar
  • Denis V. Leybo, Anar N. Baiguzhina, Dmitry S. Muratov, Dmitry I. Arkhipov, Evgeny A. Kolesnikov, Vera V. Levina, Natalia I. Kosova, and Denis V. Kuznetsov, “Effects of composition and production route on structure and catalytic activity for ammonia decomposition reaction of ternary Ni–Mo nitride catalysts,” International Journal of Hydrogen Energy, 2016. View at Publisher · View at Google Scholar
  • Kapnisti, Noli, Arvanitidis, and Hatzidimitriou, “Thermally modified molybdenum oxide as a potential sorbent for the removal of metal cations from aqueous solutions,” Journal of Radioanalytical and Nuclear Chemistry, vol. 307, no. 1, pp. 555–565, 2016. View at Publisher · View at Google Scholar
  • Rabindar K. Sharma, Sujit K. Saini, Prabhat Kumar, Megha Singh, G. B. Reddy, Rabindar K. Sharma, Sujit K. Saini, Prabhat Kumar, Megha Singh, and G. B. Reddy, “Plasma Assisted Growth of MoO3 Films on Different Substrate Locations Relative to Sublimation Source,” International Conference On Condensed Matter And Applied Physics (Icc 2015), vol. 1728, 2016. View at Publisher · View at Google Scholar
  • Young Eun Bae, Sang Hwa Lee, Jae Ryeol Jeong, and Min Hyung Lee, “ Morphology-Dependent Catalytic Performance of MoS 2 /MoO x Heterojunction Nanostructures for Hydrogen Evolution Reaction ,” Bulletin of the Korean Chemical Society, 2017. View at Publisher · View at Google Scholar
  • Vijaya Jadkar, Amit Pawbake, Ravindra Waykar, Ashok Jadhavar, Azam Mayabadi, Abhijit Date, Dattatray Late, Habib Pathan, Suresh Gosavi, and Sandesh Jadkar, “Synthesis of orthorhombic-molybdenum trioxide (α-MoO3) thin films by hot wire-CVD and investigations of its humidity sensing properties,” Journal of Materials Science: Materials in Electronics, 2017. View at Publisher · View at Google Scholar
  • Murugan Veerapandian, Pramod K. Avti, and V. Ravichandiran, “Ruthenium bipyridine sensitized MoO 3 multifunctional nanostructures: Study of opto-electrochemical properties, biocompatibility and bioimaging,” Colloids and Surfaces B: Biointerfaces, vol. 154, pp. 315–320, 2017. View at Publisher · View at Google Scholar
  • Olena Sachuk, Natalya Kopachevska, Lubov Kuznetsova, Valery Zazhigalov, and Volodymyr Starchevskyy, “INFLUENCE OF ULTRASONIC TREATMENT ON PROPERTIES OF ZnO-MoO3 OXIDE SYSTEM,” Chemistry & Chemical Technology, vol. 11, no. 2, pp. 152–157, 2017. View at Publisher · View at Google Scholar
  • Emanuela Filippo, Francesca Baldassarre, Marco Tepore, Maria Rachele Guascito, Daniela Chirizzi, and Antonio Tepore, “ Characterization of hierarchical α -MoO 3 plates toward resistive heating synthesis: electrochemical activity of α -MoO 3 /Pt modified electrode toward methanol oxidation at neutral pH ,” Nanotechnology, vol. 28, no. 21, pp. 215601, 2017. View at Publisher · View at Google Scholar
  • Anukorn Phuruangrat, Suchada Thipkonglas, Titipun Thongtem, and Somchai Thongtem, “Hydrothermal synthesis and characterization of Dy-doped MoO 3 nanobelts for using as a visible-light-driven photocatalyst,” Materials Letters, vol. 195, pp. 37–40, 2017. View at Publisher · View at Google Scholar
  • Pragnya P. Mishra, and Rabi N. Panda, “Novel synthesis, characterization and magnetic properties of nano-structured γ-Mo2N and γ-Co0.25Mo1.75N nitrides,” Materials Research Bulletin, vol. 86, pp. 241–247, 2017. View at Publisher · View at Google Scholar
  • M. A. Arvizu, M. Morales-Luna, M. Pérez-González, E. Campos-Gonzalez, O. Zelaya-Angel, and S. A. Tomás, “Influence of Thermal Annealings in Argon on the Structural and Thermochromic Properties of $$\mathrm{MoO}_{3}$$ MoO 3 Thin Films,” International Journal of Thermophysics, vol. 38, no. 4, 2017. View at Publisher · View at Google Scholar
  • M. Ranjbar, F. Delalat, and H. Salamati, “Molybdenum oxide nanosheets prepared by an anodizing-exfoliation process and observation of photochromic properties,” Applied Surface Science, vol. 396, pp. 1752–1759, 2017. View at Publisher · View at Google Scholar
  • Hans-Joachim Lunk, and Hans Hartl, “Discovery, properties and applications of molybdenum and its compounds,” ChemTexts, vol. 3, no. 3, 2017. View at Publisher · View at Google Scholar
