Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 301301, 9 pages
http://dx.doi.org/10.1155/2013/301301
Research Article

Formation of Porous Structure with Subspot Size under the Irradiation of Picosecond Laser Pulses

State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an 710054, China

Received 17 July 2013; Revised 6 September 2013; Accepted 8 September 2013

Academic Editor: Guangyu Zhao

Copyright © 2013 Bin Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [8 citations]

The following is the list of published articles that have cited the current article.

  • Bin Liu, Wenjun Wang, Gedong Jiang, Xuesong Mei, Zibao Wang, Kedian Wang, and Jianlei Cui, “Study on hierarchical structured PDMS for surface super-hydrophobicity using imprinting with ultrafast laser structured models,” Applied Surface Science, 2015. View at Publisher · View at Google Scholar
  • Bin Liu, Gedong Jiang, Wenjun Wang, Xuesong Mei, Kedian Wang, Jianlei Cui, and Jiuhong Wang, “Porous microstructures induced by picosecond laser scanning irradiation on stainless steel surface,” Optics And Lasers In Engineering, vol. 78, pp. 55–63, 2016. View at Publisher · View at Google Scholar
  • Bojan Podgornik, Peter Gregorčič, Marko Sedlaček, and Jürgen Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Applied Surface Science, vol. 387, pp. 698–706, 2016. View at Publisher · View at Google Scholar
  • D. Moskal, J. Martan, M. Kučera, Š. Houdková, and R. Kromer, “Picosecond Laser Surface Cleaning of AM1 Superalloy,” Physics Procedia, vol. 83, pp. 249–257, 2016. View at Publisher · View at Google Scholar
  • Philipp Amend, Tom Häfner, Michael Gränitz, Stephan Roth, and Michael Schmidt, “Effect of ultrashort pulse laser structuring of stainless steel on laser-based heat conduction joining of polyamide steel hybrids,” Physics Procedia, vol. 83, pp. 1130–1136, 2016. View at Publisher · View at Google Scholar
  • Johannes Strauß, Tom Häfner, Michael Dobler, Johannes Heberle, and Michael Schmidt, “Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions,” Physics Procedia, vol. 83, pp. 1160–1169, 2016. View at Publisher · View at Google Scholar
  • Fatema H. Rajab, Zhu Liu, and Lin Li, “Production of Stable Superhydrophilic Surfaces on 316L Steel by Simultaneous Laser Texturing and SiO 2 Deposition,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Fatema H. Rajab, Christopher M. Liauw, Paul S. Benson, Lin Li, and Kathryn A. Whitehead, “Production of hybrid macro/micro/nano surface structures on Ti6Al4V surfaces by picosecond laser surface texturing and their antifouling characteristics,” Colloids and Surfaces B: Biointerfaces, 2017. View at Publisher · View at Google Scholar