Abstract

The synthesis of boron nanowires, nanotubes, and nanosheets using a thermal vapor deposition process is reported. This work confirms previous research and provides a new method capable of synthesizing boron nanomaterials. The materials were made by using various combinations of MgB2, Mg(BH4)2, MCM-41, NiB, and Fe wire. Unlike previously reported methods, a nanoparticle catalyst and a silicate substrate are not required for synthesis. Two types of boron nanowires, boron nanotubes, and boron nanosheets were made. Their morphology and chemical composition were determined through the use of scanning electron microscopy, transmission electron microscopy, and electron energy loss spectroscopy. These boron-based materials have potential for electronic and hydrogen storage applications.

1. Introduction

Carbon nanotubes and graphene have been researched extensively for the past two decades due to their remarkable electrical, thermal, and mechanical properties [17], which surpass those of a wide range of materials. For this reason, carbon nanotube/graphene analogs involving other elements have been synthesized such as boron nitride [810], titanium dioxide [11], numerous sulfides [1214], and zinc oxide [15]. A common trait that many of these materials possess is that they have a layered crystal structure. It would therefore be of interest to synthesize elements or compounds with layered nanostructures that do not form a layered structure in their bulk forms. These types of materials would require special consideration to determine how flat or rolled layers form during their synthesis.

Pure boron was reported to be stable in a nanotube configuration [1618] and modeling of pure boron sheets (a graphene analog) has also been performed [19, 20]. (Pure in this case simply means that the vast majority of the boron in the structure is not part of a compound.) Pure boron nanostructures could have properties unique in comparison to bulk boron phases, potentially making them useful for electronic and optical applications due to electron confinement effects similar to that in graphene and carbon nanotubes. Moreover, boron nanostructures would possess superior thermal and mechanical properties in comparison to their bulk analogs, much like in carbon and boron nitride nanostructures. From a purely theoretical perspective, understanding how a group 3 element such as boron can remain stable in a nanotube configuration is of great interest. The mechanism which keeps such a structure stable could be pertinent to the formation of other types of nanostructures using different elements or compounds. A novel process to grow boron nanowires and nanotubes is reported here. Additionally, the synthesis of a novel boron nanostructure, boron nanosheets, is described.

2. Experimental

A method to grow boron nanostructures was employed based on the procedure first used to synthesize boron nanotubes [16, 21]. However, there were some key differences. For example, BCl3 was not used because it is highly reactive; instead, solid boron precursors and catalyst were utilized in a solid-solid reaction process in flowing inert gas. First, 50 wt% MgB2 (Alfa Aesar), 30 wt% nano-NiB (prepared in a manner following [22, 23]), and 20 wt% of mesostructured hexagonal framework MCM–41 zeolite powder (Sigma-Aldrich) are mixed and reduced in particle size by grinding using a mortar and pestle. Typically, 0.02–0.1 grams of the mixture was added and ground in an agate mortar for about an hour to ensure that the powder was well mixed. It was then ground further for several hours using a rotary mixer, which uses cylindrical ceramic pieces as milling media. Finally, the mixture was loaded into the quartz reactor of the chemical vapor deposition (CVD) apparatus shown in Figure 1.

The quartz tube was pumped down to 10−3 torr and heated to 950°C at a rate of 10°C/min under flowing argon at 100 sccm (standard cubic centimeters per minute). The temperature was held at 950°C for 60 minutes. After completion of the reaction, the furnace was switched off and the reaction tube was allowed to cool down to room temperature under flowing argon. Alternatively, one could use Mg(BH4)2 instead of MgB2, but then the optimal reaction temperature would be 800°C. Another growth condition using MgB2 was also tested where an iron wire replaced nano-NiB as the catalyst and the MCM-41 template was not used. This was to test the importance of the catalyst and the template in the process reaction.

Scanning electron microscopy (SEM): SEM images were obtained with a VP-1530 Carl Zeiss LEO (Peabody, MA) field emission scanning electron microscope. The samples were mounted on aluminum stubs using double-sided carbon tape.

Scanning transmission electron microscopy (STEM): a FEI CM-20 FEG STEM equipped with a Gatan Enfina PEELS Spectrometer and an Oxford Max-80 SDD EDS system was used. Samples were suspended in ultrapure methanol at 1 wt% concentration, and a 1 μL drop of the solution was placed on a lacey carbon TEM grid placed on a filter paper. The TEM grid was then placed in a vacuum oven to dry at 80° C. Electron energy loss spectroscopy (EELS) analysis was performed in conjunction with STEM dark field imaging.

