Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 231848, 8 pages
http://dx.doi.org/10.1155/2015/231848
Research Article

Effect of Co Distribution on Plastic Deformation of Nanocrystalline Al-10.2 at.% Co Alloy

1School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
2Institute for Metals Superplasticity Problems of Russian Academy of Sciences, 39 Khalturin Street, Ufa 450001, Russia
3Tomsk State University, Lenin Street 36, Tomsk 634036, Russia
4Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075

Received 8 December 2014; Revised 13 January 2015; Accepted 13 January 2015

Academic Editor: Fathallah Karimzadeh

Copyright © 2015 Rita I. Babicheva et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Z. Valiev, A. P. Zhilyaev, and T. G. Langdon, Bulk Nanostructured Materials: Fundamentals and Applications, John Wiley & Sons, Hoboken, NJ, USA, 2014.
  2. A. P. Zhilyaev and T. G. Langdon, “Using high-pressure torsion for metal processing: fundamentals and applications,” Progress in Materials Science, vol. 53, no. 6, pp. 893–979, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Zehetbauer, R. Grössinger, H. Krenn et al., “Bulk nanostructured functional materials by severe plastic deformation,” Advanced Engineering Materials, vol. 12, no. 8, pp. 692–700, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Estrin and A. Vinogradov, “Extreme grain refinement by severe plastic deformation: a wealth of challenging science,” Acta Materialia, vol. 61, no. 3, pp. 782–817, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Z. Valiev and T. G. Langdon, “The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques,” Advanced Engineering Materials, vol. 12, no. 8, pp. 677–691, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Z. Valiev, I. Sabirov, A. P. Zhilyaev, and T. G. Langdon, “Bulk nanostructured metals for innovative applications,” JOM, vol. 64, no. 10, pp. 1134–1142, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. X. Wu, Y. W. Zhang, M. H. Jhon, J. R. Greer, and D. J. Srolovitz, “Nanostructure and surface effects on yield in Cu nanowires,” Acta Materialia, vol. 61, no. 6, pp. 1831–1842, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Sitdikov, E. Avtokratova, R. Babicheva, T. Sakai, K. Tsuzaki, and Y. Watanabe, “Influence of processing regimes on fine-grained microstructure development in an AlMgSc alloy by hot equal-channel angular pressing,” Materials Transactions, vol. 53, no. 1, pp. 56–62, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. O. S. Sitdikov, E. V. Avtokratova, and R. I. Babicheva, “Effect of temperature on the formation of a microstructure upon equal-channel angular pressing of the Al-Mg-Sc 1570 alloy,” The Physics of Metals and Metallography, vol. 110, no. 2, pp. 153–161, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. D. V. Bachurin and P. Gumbsch, “Elastic and plastic anisotropy after straining of nanocrystalline palladium,” Physical Review B—Condensed Matter and Materials Physics, vol. 85, no. 8, Article ID 085407, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. R. K. Khisamov, I. M. Safarov, R. R. Mulyukov, and Y. M. Yumaguzin, “Effect of grain boundaries on the electron work function of nanocrystalline nickel,” Physics of the Solid State, vol. 55, no. 1, pp. 1–4, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Shanmugasundaram, M. Heilmaier, B. S. Murty, and V. S. Sarma, “On the Hall-Petch relationship in a nanostructured Al-Cu alloy,” Materials Science and Engineering A, vol. 527, no. 29-30, pp. 7821–7825, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. R. K. Khisamov, Y. M. Yumaguzin, R. R. Mulyukov et al., “Effect of a crystalline structure on the ion-electron emission of the Al + 6% Mg alloy,” Technical Physics Letters, vol. 39, no. 3, pp. 265–267, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Zhang, Y. N. Huang, C. Mao, and P. Peng, “Structural, elastic and electronic properties of θ (Al2Cu) and S (Al2CuMg) strengthening precipitates in Al-Cu-Mg series alloys: first-principles calculations,” Solid State Communications, vol. 152, no. 23, pp. 2100–2104, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. E. Avtokratova, O. Sitdikov, M. Markushev, and R. Mulyukov, “Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy,” Materials Science and Engineering A, vol. 538, pp. 386–390, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Zha, Y. Li, R. H. Mathiesen, R. Bjørge, and H. J. Roven, “Achieve high ductility and strength in an Al-Mg alloy by severe plastic deformation combined with inter-pass annealing,” Materials Science and Engineering A, vol. 598, pp. 141–146, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. U. F. Al-Qawabeha and S. M. Al-Qawabah, “Effect of roller burnishing on pure aluminum alloyed by copper,” Industrial Lubrication and Tribology, vol. 65, no. 2, pp. 71–77, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Wang, S.