Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 542421, 8 pages
http://dx.doi.org/10.1155/2013/542421
Research Article

Novel Polyvinyl Alcohol/Styrene Butadiene Rubber Latex/Carboxymethyl Cellulose Nanocomposites Reinforced with Modified Halloysite Nanotubes

1Key Laboratory of Advanced Textile Materials and Manufacturing Technology, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, China
2Tianjin Key Laboratory of Pulp & Paper, Tianjin University of Science & Technology, Tianjin 300457, China
3Engineering Research Center for Eco-Dyeing & Finishing of Textiles, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, China

Received 13 May 2013; Accepted 24 September 2013

Academic Editor: John Zhanhu Guo

Copyright © 2013 Yanjun Tang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Lecouvet, J. G. Gutierrez, M. Sclavons, and C. Bailly, “Structure-property relationships in polyamide 12/halloysite nanotube nanocomposites,” Polymer Degradation and Stability, vol. 96, no. 2, pp. 226–235, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Zhao and P. Liu, “Adsorption behavior of methylene blue on halloysite nanotubes,” Microporous and Mesoporous Materials, vol. 112, no. 1–3, pp. 419–424, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. X. M. Sun, Y. Zhang, H. B. Shen, and N. Q. Jia, “Direct electrochemistry and electrocatalysis of horseradish peroxidase based on halloysite nanotubes/chitosan nanocomposite film,” Electrochimica Acta, vol. 56, no. 2, pp. 700–705, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Lin, K. M. Ng, C.-M. Chan, G. Sun, and J. Wu, “High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant,” Journal of Colloid and Interface Science, vol. 358, no. 2, pp. 423–429, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. M. X. Liu, B. C. Guo, M. L. Du, F. Chen, and D. M. Jia, “Halloysite nanotubes as a novel β-nucleating agent for isotactic polypropylene,” Polymer, vol. 50, no. 13, pp. 3022–3030, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Prashantha, H. Schmitt, M. F. Lacrampe, and P. Krawczak, “Mechanical behaviour and essential work of fracture of halloysite nanotubes filled polyamide 6 nanocomposites,” Composites Science and Technology, vol. 71, no. 16, pp. 1859–1866, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. E. E. Ibrahim, D. M. Chipara, R. Thapa, K. Lozano, and M. Chipara, “Raman spectroscopy of isotactic polypropylene-halloysite nanocomposites,” Journal of Nanomaterials, vol. 2012, Article ID 793084, 8 pages, 2012. View at Publisher · View at Google Scholar
  8. S. A. Hashemifard, A. F. Ismail, and T. Matsuura, “Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNTs) as filler for gas separation: morphological diagram,” Chemical Engineering Journal, vol. 172, no. 1, pp. 581–590, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. W. N. Xing, L. Ni, P. W. Huo et al., “Preparation high photocatalytic activity of CdS/halloysite nanotubes (HNTs) nanocomposites with hydrothermal method,” Applied Surface Science, vol. 259, pp. 698–704, 2012. View at Google Scholar
  10. E. Tierrablanca, J. Romero-García, P. Roman, and R. Cruz-Silva, “Biomimetic polymerization of aniline using hematin supported on halloysite nanotubes,” Applied Catalysis A, vol. 381, no. 1-2, pp. 267–273, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. X. Liu, W. D. Li, J. H. Rong, and C. R. Zhou, “Novel polymer nanocomposite hydrogel with natural clay nanotubes,” Colloid and Polymer Science, vol. 290, no. 10, pp. 895–905, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. R. C. Liu, B. Zhang, D. D. Mei, H. Q. Zhang, and J. D. Liu, “Adsorption of methyl violet from aqueous solution by halloysite nanotubes,” Desalination, vol. 268, no. 1–3, pp. 111–116, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. P. Luo, Y. Zhao, B. Zhang, J. Liu, Y. Yang, and J. Liu, “Study on the adsorption of Neutral Red from aqueous solution onto halloysite nanotubes,” Water Research, vol. 44, no. 5, pp. 1489–1497, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Q. Deng, J. N. Zhang, and L. Ye, “Halloysite-epoxy nanocomposites with improved particle dispersion through ball mill homogenisation and chemical treatments,” Composites Science and Technology, vol. 69, no. 14, pp. 2497–2505, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. B. C. Guo, F. Chen, Y. D. Lei, X. L. Liu, J. J. Wan, and D. M. Jia, “Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by sorbic acid,” Applied Surface Science, vol. 255, no. 16, pp. 7329–7336, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. M. X. Liu, Y. Zhang, C. C. Wu, S. Xiong, and C. R. Zhou, “Chitosan/halloysite nanotubes bionanocomposites: structure, mechanical properties and biocompatibility,” International Journal of Biological Macromolecules, vol. 51, no. 4, pp. 566–575, 2012. View at Google Scholar
