Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 123256, 11 pages
http://dx.doi.org/10.1155/2013/123256
Research Article

3D CFD Simulations of MOCVD Synthesis System of Titanium Dioxide Nanoparticles

1Department of Food and Process Engineering, Faculty of Engineering, University Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Department of Chemical and Environmental Engineering, Faculty of Engineering, University Putra Malaysia, 43400 Serdang, Selangor, Malaysia
3Advanced Materials and Nanotechnology Laboratory, Institute of Advanced Technology, University Putra Malaysia, 43400 Serdang, Selangor, Malaysia

Received 7 June 2013; Accepted 2 September 2013

Academic Editor: Huogen Yu

Copyright © 2013 Siti Hajar Othman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Siti Hajar Othman, Suraya Abdul Rashid, Tinia Idaty Mohd. Ghazi, and Norhafizah Abdullah, “ 3D CFD Simulations: Effect of Operation Parameters on the Deposition of Photocatalytic TiO 2 Nanoparticles by MOCVD ,” Chemical Vapor Deposition, 2015. View at Publisher · View at Google Scholar
  • Zhang Deng, Wenjie He, Chenlong Duan, Bin Shan, and Rong Chen, “Atomic layer deposition process optimization by computational fluid dynamics,” Vacuum, vol. 123, pp. 103–110, 2016. View at Publisher · View at Google Scholar
  • Sunil Babu Eadi, Sungjin Kim, Soon Wook Jeong, and Heung Woo Jeon, “ Novel Preparation of Fe Doped TiO 2 Nanoparticles and Their Application for Gas Sensor and Photocatalytic Degradation ,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–6, 2017. View at Publisher · View at Google Scholar