Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013 (2013), Article ID 596324, 7 pages
http://dx.doi.org/10.1155/2013/596324
Research Article

Preparation of Bismuth Oxide Photocatalyst and Its Application in White-light LEDs

1Ph.D. Program of Electrical and Communications Engineering, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan
2Department of Environmental Engineering and Science, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan
3Department of Materials Science and Engineering, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan
4Department of Photonics, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan
5Department of Applied Mathematics, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan
6Department of Electrical Engineering, Feng Chia University, No. 100, Wen Hwa Road, Taichung 40724, Taiwan

Received 10 July 2013; Accepted 14 September 2013

Academic Editor: Jiaguo Yu

Copyright © 2013 Yen-Chang Chu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. D. Dupuis and M. R. Krames, “History, development, and applications of high-brightness visible light-emitting diodes,” Journal of Lightwave Technology, vol. 26, no. 9, pp. 1154–1171, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Mirhosseini, M. F. Schubert, S. Chhajed, J. Cho, J. K. Kim, and E. F. Schubert, “Improved color rendering and luminous efficacy in phosphor-converted white light-emitting diodes by use of dual-blue emitting active regions,” Optics Express, vol. 17, no. 13, pp. 10806–10813, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. M. K. Lee, C. L. Ho, and C. H. Fan, “High light extraction efficiency of gallium nitride light emitting diode with silicon oxide hemispherical microlens,” Applied Physics Letters, vol. 92, no. 6, Article ID 061103, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Ohno, “Spectral design considerations for white LED color rendering,” Optical Engineering, vol. 44, no. 11, Article ID 111302, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. T. S. Kim, S.-M. Kim, Y. H. Jang, and G. Y. Jung, “Increase of light extraction from GaN based light emitting diodes incorporating patterned structure by colloidal lithography,” Applied Physics Letters, vol. 91, no. 17, Article ID 171114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. Anses Press Kit, Lighting Systems Using Light-Emitting Diodes: Health Issues To Be Considered, 2010.
  7. J.-C. Su, C.-L. Lu, and C.-W. Chu, “Design and fabrication of white light emitting diodes with an omnidirectional reflector,” Applied Optics, vol. 48, no. 26, pp. 4942–4946, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. J.-C. Su and C.-L. Lu, “Color temperature tunable white light emitting diodes packaged with an omni-directional reflector,” Optics Express, vol. 17, no. 24, pp. 21408–21413, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Shen, H. Feng, Z. Xu, and S. Jin, “GaInN light-emitting diodes with omni-directional reflector using nanoporous SnO2 film,” Chinese Optics Letters, vol. 6, no. 2, pp. 152–153, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. O. Rico-Fuentes, E. Sánchez-Aguilera, C. Velasquez, R. Ortega-Alvarado, J. C. Alonso, and A. Ortiz, “Characterization of spray deposited bismuth oxide thin films and their thermal conversion to bismuth silicate,” Thin Solid Films, vol. 478, no. 1-2, pp. 96–102, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Wang, C. Shao, Y. Liu, and L. Zhang, “Photocatalytic properties BiOCl and Bi2O3 nanofibers prepared by electrospinning,” Scripta Materialia, vol. 59, no. 3, pp. 332–335, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Li, K. Li, and H. Wang, “Hydrothermal synthesis and photocatalytic properties of bismuth molybdate materials,” Materials Chemistry and Physics, vol. 116, no. 1, pp. 134–142, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Martínez-de la Cruz and U. M. G. Pérez, “Photocatalytic properties of BiVO4 prepared by the co-precipitation method: degradation of rhodamine B and possible reaction mechanisms under visible irradiation,” Materials Research Bulletin, vol. 45, no. 2, pp. 135–141, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Weidong, Q. Wei, W. Xiaohong, D. Xianbo, C. Long, and J. Zhaohua, “The photocatalytic properties of bismuth oxide films prepared through the sol-gel method,” Thin Solid Films, vol. 515, no. 13, pp. 5362–5365, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Yu, J. Zhang, H. Zhang et al., “Facile solvothermal synthesis of porous Bi2O3 microsphere and their photocatalytic performance under visible light,” Micro and Nano Letters, vol. 7, no. 8, pp. 814–817, 2012. View at Publisher · View at Google Scholar
  16. L. Leontie, M. Caraman, M. Alexe, and C. Harnagea, “Structural and optical characteristics of bismuth oxide thin films,” Surface Science, vol. 507–510, pp. 480–485, 2002. View at Publisher · View at Google Scholar · View at Scopus