Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 612029, 14 pages
http://dx.doi.org/10.1155/2015/612029
Research Article

Interface Shear Actions and Mechanical Properties of Nanostructured Dissimilar Al Alloy Laminated Metal Composites

1State Key Laboratory of Mechanical Transmission, College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
2State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, Hebei 066004, China
3WISDRI Engineering and Research Incorporation Limited, Wuhan, Hubei 430223, China

Received 20 June 2015; Revised 30 August 2015; Accepted 5 October 2015

Academic Editor: Hanadi Salem

Copyright © 2015 Zejun Chen and Quanzhong Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Z. Valiev, “Structure and mechanical properties of ultrafine-grained metals,” Materials Science and Engineering A, vol. 234, no. 97, pp. 59–66, 1997. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Z. Valiev, Y. Estrin, Z. Horita, T. G. Langdon, M. J. Zehetbauer, and Y. T. Zhu, “Producing bulk ultrafine-grained materials by severe plastic deformation,” JOM, vol. 58, no. 4, pp. 33–39, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Z. Valiev and T. G. Langdon, “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Progress in Materials Science, vol. 51, no. 7, pp. 881–981, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Jamaati, M. R. Toroghinejad, H. Edris, and M. R. Salmani, “Fabrication of nano/ultra-fine grained IF steel via SPD processes: a review,” Transactions of the Indian Institute of Metals, vol. 67, no. 6, pp. 787–802, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. L. S. Toth and C. Gu, “Ultrafine-grain metals by severe plastic deformation,” Materials Characterization, vol. 92, pp. 1–14, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. A. M. El-Sherik and U. Erb, “Synthesis of bulk nanocrystalline nickel by pulsed electrodeposition,” Journal of Materials Science, vol. 30, no. 22, pp. 5743–5749, 1995. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Hahn, “Unique features and properties of nanostructured materials,” Advanced Engineering Materials, vol. 5, no. 5, pp. 277–284, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Z. Valiev and I. V. Alexandrov, “Nanostructured materials from severe plastic deformation,” Nanostructured Materials, vol. 12, no. 1–4, pp. 35–40, 1999. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, “Bulk nanostructured materials from severe plastic deformation,” Progress in Materials Science, vol. 45, no. 2, pp. 103–189, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Azushima, R. Kopp, A. Korhonen et al., “Severe plastic deformation (SPD) processes for metals,” CIRP Annals: Manufacturing Technology, vol. 57, no. 2, pp. 716–735, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. V. M. Segal, “Severe plastic deformation: simple shear versus pure shear,” Materials Science & Engineering A, vol. 338, no. 1-2, pp. 331–344, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R. G. Hong, “Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process,” Scripta Materialia, vol. 39, no. 9, pp. 1221–1227, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai, “Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process,” Acta Materialia, vol. 47, no. 2, pp. 579–583, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Roy, B. R. Nataraj, S. Suwas, S. Kumar, and K. Chattopadhyay, “Accumulative roll bonding of aluminum alloys 2219/5086 laminates: microstructural evolution and tensile properties,” Materials and Design, vol. 36, pp. 529–539, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Chino, K. Sassa, and M. Mabuchi, “Enhancement of tensile ductility of magnesium alloy produced by torsion extrusion,” Scripta Materialia, vol. 59, no. 4, pp. 399–402, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Pardis, B. Talebanpour, R. Ebrahimi, and S. Zomorodian, “Cyclic expansion-extrusion (CEE): a modified counterpart of cyclic extrusion-compression (CEC),” Materials Science & Engineering A, vol. 528, no. 25-26, pp. 7537–7540, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Nakamura, K. Neishi, K. Kaneko, M. Nakagaki, and Z. Horita, “Development of severe torsion straining process for rapid continuous grain refinement,” Materials Transactions, vol. 45, no. 12, pp. 3338–3342, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Etou, S. Fukushima, T. Sasaki et al., “Super short interval multi-pass rolling process for ultrafinegrained hot strip,” ISIJ International, vol. 48, no. 8, pp. 1142–1147, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. T. C. Lowe and R. Z. Valiev, “Investigations and applications of severe plastic deformation—introduction,” Nato Science, vol. 80, no. 80, pp. 13–19, 2000. View at Google Scholar
  20. D. J. Alexander, “New methods for severe plastic deformation processing,” Journal of Materials Engineering and Performance, vol. 16, no. 3, pp. 360–374, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Karlík, P. Homola, and M. Slámová, “Accumulative roll-bonding: first experience with a twin-roll cast AA8006 alloy,” Journal of Alloys and Compounds, vol. 378, no. 1-2, pp. 322–325, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Z. Quadir, M. Ferry, O. Al-Buhamad, and P. R. Munroe, “Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding,” Acta Materialia, vol. 57, no. 1, pp. 29–40, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. M. R. Toroghinejad, R. Jamaati, M. Hoseini, J. A. Szpunar, and J. Dutkiewicz, “Texture evolution of nanostructured aluminum/copper composite produced by the accumulative roll bonding and folding process,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, no. 3, pp. 1587–1598, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Min, J.