Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 150297, 11 pages
Research Article

Control of FeAl Composition Produced by SPS Reactive Sintering from Mechanically Activated Powder Mixture

1ICB UMR 6303 CNRS/Université de Bourgogne, 9. Avenue A. Savary, BP 47870, 21078 Dijon Cedex, France
2IJL UMR 7198 CNRS/Université de Lorraine, Parc de Saurupt, CS 50840, 54011 Nancy Cedex, France

Received 19 February 2013; Revised 7 April 2013; Accepted 13 June 2013

Academic Editor: Claude Estournès

Copyright © 2013 S. Paris et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • H. Sina, and S. Iyengar, “Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures,” Journal of Thermal Analysis and Calorimetry, 2015. View at Publisher · View at Google Scholar
  • K. Morsi, “Combustion synthesis and the electric field: A review,” International Journal of Self-Propagating High-Temperature Synthesis, vol. 26, no. 3, pp. 199–209, 2017. View at Publisher · View at Google Scholar
  • Dariusz Siemiaszko, and Jakub Kuzia, “The influence of large particles of iron powder on the microstructure and properties of FeAl intermetallic phase,” Intermetallics, vol. 104, pp. 16–23, 2019. View at Publisher · View at Google Scholar