Theoretical Study on Cyclopeptides as the Nanocarriers for Li+, Na+, K+ and F−, Cl−, Br−

Liu, Lili; Chen, Shimou

doi:https://doi.org/10.1155/2015/276191

Journal of Nanomaterials

On this page

Abstract Introduction Results and Discussion Conclusions Acknowledgments References Copyright Related Articles

Special Issue

Nanomaterials for Renewable Energy

View this Special Issue

Research Article | Open Access

Volume 2015 | Article ID 276191 | https://doi.org/10.1155/2015/276191

Theoretical Study on Cyclopeptides as the Nanocarriers for Li⁺, Na⁺, K⁺ and F⁻, Cl⁻, Br⁻

Lili Liu¹and Shimou Chen²

Academic Editor: Hanwen Sun

Received06 Jul 2014

Accepted07 Oct 2014

Published09 Jun 2015

Abstract

The interaction process between a series of cyclopeptide compounds cyclo(Gly)_n and monovalent ions (Li⁺, Na⁺, K⁺, F⁻, Cl⁻, and Br⁻) was studied using theoretical calculation. The mechanism of combination between the cyclo(Gly)_n and ions was discussed through binding energy, Mulliken electron population, and hydrogen bond. It was found that for the same cyclopeptide the binding energy has the order of cyclo(Gly)_n–Li⁺ > cyclo(Gly)_n–Na⁺ > cyclo(Gly)_n–K⁺ and cyclo(Gly)_n–F⁻ > cyclo(Gly)_n–Br⁻ > cyclo(Gly)_n–Cl⁻. The binding energy manifests the stable complex of cyclo(Gly)_n and ions can be formed, and the different energy shows the potential use of cyclo(Gly)_n as nanocarriers for metal ions or the extractant for ions separation.

1. Introduction

As an important family of host-guest complexation, ion carriers play an important role in various biological processes [1]. In particular, in biomedical research, the controlled delivery of drugs to specific tissues in the body is an ongoing challenge. Ion carriers are promising delivery vehicles that offer increased drugs circulation times and enhanced dissolution rates and bioavailability. Macrocyclic compound is one of the best choices as ion carriers because of its special structure. For example, crown ether [2, 3], cyclopeptide [4–9], and calixarene [10–12] can combine with alkali metal ions or alkaline-earth metal ions to form a dissolvable complex or act as ion and neutral molecular carriers. Since the 1940s, when the first cyclopeptide gramicidin was found [13], due to its similar structure to macrocyclic compound, the cyclopeptide aroused much interest in host-guest chemistry. It is demonstrated that cyclopeptides are promising materials as carriers, antibiotics, regulators of membrane ion and systems for specific guest recognition, and so forth [5, 14]. Many theoretical calculations on cyclopeptides-ions complex were performed in order to direct the construction of ion-assisted cyclopeptide system [15–17]. Owning to the metabolism stability and the high bioavailability, many of them could be used as prodrugs, medicament, and ion carriers [18, 19]. It is believed that the biological activities of cyclopeptide with metal ion are of much potential application in medical and biological chemistry.

In all subjects related to cyclopeptide or modified cyclopeptide as ion carriers, the stereoselectivity on ions becomes the focus of the experimental and theoretical studies. This selectivity is due to the special structure of the cyclopeptide. Cyclopeptide has a cavity structure with restricted carbonyl group and amino group on inner side of the molecule and a rigid molecule skeleton that can support the molecule cavity. Tan et al. [20] have studied the cyclopeptide composed of cyclo through computational method. Huang et al. [21] have designed and synthesized a cystine-bearing pseudo-cyclopeptide as amphireceptor; it binds to cations or anions through the carbonyl or amino groups, respectively. Using ab initio calculations, Kim and coworkers [22] proposed that cyclic peptides may be able to serve as good amphi-ionophores because of the availability of both amide and crown-like structures within the molecule. However, to design useful cyclopeptide carrier and shed light on the related organic synthesis, various factors such as the structure of the component peptide, peptide number, and the interaction of the ions and peptide should be studied carefully.