3. Results and Discussion

The boron nanowires (BNWs) synthesized are shown in Figures 24. BNWs are well known in the literature and have been shown to have useful characteristics [2426] leading to applications for them in flexible electronics and field effect transistors. Figure 2 shows a TEM image of a boron nanowire prepared using MgB2 as the precursor. The nanowires have diameters in the 30–50 nm range, with lengths up to many microns. A catalyst particle is evident at the head of the nanowire indicating that the growth mechanism is through a vapor-liquid-solid (VLS) reaction process. In this sample, only nanowires were observed with no evidence of boron nanotubes or nanosheets. Fast Fourier transform (FFT) analysis of the nanowires indicated that they have a crystal spacing of 0.43 nm. Spacing of 0.48 nm and 0.38 nm was also found, but due to lack of image resolution, the evidence for them is not conclusive. Note that a 0.38 nm spacing has been previously reported for boron nanowires [21]. EELS analysis confirmed that the nanowire consisted only of boron. The region around a nanowire head with the catalyst showed a crystal spacing of 0.72 nm using FFT analysis, indicating that the material surrounding the catalyst has a crystal structure that is different from that of the rest of the nanowire. An SEM image is included which shows that the nanowires can be made at high yield with consistent dimensions.

When the boron nanowires were grown using Mg(BH4)2 as the precursor, a different material is produced, as shown in Figure 3. Pure boron nanowires were found in the samples prepared, but they had extremely large aspect ratios, with lengths up to 50 μm and diameters in the range of 30–50 nm. Using FFT image analysis, crystal spacing of 0.94 nm, 0.34 nm, and 0.28 nm was found, indicating that these nanowires have a different crystal structure than those obtained using MgB2. Moreover, an extremely thin nanofibrous material was also found, as evident from Figure 4. The nanofibrous material had lengths of roughly 100–200 nm and diameters close to 20 nm. High resolution imaging and spectroscopic analysis could not, however, be carried out on this material because of its instability in the electron beam. These nanostructures therefore clearly exhibited a VLS type growth mechanism, and unlike other phases of boron, they showed significant curvature. They also appeared to be hollow, but this was difficult to confirm conclusively. These findings, therefore, indicate the formation of a boron nanotube as opposed to a nanowire, but improved data analysis would be needed to confirm this.

In another approach, the MCM-41 template was not used and the nano-NiB catalyst was replaced by an iron wire, but otherwise, the process was the same as that used with MgB2. In prior studies, it was assumed that MCM-41 was necessary as a template for the growth of boron nanotubes and that a nanoparticle catalyst was also crucial. SEM and STEM images from samples prepared using this method are shown in Figures 57. Here, both nanotubes and nanosheets were found among boron nanowires. The nanotubes were hollow in their interior and clearly had sidewalls. These two characteristics are critical, as they differentiate nanotubes from nanowires. The boron nanotubes showed a diameter of roughly 10 nm and lengths up to many microns. An individual nanotube depicted in Figure 6 clearly had two different diameters caused by variations in the growth conditions around the nanotube. Additionally, boron nanosheets, thin sheetlike nanostructures covering areas on the order of a number of square micrometers, were found in samples prepared by this method. The sheets were revealed to be amorphous by selected area electron diffraction.

To summarize, in comparison to well-known techniques, such as magnetron sputtering, to synthesize boron nanowires [2426], the reported process has the added advantage of producing a wide variety of structures. Furthermore, because it is a thermal vapor deposition technique, there could be some advantages in scaling and flexibility. However, other methods are most likely more suited for producing well-aligned arrays of boron nanowires. The CVD method used here would have to be modified for producing aligned nanostructured arrays.

4. Conclusions

A novel method which would need future optimization is described which can grow boron nanotubes, boron nanosheets (a new material), and boron nanowires. This method is significant because MCM-41, nanosized catalyst, and BCl3 gas are not required for the process. This greatly simplifies creating these boron nanomaterials and makes scale-up and future experimentation much more straightforward. These materials have not been characterized thoroughly, but they could possess interesting properties. Future experiments could focus on methods to increase the yield of boron nanosheets and boron nanotubes. As of now, the effect of temperature, reaction time, catalyst, and so forth is not well understood. Another, even more exciting possibility beyond these homogeneous nanostructures would be the formation of boron-based nanoheterostructures, particularly with boron nitride and carbon. The boron nanosheets amorphous nature lends them to this type of application, as it eliminates issues with crystal mismatch. All of these experiments described in this paper were conducted in an inert atmosphere, but the addition of different reactant gases can result in various nanostructures [27]. The intermittent use of reactant gases could be an intriguing approach to create nanoheterostructures.

Conflict of Interests

The authors have no conflict of interests to disclose.