Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 301301, 9 pages
http://dx.doi.org/10.1155/2013/301301
Research Article

Formation of Porous Structure with Subspot Size under the Irradiation of Picosecond Laser Pulses

State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an 710054, China

Received 17 July 2013; Revised 6 September 2013; Accepted 8 September 2013

Academic Editor: Guangyu Zhao

Copyright © 2013 Bin Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. N. Chichkov, C. Momma, S. Nolte, F. Von Alvensleben, and A. Tünnermann, “Femtosecond, picosecond and nanosecond laser ablation of solids,” Applied Physics A, vol. 63, no. 2, pp. 109–115, 1997. View at Google Scholar · View at Scopus
  2. W. Wang, X. Mei, and G. Jiang, “Control of microstructure shape and morphology in femtosecond laser ablation of imprint rollers,” International Journal of Advanced Manufacturing Technology, vol. 41, no. 5-6, pp. 504–512, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Ding, J. Shao, X. Li, H. Tian, L. Miao, and H. Liu, “Controllable formation of nanogaps in thin metallic film by rear side irradiation with ultrashort pulsed laser,” Physica E, vol. 44, no. 2, pp. 430–434, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Paivasaari, J. J. J. Kaakkunen, M. Kuittinen, and T. Jaaskelainen, “Enhanced optical absorptance of metals using interferometric femtosecond ablation,” Optics Express, vol. 15, no. 21, pp. 13838–13843, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. W.-Q. Han, L. Wu, R. F. Klie, and Y. Zhu, “Enhanced optical absorption induced by dense nanocavities inside titania nanorods,” Advanced Materials, vol. 19, no. 18, pp. 2525–2529, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. B. Gerbig, S. I.-U. Ahmed, D. G. Chetwynd, and H. Haefke, “Topography-related effects on the lubrication of nanostructured hard surfaces,” Tribology International, vol. 39, no. 9, pp. 945–952, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Bonse, A. Rosenfeld, and J. Krüger, “Implications of transient changes of optical and surface properties of solids during femtosecond laser pulse irradiation to the formation of laser-induced periodic surface structures,” Applied Surface Science, vol. 257, no. 12, pp. 5420–5423, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Borowiec and H. K. Haugen, “Subwavelength ripple formation on the surfaces of compound semiconductors irradiated with femtosecond laser pulses,” Applied Physics Letters, vol. 82, no. 25, pp. 4462–4464, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. G. A. Martsinovskii and G. D. Shandybina, “Ultrashort excita-tions of surface polaritons and waveguide modes in semiconductors,” Optics and Spectroscopy, vol. 105, pp. 67–72, 2008. View at Google Scholar
  10. N. G. Semaltianos, W. Perrie, P. French et al., “Femtosecond laser ablation characteristics of nickel-based superalloy C263,” Applied Physics A, vol. 94, no. 4, pp. 999–1009, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Guillermin, F. Garrelie, N. Sanner, E. Audouard, and H. Soder, “Single- and multi-pulse formation of surface structures under static femtosecond irradiation,” Applied Surface Science, vol. 253, no. 19, pp. 8075–8079, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Rapp and J. Rosenberger, “Pump-probe microscopy investigations on fs-laser ablation of thin Ta2O5/Pt layer systems,” Journal of Applied Physics, vol. 112, Article ID 013110, 2012. View at Google Scholar
  13. P. Fan and M. Zhong, “Rapid fabrication of surface micro/nano structures with enhanced broadband absorption on Cu by picosecond laser,” Optics Express, vol. 21, pp. 11628–11637, 2013. View at Google Scholar
  14. G. Zhao and N. Zhang, “Porous MoO3 films with ultra-short relaxation time used for supercapacitors,” Materials Research Bulletin, vol. 48, no. 3, pp. 1328–1332, 2013. View at Google Scholar
  15. J. M. Liu, “Simple technique for measurements of pulsed Gaussian-beam spot sizes,” Optics Letters, vol. 7, pp. 196–198, 1982. View at Google Scholar
  16. W. Wang, X. Mei, and G. Jiang, “Control of microstructure shape and morphology in femtosecond laser ablation of imprint rollers,” International Journal of Advanced Manufacturing Technology, vol. 41, no. 5-6, pp. 504–512, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Ben-Yakar, A. Harkin, J. Ashmore, R. L. Byer, and H. A. Stone, “Thermal and fluid processes of a thin melt zone during femtosecond laser ablation of glass: the formation of rims by single laser pulses,” Journal of Physics D, vol. 40, no. 5, article 021, pp. 1447–1459, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. P. P. Pronko, S. K. Dutta, D. Du, and R. K. Singh, “Thermophysical effects in laser processing of materials with picosecond and femtosecond pulses,” Journal of Applied Physics, vol. 78, no. 10, pp. 6233–6240, 1995. View at Publisher · View at Google Scholar · View at Scopus
  19. K. H. Leitz and B. Redlingshöfer, “Metal ablation with short and ultrashort laser pulses,” Physics Procedia, vol. 12, pp. 230–238, 2011. View at Google Scholar
  20. K. C. Mills, S. U. Yuchu, L. I. Zushu, and R. F. Brooks, “Equations for the calculation of the thermo-physical properties of stainless steel,” ISIJ International, vol. 44, no. 10, pp. 1661–1668, 2004. View at Google Scholar · View at Scopus
  21. J. Stašic and B. Gakovic, “Superficial changes on the Inconel 600 superalloy by picosecond Nd:YAG laser operating at 1064, 532, and 266 nm: Comparative Study,” Laser and Particle Beams, vol. 30, p. 249, 2012. View at Google Scholar
  22. E. G. Gamaly, A. V. Rode, B. Luther-Davies, and V. T. Tikhonchuk, “Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics,” Physics of Plasmas, vol. 9, no. 3, p. 949, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. C. H. Fan, J. Sun, and J. P. Longtin, “Plasma absorption of femtosecond laser pulses in dielectrics,” Journal of Heat Transfer, vol. 124, no. 2, pp. 275–283, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Fedosejevs and R. Ottmann, “Absorption of femtosecond laser pulses in high-density plasma,” Physical Review Letters, vol. 64, no. 11, pp. 1250–1253, 1990. View at Publisher · View at Google Scholar · View at Scopus
  25. J. König and T. Bauer, Fundamentals and Industrial Applications of Ultrashort Pulsed Lasers at Bosch, Photonics West, San Fransisco, Calif, USA, 2011.
  26. A. Miotello and R. Kelly, “Laser-induced phase explosion: new physical problems when a condensed phase approaches the thermodynamic critical temperature,” Applied Physics A, vol. 69, no. 7, pp. S67–S73, 1999. View at Publisher · View at Google Scholar · View at Scopus
  27. L. M. Cabalin and J. J. Laserna, “Experimental determination of laser induced breakdown thresholds of metals under nanosecond Q-switched laser operation,” Spectrochimica Acta B, vol. 53, no. 5, pp. 723–730, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Momcilovica and J. Limpouch, “Surface modification of copper using high intensity, 1015W/cm2, femtosecond laser in vacuum,” Applied Surface Science, vol. 258, p. 8908, 2012. View at Google Scholar
  29. S. Amoruso, R. Bruzzese, M. Vitiello, N. N. Nedialkov, and P. A. Atanasov, “Experimental and theoretical investigations of femtosecond laser ablation of aluminum in vacuum,” Journal of Applied Physics, vol. 98, no. 4, Article ID 044907, 2005. View at Publisher · View at Google Scholar · View at Scopus