In the previous work reported by Zhu et al. [23], the preferred conformations of cyclic dipeptides were first studied using the density functional theory (DFT). Herein, we take a systemically theoretical study on the conformation and complexation of cyclo(Gly)_n (n = 4, 6, and 8) and monovalent ions (Li⁺, Na⁺, K⁺, F⁻, Cl⁻, and Br⁻) using the DFT B3LYP method at 6-31 G(d) level. To the best of our knowledge, the study of interaction of the cycloquadpeptide, cyclohexapeptide, and cyclooctopeptide with both anions and cations synchronously would be the first report in the literature. It should be mentioned that only the cases of one cyclopeptide carrying one ion were discussed in this paper; that is, the ratio of the cyclopeptide carrier to the ions receptor is 1 : 1. The cyclopeptide carrying multi-ions will be reported in the future.

2. Computational Methods

Glycine (Gly) was chosen as monomer to form cyclopeptide because of its simple structure. We begin our research with the construction of cyclohexapeptide; there are 8 different isomerides of Gly cyclohexapeptide: all of them were optimized by HF/STO-3G method and the most stable ones were selected as ion carrier for further study. Based on the stable configuration of three kinds of cyclopeptide, the complexes of three kinds of cyclopeptide with cations K⁺, Li⁺, and Na⁺ and anions F⁻, Cl⁻, and Br⁻ were optimized at B3LYP/6-31G level, respectively. All computations were carried out using the Gaussian 03 package [24].

3. Results and Discussion

3.1. The Optimum Conformations

The conformations of the most stable cyclohexapeptide are shown in Figure 1; all of them were optimized by HF/STO-3G method. It has a transconfiguration structure. In order to obtain a deep understanding of the characteristic of the cycloquadpeptide, cyclohexapeptide, and cyclooctopeptide, the three cyclopeptides were further optimized at B3LYP/6-31G level to guarantee that the configuration is the most stable one [25, 26].

The optimum conformations of the cation-cyclopeptide complexes were shown in Figure 2. Both the top view and side view were given considering the complicated geometry of {cyclo(Gly)_n–M⁺} (n = 4, 6, 8; M = Li, Na, K).

From Figure 2, the {cyclo(Gly)₄} complexes hold a C₁: the symmetry group after combining a cation to form {cyclo(Gly)₄–M⁺} (M = Li, Na, K) complexes. All three cations hover outside the cyclopeptide for the small space of the cycloquadpeptide cavity (as shown in Figure 2). The two carbonyl groups of the cycloquadpeptide turn towards the cation ion from original position. The configuration of cyclopeptide was distorted to a boat form, and the ions lay over the boat. The average distance between the cation ion and the carbonyl oxygen is 0.186 nm, 0.222 nm, and 0.285 nm for Li⁺, Na⁺, and K⁺, respectively.

Comparing the {cyclo(Gly)₆} with {cyclo(Gly)₆–M⁺} (M = Li, Na, K), it can be found that all those complexes keep C₁ symmetry group, and the three cation ions stay in the center of cyclohexapeptide cavity. All the six carbonyl groups on the peptide turn towards the cation. The distance between the cation and the carbonyl oxygen is 0.221 nm, 0.236 nm, and 0.267 nm for Li⁺, Na⁺, and K⁺, respectively.

As for cyclooctopeptide complexes, the conformation changes greatly after forming {cyclo(Gly)₈–M⁺} (M = Li, Na, K). The {cyclo(Gly)₈} in Figure 1 is C₄ symmetry group, and symmetry of {cyclo(Gly)₈–M⁺} (M = Li, Na, K) in Figure 2 degenerates to C₁. The cation was packaged up completely by the cyclooctopeptide because of the larger cavity of the cyclopeptide, and four carbonyl groups turn towards the cation. The average distance between the cation and the carbonyl oxygen is 0.193 nm, 0.241 nm, and 0.280 nm for Li⁺, Na⁺, and K⁺, respectively.

The optimized structures of {cyclo(Gly)_n–X⁻} (n = 4, 6, 8; X = F, Br, Cl) were shown in Figure 3. Each complex has X⁻⋯H–N hydrogen bonds, and all hydrogen atoms on the amino group turn towards the anion in {cyclo(Gly)_n–X⁻} (, 6; X = F, Br, Cl). The complex {cyclo(Gly)₄–X⁻} (X = F, Br, Cl) has C₁ symmetry group like the original cycloquadpeptide. Symmetry group of {cyclo(Gly)₆–X⁻} (X = Br, Cl) is C₆, but, for the {cyclo(Gly)₆–X⁻} (X = F) complex, the symmetry group is C₃ after complexation. The symmetry group of the cyclooctopeptide degenerate from C₄ to C₁ after forming the complex {cyclo(Gly)₈–X⁻} (X = F, Br, Cl).