-L. Shang, Y. Wang et al., “First-principles calculations of binary Al compounds: enthalpies of formation and elastic properties,” Calphad, vol. 35, no. 4, pp. 562–573, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Zhou, L. Liu, B. Li, Q. Song, and P. Wu, “Structural, elastic, and electronic properties of Al-Cu intermetallics from first-principles calculations,” Journal of Electronic Materials, vol. 38, no. 2, pp. 356–364, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Zugic, B. Szpunar, V. D. Krstic, and U. Erb, “Effect of porosity on the elastic response of brittle materials: an embedded-atom method approach,” Philosophical Magazine A, vol. 75, no. 4, pp. 1041–1055, 1997. View at Google Scholar · View at Scopus
  21. X. Sauvage, A. Ganeev, Y. Ivanisenko, N. Enikeev, M. Murashkin, and R. Valiev, “Grain boundary segregation in UFG alloys processed by severe plastic deformation,” Advanced Engineering Materials, vol. 14, no. 11, pp. 968–974, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Sabirov, M. Y. Murashkin, and R. Z. Valiev, “Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development,” Materials Science and Engineering A, vol. 560, pp. 1–24, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Sauvage, N. Enikeev, R. Valiev, Y. Nasedkina, and M. Murashkin, “Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy,” Acta Materialia, vol. 72, pp. 125–136, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. M. M. Abramova, N. A. Enikeev, R. Z. Valiev et al., “Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel,” Materials Letters, vol. 136, pp. 349–352, 2014. View at Publisher · View at Google Scholar
  25. J. Schiøtz, T. Vegge, F. D. Di Tolla, and K. W. Jacobsen, “Atomic-scale simulations of the mechanical deformation of nanocrystalline metals,” Physical Review B—Condensed Matter and Materials Physics, vol. 60, no. 17, pp. 11971–11983, 1999. View at Publisher · View at Google Scholar · View at Scopus
  26. D. V. Bachurin and P. Gumbsch, “Atomistic simulation of the deformation of nanocrystalline palladium: the effect of voids,” Modelling and Simulation in Materials Science and Engineering, vol. 22, no. 2, Article ID 025011, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. X. Tingdong and Z. Lei, “The elastic modulus in the grain-boundary region of polycrystalline materials,” Philosophical Magazine Letters, vol. 84, no. 4, pp. 225–233, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. R. I. Babicheva and K. Y. Mulyukov, “Thermomechanical treatment to achieve stable two-way shape memory strain without training in Ti-49.8 at.% Ni alloy,” Applied Physics A, vol. 116, no. 4, pp. 1857–1865, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Latapie and D. Farkas, “Effect of grain size on the elastic properties of nanocrystalline α-iron,” Scripta Materialia, vol. 48, no. 5, pp. 611–615, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. S.-J. Zhao, K. Albe, and H. Hahn, “Grain size dependence of the bulk modulus of nanocrystalline nickel,” Scripta Materialia, vol. 55, no. 5, pp. 473–476, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Zhou, S. van Petegem, D. Segers, U. Erb, K. T. Aust, and G. Palumbo, “On Young's modulus and the interfacial free volume in nanostructured Ni-P,” Materials Science and Engineering A, vol. 512, no. 1-2, pp. 39–44, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Grewer, J. Markmann, R. Karos, W. Arnold, and R. Birringer, “Shear softening of grain boundaries in nanocrystalline Pd,” Acta Materialia, vol. 59, no. 4, pp. 1523–1529, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Abo-Elsoud, H. Esmail, and M. S. Sobhy, “Correlation between elastic modulus of Al-Cu alloys and metallurgical characteristics of their constituent elements,” Radiation Effects and Defects in Solids, vol. 162, no. 9, pp. 685–690, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Sha, S. P. Ringer, Z. C. Duan, and T. G. Langdon, “An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing,” International Journal of Materials Research, vol. 100, no. 12, pp. 1674–1678, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. R. Fernández and G. González-Doncel, “A unified description of solid solution creep strengthening in Al-Mg alloys,” Materials Science and Engineering A, vol. 550, pp. 320–324, 2012. View at Publisher · View at Google Scholar · View at Scopus
  36. A. Villuendas, J. Jorba, and A. Roca, “The role of precipitates in the behavior of Young's modulus in aluminum alloys,” Metallurgical and Materials Transactions A, vol. 45, no. 9, pp. 3857–3865, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. P. V. Liddicoat, X. Z. Liao, Y. H. Zhao et al., “Nanostructural hierarchy increases the strength of aluminium alloys,” Nature Communications, vol. 1, article 63, 2010. View at Publisher · View at Google Scholar