  • Shaista Ali, and Muhammad Akhyar Farrukh, “ Effect of Calcination Temperature on the Structural, Thermodynamic, and Optical Properties of MoO 3 Nanoparticles ,” Journal of the Chinese Chemical Society, 2017. View at Publisher · View at Google Scholar
  • Aihua Yan, Hui Zhao, Huagen Liang, Qingyu Gao, Yinghuai Qiang, Fei Huang, and Zhen Li, “CNTs-Modified Nb 3 O 7 F Hybrid Nanocrystal towards Faster Carrier Migration, Lower Bandgap and Higher Photocatalytic Activity,” Scientific Reports, vol. 7, 2017. View at Publisher · View at Google Scholar
  • Inbanathan, M. Beaula Ruby Kamalam, and Sethuraman, “Enhanced photo catalytic activity of graphene oxide /MoO3 nanocomposites in the degradation of Victoria Blue Dye under visible light irradiation,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Jasmina Sulejmanović, Elma Šabanović, Sabina Begić, and Mustafa Memić, “Molybdenum(VI) Oxide-Modified Silica Gel as a Novel Sorbent for the Simultaneous Solid-Phase Extraction of Eight Metals with Determination by Flame Atomic Absorption Spectrometry,” Analytical Letters, pp. 1–13, 2018. View at Publisher · View at Google Scholar
  • Pablo Martín-Ramos, Ignacio Fernández-Coppel, Manuel Avella, and Jesús Martín-Gil, “α-MoO3 Crystals with a Multilayer Stack Structure Obtained by Annealing from a Lamellar MoS2/g-C3N4 Nanohybrid,” Nanomaterials, vol. 8, no. 7, pp. 559, 2018. View at Publisher · View at Google Scholar
  • Chenyang Zhao, Youfang Zhang, Lunfeng Chen, Chaoyi Yan, Peixin Zhang, Jia Ming Ang, and Xuehong Lu, “ Self-Assembly-Assisted Facile Synthesis of MoS 2 -Based Hybrid Tubular Nanostructures for Efficient Bifunctional Electrocatalysis ,” ACS Applied Materials & Interfaces, 2018. View at Publisher · View at Google Scholar
  • Nisha Kodan, Aadesh P. Singh, Matthias Vandichel, Björn Wickman, and B.R. Mehta, “Favourable band edge alignment and increased visible light absorption in β -MoO 3 / α -MoO 3 oxide heterojunction for enhanced photoelectrochemical performance,” International Journal of Hydrogen Energy, 2018. View at Publisher · View at Google Scholar
  • Thatiane Veríssimo dos Santos, Débora Olimpio da Silva Avelino, Mario Roberto Meneghetti, and Simoni Margareti Plentz Meneghetti, “Mixed oxides based on SnO 2 impregnated with MoO 3 : A robust system to apply in fructose conversion,” Catalysis Communications, 2018. View at Publisher · View at Google Scholar
  • Sunil Pandey, Krishna Hari Sharma, Amit Kumar Sharma, Yowan Nerthigan, Da-Ren Hang, and Hui-Fen Wu, “Comparative Photothermal Performance among Various Sub-Stoichiometric 2D Oxygen-Deficient Molybdenum Oxide Nanoflakes and In Vivo Toxicity,” Chemistry - A European Journal, 2018. View at Publisher · View at Google Scholar
  • Parvin S. Tamboli, Chaitali V. Jagtap, Vishal S. Kadam, Ravi V. Ingle, Rajiv S. Vhatkar, Smita S. Mahajan, and Habib M. Pathan, “Spray pyrolytic deposition of α-MoO3 film and its use in dye-sensitized solar cell,” Applied Physics A, vol. 124, no. 4, 2018. View at Publisher · View at Google Scholar
  • Yaghoub Pourshojaei, Mohammad-Hossein Jadidi, Khalil Eskandari, Alireza Foroumadi, and Ali Asadipour, “An eco-friendly synthesis of 4-aryl-substituted pyrano-fuzed coumarins as potential pharmacological active heterocycles using molybdenum oxide nanoparticles as an effective and recyclable catalyst,” Research on Chemical Intermediates, 2018. View at Publisher · View at Google Scholar
  • Laura Silvestroni, Kerstin Stricker, Diletta Sciti, and Hans-Joachim Kleebe, “Understanding the oxidation behavior of a ZrB 2 –MoSi 2 composite at ultra-high temperatures,” Acta Materialia, 2018. View at Publisher · View at Google Scholar
  • N. Guru Prakash, M. Dhananjaya, A. Lakshmi Narayana, Dadamiah PMD Shaik, P. Rosaiah, and O.M. Hussain, “High Performance One Dimensional α-MoO 3 Nanorods for Supercapacitor Applications,” Ceramics International, 2018. View at Publisher · View at Google Scholar
  • Pradeesh G., Ponnuswamy V., Gowtham B., Suresh R., and Chandrasekaran J., “Influence of annealing temperature on the properties of molybdenum oxide nanoparticles prepared through chemical precipitation method for p-n junction diode application,” Optik, vol. 175, pp. 217–227, 2018. View at Publisher · View at Google Scholar