Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites

Table 3

Crystallisation properties obtained from WAXD.

Nylon 6,6	𝐿(100), nm			𝐿(010/110), nm			CI
	4.46			4.01			0.37
Nanofiller	Weight, %			Weight, %			Weight, %
	0.1	0.3	0.5	0.1	0.3	0.5	0.1	0.3	0.5
CNT	5.08	5.28	5.37	4.10	3.75	4.15	0.38	0.39	0.39
OCNT	4.99	4.91	5.10	4.16	4.18	4.01	0.38	0.39	0.40
f-CNT	5.07	5.06	4.87	3.83	3.97	3.94	0.41	0.41	0.40
RGO	4.86	4.92	5.03	4.34	4.30	4.05	0.38	0.39	0.39
GO	4.88	4.75	4.82	4.25	4.21	4.22	0.39	0.40	0.40
f-Ge	4.78	4.91	4.56	4.01	4.20	4.24	0.39	0.40	0.40