  17. J. M. Duan, R. C. Liu, T. Chen, B. Zhang, and J. D. Liu, “Halloysite nanotube-Fe3O4 composite for removal of methyl violet from aqueous solutions,” Desalination, vol. 293, pp. 46–52, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. H. Ismail, P. Pasbakhsh, M. N. A. Fauzi, and A. Abu Bakar, “Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites,” Polymer Testing, vol. 27, no. 7, pp. 841–850, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Schmitt, K. Prashantha, J. Soulestin, M. F. Lacrampe, and P. Krawczak, “Preparation and properties of novel melt-blended halloysite nanotubes/wheat starch nanocomposites,” Carbohydrate Polymers, vol. 89, no. 3, pp. 920–927, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. P. Rybiński and G. Janowska, “Thermal properties and flammability of nanocomposites based on nitrile rubbers and activated halloysite nanotubes and carbon nanofibers,” Thermochimica Acta, vol. 549, pp. 6–12, 2012. View at Google Scholar
  21. M. Du, B. Guo, and D. Jia, “Thermal stability and flame retardant effects of halloysite nanotubes on poly(propylene),” European Polymer Journal, vol. 42, no. 6, pp. 1362–1369, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. L. C. Tan, Y. W. Chen, W. H. Zhou, and S. W. Ye, “Crystallization behavior and mechanical strength of poly (butylene succinate-co-ethylene glycol)-based nanocomposites using functionalized multiwalled carbon nanotubes,” Polymer Engineering and Science, vol. 52, no. 12, pp. 2506–2517, 2012. View at Google Scholar
  23. Z.-X. Jia, Y.-F. Luo, S.-Y. Yang, B.-C. Guo, M.-L. Du, and D.-M. Jia, “Morphology, interfacial interaction and properties of styrene-butadiene Rubber/Modified halloysite nanotube nanocomposites,” Chinese Journal of Polymer Science, vol. 27, no. 6, pp. 857–864, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Joo, Y. Jeon, S. U. Lee et al., “Aggregation and stabilization of carboxylic acid functionalized halloysite nanotubes (HNT-COOH),” Journal of Physical Chemistry C, vol. 116, no. 34, pp. 18230–18235, 2012. View at Google Scholar
  25. K. Prashantha, M. F. Lacrampe, and P. Krawczak, “Processing and characterization of halloysite nanotubes filled polypropylene nanocomposites based on a masterbatch route: effect of halloysites treatment on structural and mechanical properties,” Express Polymer Letters, vol. 5, no. 4, pp. 295–307, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. T. Enomae, N. Yamaguchi, and F. Onabe, “Influence of coating properties on paper-to-paper friction of coated paper,” Journal of Wood Science, vol. 52, no. 6, pp. 509–513, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Ashori, W. D. Raverty, and J. Harun, “Effect of chitosan addition on the surface properties of kenaf (Hibiscus cannabinus) paper,” Fibers and Polymers, vol. 6, no. 2, pp. 174–179, 2005. View at Google Scholar · View at Scopus
  28. M. Du, B. Guo, M. Liu, X. Cai, and D. Jia, “Reinforcing thermoplastics with hydrogen bonding bridged inorganics,” Physica B, vol. 405, no. 2, pp. 655–662, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. M. L. Du, B. C. Guo, Y. D. Lei, M. X. Liu, and D. M. Jia, “Carboxylated butadiene-styrene rubber/halloysite nanotube nanocomposites: interfacial interaction and performance,” Polymer, vol. 49, no. 22, pp. 4871–4876, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. L. Tai, J. S. Qian, Y. C. Zhang, and J. D. Huang, “Study of surface modification of nano-SiO2 with macromolecular coupling agent (LMPB-g-MAH),” Chemical Engineering Journal, vol. 141, no. 1–3, pp. 354–361, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. W. L. Zhang and H. J. Choi, “Fabrication of semiconducting polyaniline-wrapped halloysite nanotube composite and its electrorheology,” Colloid and Polymer Science, vol. 290, no. 17, pp. 1743–1748, 2012. View at Google Scholar
  32. C. Y. Tang, T. M. Yue, D. Z. Chen, and C. P. Tsui, “Effect of surface coating on the rheological properties of a highly opaque nano-TiO2/HIPS composite,” Materials Letters, vol. 61, no. 23-24, pp. 4618–4621, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. Z. Y. Yang, Y. J. Tang, and J. H. Zhang, “Surface modification of CaCO3 nanoparticles with silane coupling agent for improvement of the interfacial compatibility with styrene-butadiene rubber(SBR) latex,” Chalcogenide Letters, vol. 10, no. 4, pp. 131–141, 2013. View at Google Scholar
  34. C. Ai Wah, L. Yub Choong, and G. Seng Neon, “Effects of titanate coupling agent on rheological behaviour, dispersion characteristics and mechanical properties of talc filled polypropylene,” European Polymer Journal, vol. 36, no. 4, pp. 789–801, 2000. View at Publisher · View at Google Scholar · View at Scopus
  35. J. H. Gou, S. O'Braint, H. Gu, and G. Song, “Damping augmentation of nanocomposites using carbon nanofiber paper,” Journal of Nanomaterials, vol. 2006, Article ID 32803, 7 pages, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. N.-Y. Ning, Q.-J. Yin, F. Luo, Q. Zhang, R. Du, and Q. Fu, “Crystallization behavior and mechanical properties of polypropylene/halloysite composites,” Polymer, vol. 48, no. 25, pp. 7374–7384, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. S. Rooj, A. Das, V. Thakur, R. N. Mahaling, A. K. Bhowmick, and G. Heinrich, “Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes,” Materials and Design, vol. 31, no. 4, pp. 2151–2156, 2010. View at Publisher · View at Google Scholar · View at Scopus