3.2. Binding Energy and the Distance of the Ion and Cyclopeptide Analysis

Binding energy is a vital standard in evaluating the stability of the complex compound. Table 1 shows the energy and the distance between the cation and the carbonyl oxygen on the cyclopeptide. From the analysis of the data, for the same cyclopeptide, the average distance between cation and the carbonyl oxygen is in the order of K⁺ > Na⁺ > Li⁺; however, the binding energy has the order of Li⁺ > Na⁺ > K⁺ (see Figure 4). It means that the distance between the cation and the cyclopeptide is smaller; the binding energy of the compound is larger. On the other hand, for the same cation in the different cyclopeptide, the binding energy reduced in order of {cyclo(Gly)₈–M⁺} > {cyclo(Gly)₆–M⁺} > {cyclo(Gly)₄ –M⁺}.

Table 2 shows the energies and the distances between the anions and H atoms on the amino groups. The results indicated that, for the same cyclopeptide, the average distance between anion and the amino hydrogen reduced in order of Br⁻ > Cl⁻ > F⁻, and the binding energy increased in the order of Cl⁻ < Br⁻ < F⁻ (Figure 6). For the same anion in the different cyclopeptide, the binding energy reduced in order of {cyclo(Gly)₈–X⁻} > {cyclo(Gly)₆–X⁻} > {cyclo(Gly)₄–X⁻} (X = Br, Cl), but, for X = F, the order is {cyclo(Gly)₆–X⁻} > {cyclo(Gly)₈–X⁻} > {cyclo(Gly)₄–X⁻} due to the strong electrostatic interactions between H and F⁻. Considering the large difference of the binding energy value illustrated in Table 1 and Table 2, the cyclopeptides should have the potential application as ions extractant.

3.3. Mulliken Electron Population

The strength of the covalent bond between the two atoms A and B can be obtained from the Mulliken electron population analysis [27–29]. If the overlapping electron has a large population between A and B, the covalent bond between the two atoms A and B will be stronger, the binding energy will have a larger value, and the compound should be more stable. The electron overlapping populations were shown in Table 3.

It can be found that the electron overlapping population value has the order of cyclo(Gly)_n–Li⁺ > cyclo(Gly)_n–Na⁺ > cyclo(Gly)_n–K⁺ and cyclo(Gly)_n–F⁻ > cyclo(Gly)_n–Br⁻ > cyclo(Gly)_n–Cl⁻. This order is the same as the order of the binding energy (see Figures 5 and 7) and the distance of M⁺–O.

In addition, it is very interesting that the order of the binding energy is cyclo(Gly)_n–F⁻ > cyclo(Gly)_n–Br⁻ > cyclo(Gly)_n–Cl⁻ and the order of the electron overlapping populations is F⁻ > Br⁻ > Cl⁻; this is different from the order of the distance of the X⁻–H and the order of the three atoms F, Cl, and Br in periodic table. Therefore, we carried out the electric quantity calculation of the three halogen ions and cyclopeptides. From the analysis of the data in Table 4, the anion Br⁻ has more electrons than Cl⁻ and the order of the electronic quantity is F⁻ > Br⁻ > Cl⁻. Considering the electrostatic interactions between negatively charged X⁻ and positively charged amino H⁺ atoms, the abnormal order of binding energy can be expected [14, 22].

4. Conclusions

The cyclopeptides as ion nanocarriers for cations (Li⁺, Na⁺, and K⁺) and anions (F⁻, Cl⁻, and Br⁻) were studied carefully by theoretical calculation. The optimum conformation of cation-cyclopeptides and anion-cyclopeptides complexes was obtained by HF/STO-3G method and then further optimized at B3LYP/6-31G level. Both the cation and anion have a strong interaction with the cyclopeptide indicating that the cyclopeptides can act as amphi-ions carriers. The binding energy has the order of cyclo(Gly)_n–Li⁺ > cyclo(Gly)_n–Na⁺ > cyclo(Gly)_n–K⁺ and cyclo(Gly)_n–F⁻ > cyclo(Gly)_n –Br⁻ > cyclo(Gly)_n–Cl⁻ for the different cyclopeptide. For cation ions Li⁺, Na⁺, and K⁺, the binding energy of the different cyclopeptide is {cyclo(Gly)₈–M⁺} > {cyclo(Gly)₆–M⁺} > . For anions Br⁻ and Cl⁻, the binding energy has an order of {Cyclo(Gly)₈–X⁻cyclo(Gly)₆–X⁻cyclo(Gly)₄–X⁻}; for F⁻, {cyclo(Gly)₆–F⁻cyclo(Gly)₈–F⁻cyclo(Gly)₄–F⁻} due to the strong electrostatic interactions between hydrogen bond and F⁻. The different value of the binding energy illustrated that the cyclopeptide should have the potential application as ions extractants.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgments

The work described in this paper was supported by the National Natural Science Foundation of China (no. 21276257) and the Research Foundation for Youth Scholars of Beijing Technology and Business University (no. QNJJ2014-14).

References

S. K. Kim and J. L. Sessler, “Ion pair receptors,” Chemical Society Reviews, vol. 39, no. 10, pp. 3784–3809, 2010.
View at: Publisher Site | Google Scholar
Y. Kobuke, K. Kobubo, and M. Munakata, “Cooperative metal ion binding by metal organized crown ether,” Journal of the American Chemical Society, vol. 117, no. 51, pp. 12751–12758, 1995.
View at: Publisher Site | Google Scholar
C. A. Kozlowski and J. Kozlowska, “PNP-16-crown-6 derivatives as ion carriers for Zn(II), Cd(II) and Pb(II) transport across polymer inclusion membranes,” Journal of Membrane Science, vol. 326, no. 1, pp. 215–221, 2009.
View at: Publisher Site | Google Scholar
M. Tang, J. F. Fan, J. Liu, L. J. He, and K. He, “Applications of cyclic peptide nanotubes,” Progress in Chemistry, vol. 22, no. 4, pp. 648–653, 2010.
View at: Google Scholar
D. Ranganathan, “Designer hybrid cyclopeptides for membrane ion transport and tubular structures,” Accounts of Chemical Research, vol. 34, no. 11, pp. 919–930, 2001.
View at: Publisher Site | Google Scholar
O. Renaudet, G. Dasgupta, I. Bettahi et al., “Linear and branched glyco-lipopeptide vaccines follow distinct cross-presentation pathways and generate different magnitudes of antitumor immunity,” PLoS ONE, vol. 5, no. 6, Article ID e11216, 2010.
View at: Publisher Site | Google Scholar
L. Wanka, K. Iqbal, and P. R. Schreiner, “The lipophilic bullet hits the targets: medicinal chemistry of adamantane derivatives,” Chemical Reviews, vol. 113, no. 5, pp. 3516–3604, 2013.
View at: Publisher Site | Google Scholar
A. Späth and B. Knig, “Molecular recognition of organic ammonium ions in solution using synthetic receptors,” Beilstein Journal of Organic Chemistry, vol. 6, article 32, 2010.
View at: Publisher Site | Google Scholar
D. Ranganathan, A. Thomas, V. Haridas et al., “Design, synthesis, and characterization of a novel family of macrocyclic membrane ion-transporting depsipeptides,” Journal of the American Chemical Society, vol. 120, pp. 11578–11584, 1998.
View at: Google Scholar
C. C. Tong, R. Quesada, J. L. Sessler, and P. A. Gale, “meso-Octamethylcalix[4]pyrrole: an old yet new transmembrane ion-pair transporter,” Chemical Communications, no. 47, pp. 6321–6323, 2008.
View at: Publisher Site | Google Scholar
P. K. Lo and M. S. Wong, “Extended calix[4]arene-based receptors for molecular recognition and sensing,” Sensors, vol. 8, no. 9, pp. 5313–5335, 2008.
View at: Publisher Site | Google Scholar
H. Chen, L. Gu, Y. Yin, K. Koh, and J. Lee, “Molecular recognition of arginine by supramolecular complexation with calixarene crown ether based on surface plasmon resonance,” International Journal of Molecular Sciences, vol. 12, no. 4, pp. 2315–2324, 2011.
View at: Publisher Site | Google Scholar
Y. A. Ovchinnikov and V. T. Ivanov, “Conformational states and biological activity of cyclic peptides,” Tetrahedron, vol. 31, no. 18, pp. 2177–2209, 1975.
View at: Publisher Site | Google Scholar
I. Sainis, D. Fokas, K. Vareli, A. G. Tzakos, V. Kounnis, and E. Briasoulis, “Cyanobacterial cyclopeptides as lead compounds to novel targeted cancer drugs,” Marine Drugs, vol. 8, no. 3, pp. 629–657, 2010.
View at: Publisher Site | Google Scholar