  38. R. Ferragut, P. V. Liddicoat, X.-Z. Liao et al., “Chemistry of grain boundary environments in nanocrystalline Al 7075,” Journal of Alloys and Compounds, vol. 495, no. 2, pp. 391–393, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. I. G. Brodova, I. G. Shirinkina, A. N. Petrova, O. V. Antonova, and V. P. Pilyugin, “Evolution of the structure of V95 aluminum alloy upon high-pressure torsion,” The Physics of Metals and Metallography, vol. 111, no. 6, pp. 630–638, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. J. Crump, X. G. Qiao, and M. J. Starink, “The effect of high-pressure torsion on the behaviour of intermetallic particles present in Al-1Mg and Al-3Mg,” Journal of Materials Science, vol. 47, no. 4, pp. 1751–1757, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. B. Straumal, R. Valiev, O. Kogtenkova et al., “Thermal evolution and grain boundary phase transformations in severely deformed nanograined Al-Zn alloys,” Acta Materialia, vol. 56, no. 20, pp. 6123–6131, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. B. B. Straumal, A. Korneva, O. Kogtenkova et al., “Grain boundary wetting and premelting in the Cu-Co alloys,” Journal of Alloys and Compounds, vol. 615, supplement 1, pp. S183–S187, 2014. View at Publisher · View at Google Scholar · View at Scopus
  43. B. B. Straumal, X. Sauvage, B. Baretzky, A. A. Mazilkin, and R. Z. Valiev, “Grain boundary films in Al-Zn alloys after high pressure torsion,” Scripta Materialia, vol. 70, no. 1, pp. 59–62, 2014. View at Publisher · View at Google Scholar · View at Scopus
  44. R. I. Babicheva, S. V. Dmitriev, Y. Zhang et al., “Effect of grain boundary segregations of Fe, Co, Cu, Ti, Mg and Pb on small plastic deformation of nanocrystalline Al,” Computational Materials Science, vol. 98, pp. 410–416, 2015. View at Publisher · View at Google Scholar
  45. S. Brandstetter, P. M. Derlet, S. Van Petegem, and H. van Swygenhoven, “Williamson-Hall anisotropy in nanocrystalline metals: X-ray diffraction experiments and atomistic simulations,” Acta Materialia, vol. 56, no. 2, pp. 165–176, 2008. View at Publisher · View at Google Scholar · View at Scopus
  46. D. V. Bachurin and P. Gumbsch, “Atomistic simulation of straining of nanocrystalline palladium,” Acta Materialia, vol. 58, pp. 5491–5501, 2010. View at Google Scholar
  47. R. J. Gillespie, D. A. Humphreys, N. C. Baird, and E. A. Robinson, Chemistry, Allyn & Bacon, Newton, Mass, USA, 1986.
  48. S. Plimpton, “Fast parallel algorithms for short-range molecular dynamics,” Journal of Computational Physics, vol. 117, no. 1, pp. 1–19, 1995. View at Publisher · View at Google Scholar · View at Scopus
  49. M. S. Daw and M. I. Baskes, “Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals,” Physical Review B, vol. 29, no. 12, pp. 6443–6453, 1984. View at Publisher · View at Google Scholar · View at Scopus
  50. E. A. Korznikova and S. V. Dmitriev, “Mechanisms of deformation-induced grain growth of a two-dimensional nanocrystal at different deformation temperatures,” The Physics of Metals and Metallography, vol. 115, no. 6, pp. 570–575, 2014. View at Publisher · View at Google Scholar
  51. S. Ogut and K. M. Rabe, “Ab initio pseudopotential calculations for aluminum-rich cobalt compounds,” Physical Review B, vol. 50, no. 4, pp. 2075–2084, 1994. View at Publisher · View at Google Scholar · View at Scopus
  52. K. Zhou, A. A. Nazarov, and M. S. Wu, “Competing relaxation mechanisms in a disclinated nanowire: temperature and size effects,” Physical Review Letters, vol. 98, no. 3, Article ID 035501, 2007. View at Publisher · View at Google Scholar · View at Scopus
  53. M. S. Wu, A. A. Nazarov, and K. Zhou, “Misorientation dependence of the energy of [1–100] symmetrical tilt boundaries in hcp metals: prediction by the disclination-structural unit model,” Philosophical Magazine, vol. 8, pp. 785–806, 2004. View at Google Scholar
  54. M. S. Wu, K. Zhou, and A. A. Nazarov, “Crack nucleation at disclinated triple junctions,” Physical Review B: Condensed Matter and Materials Physics, vol. 76, no. 13, Article ID 134105, 2007. View at Publisher · View at Google Scholar · View at Scopus
  55. K. Zhou, A. A. Nazarov, and M. S. Wu, “Continuum and atomistic studies of a disclinated crack in a bicrystalline nanowire,” Physical Review B—Condensed Matter and Materials Physics, vol. 73, no. 4, Article ID 045410, 2006. View at Publisher · View at Google Scholar · View at Scopus
  56. R. I. Babicheva, K. A. Bukreeva, S. V. Dmitriev, R. R. Mulyukov, and K. Zhou, “Strengthening of NiAl nanofilms by introducing internal stresses,” Intermetallics, vol. 43, pp. 171–176, 2013. View at Publisher · View at Google Scholar · View at Scopus