S. Kirmizialtin and R. Elber, “Computational exploration of mobile ion distributions around RNA duplex,” The Journal of Physical Chemistry B, vol. 114, no. 24, pp. 8207–8220, 2010.
View at: Publisher Site | Google Scholar
S. Chowdhury, G. Schatte, and H. B. Kraatz, “A cyclic Fc-histidine conjugate: Synthesis and properties—interactions with alkali metal ions,” European Journal of Inorganic Chemistry, no. 5, pp. 988–993, 2006.
View at: Publisher Site | Google Scholar
A. C. Gucinski, J. Chamot-Rooke, E. Nicol, Á. Somogyi, and V. H. Wysocki, “Structural influences on preferential oxazolone versus diketopiperazine b₂⁺ ion formation for histidine analogue-containing peptides,” The Journal of Physical Chemistry A, vol. 116, no. 17, pp. 4296–4304, 2012.
View at: Publisher Site | Google Scholar
N. Graf and S. J. Lippard, “Redox activation of metal-based prodrugs as a strategy for drug delivery,” Advanced Drug Delivery Reviews, vol. 64, no. 11, pp. 993–1004, 2012.
View at: Publisher Site | Google Scholar
T. G. Flick, W. A. Donald, and E. R. Williams, “Electron capture dissociation of trivalent metal ion-peptide complexes,” Journal of the American Society for Mass Spectrometry, vol. 24, no. 2, pp. 193–201, 2013.
View at: Publisher Site | Google Scholar
H. Tan, W. Qu, G. Chen, and R. Liu, “Theoretical investigation of the self-assembly of cyclo[(-β³-HGly)₄-],” Chemical Physics Letters, vol. 369, no. 5-6, pp. 556–562, 2003.
View at: Publisher Site | Google Scholar
H. Huang, L. Mu, J. He, and J.-P. Cheng, “A cystine-bearing pseudo-cyclopeptide as a new amphi-receptor,” Tetrahedron Letters, vol. 43, no. 12, pp. 2255–2258, 2002.
View at: Publisher Site | Google Scholar
K. S. Kim, C. Cui, and S. J. Cho, “Novel amphi-ionophores,” The Journal of Physical Chemistry B, vol. 102, no. 2, pp. 461–463, 1998.
View at: Google Scholar
Y. Zhu, M. Tang, X. Shi, and Y. Zhao, “Quantum chemical study of cyclic dipeptides,” International Journal of Quantum Chemistry, vol. 107, no. 3, pp. 745–753, 2007.
View at: Publisher Site | Google Scholar
M. J. Frisch, G. W. Trucks, H. B. Schlegel et al., Gaussian 03, revision C.02, Gaussian, Inc., Wallingford, Conn, USA, 2004.
A. D. Becke, “Density-functional exchange-energy approximation with correct asymptotic behavior,” The Journal of Chemical Physics, vol. 98, pp. 5648–5652, 1993.
View at: Google Scholar
C. Lee, W. Yang, and R. G. Parr, “Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density,” Physical Review B, vol. 37, no. 2, pp. 785–789, 1988.
View at: Publisher Site | Google Scholar
R. S. Mulliken, “Electronic population analysis on LCAO–MO molecular wave functions. I,” The Journal of Chemical Physics, vol. 23, no. 10, pp. 1833–1840, 1955.
View at: Publisher Site | Google Scholar
G. Scalmani and V. Barone, “Use of molecular symmetry in the computation of solvation energies and their analytical derivatives by the polarizable continuum model,” Chemical Physics Letters, vol. 301, no. 3-4, pp. 263–269, 1999.
View at: Publisher Site | Google Scholar
M. W. Wong, B. K. Wiberg, and M. J. Frisch, “Medium effect on the structure, energy, charge density, and vibrational frequencies of sulfamic acid,” Journal of the American Chemical Society, vol. 114, pp. 523–529, 1992.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2015 Lili Liu and Shimou Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1379

Downloads

1007

Citations