-M. Lee, S.-B. Kang, and H.-W. Kim, “Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process,” Materials Letters, vol. 60, no. 27, pp. 3255–3259, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Mozaffari, H. Manesh, and K. Janghorban, “Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process,” Journal of Alloys and Compounds, vol. 489, no. 1, pp. 103–109, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. R. N. Dehsorkhi, F. Qods, and M. Tajally, “Investigation on microstructure and mechanical properties of Al-Zn composite during accumulative roll bonding (ARB) process,” Materials Science and Engineering A, vol. 530, no. 1, pp. 63–72, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. D. Yang, P. Cizek, P. Hodgson, and C. Wen, “Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding,” Scripta Materialia, vol. 62, no. 5, pp. 321–324, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. H. P. Ng, T. Przybilla, C. Schmidt et al., “Asymmetric accumulative roll bonding of aluminium-titanium composite sheets,” Materials Science and Engineering: A, vol. 576, pp. 306–315, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. S.-Y. Gu, H.-M. Fang, Z.-C. Zhou, and J. Du, “The evolution of microstructure and mechanical properties of Ti/Al composite synthesized by accumulative roll-bonding,” Acta Physica Sinica, vol. 61, no. 18, Article ID 186104, 2012. View at Google Scholar · View at Scopus
  30. S. Ohsaki, S. Kato, N. Tsuji, T. Ohkubo, and K. Hono, “Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process,” Acta Materialia, vol. 55, no. 8, pp. 2885–2895, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Tayyebi and B. Eghbali, “Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding,” Materials Science and Engineering A, vol. 559, pp. 759–764, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. M. C. Chen, H. C. Hsieh, and W. Wu, “The evolution of microstructures and mechanical properties during accumulative roll bonding of Al/Mg composite,” Journal of Alloys and Compounds, vol. 416, no. 1-2, pp. 169–172, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. H. S. Liu, B. Zhang, and G. P. Zhang, “Microstructures and mechanical properties of Al/Mg alloy multilayered composites produced by accumulative roll bonding,” Journal of Materials Science & Technology, vol. 27, no. 1, pp. 15–21, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. X. P. Zhang, T. H. Yang, S. Castagne, and J. T. Wang, “Microstructure; bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling,” Materials Science and Engineering A: Structural Materials Properties Microstructure And Processing, vol. 528, no. 4-5, pp. 1954–1960, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. H. Chang, M. Y. Zheng, W. M. Gan, K. Wu, E. Maawad, and H. G. Brokmeier, “Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding,” Scripta Materialia, vol. 61, no. 7, pp. 717–720, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. K. Wu, H. Chang, E. Maawad, W. M. Gan, H. G. Brokmeier, and M. Y. Zheng, “Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB),” Materials Science and Engineering: A, vol. 527, no. 13-14, pp. 3073–3078, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. T. Hausöl, H. W. Höppel, and M. Göken, “Ultrafine-grained AA6014/AA5754 laminates produced by accumulative roll bonding (ARB),” Materialwissenschaft und Werkstofftechnik, vol. 43, no. 4, pp. 334–339, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. I. Topic, H. W. Höppel, D. Staud, M. Merklein, M. Geiger, and M. Göken, “Formability of accumulative roll bonded aluminum AA1050 and AA6016 investigated using bulge tests,” Advanced Engineering Materials, vol. 10, no. 12, pp. 1101–1109, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. L. H. Su, C. Lu, G. Y. Deng, K. Tieu, and X. D. Sun, “Microstructure and mechanical properties of 1050/6061 laminated composite processed by accumulative roll bonding,” Reviews on Advanced Materials Science, vol. 33, no. 1, pp. 33–37, 2013. View at Google Scholar · View at Scopus
  40. L. Su, C. Lu, G. Deng, and K. Tieu, “Microstructure and mechanical properties of AA5005/AA6061 laminated composite processed by accumulative roll bonding,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 45, no. 2, pp. 515–522, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. L. Su, C. Lu, A. K. Tieu, G. Deng, and X. Sun, “Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding,” Materials Science and Engineering A—Structural Materials Properties Microstructure and Processing, vol. 559, pp. 345–351, 2013. View at Publisher · View at Google Scholar · View at Scopus
  42. S. Roy, B. R. Nataraj, S. Suwas, S. Kumar, and K. Chattopadhyay, “Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 composite laminates,” Journal of Materials Science, vol. 47, no. 17, pp. 6402–6419, 2012. View at Publisher · View at Google Scholar · View at Scopus
  43. M. Talebian and M. Alizadeh, “Manufacturing Al/steel multilayered composite by accumulative roll bonding and the effects of subsequent annealing on the microstructural and mechanical characteristics,” Materials Science and Engineering A, vol. 590, pp. 186–193, 2014. View at Publisher · View at Google Scholar · View at Scopus
  44. J. S. Carpenter, S. C. Vogel, J. E. Ledonne, D. L. Hammon, I. J. Beyerlein, and N. A. Mara, “Bulk texture evolution of Cu-Nb nanolamellar composites during accumulative roll bonding,” Acta Materialia, vol. 60, no. 4, pp. 1576–1586, 2012. View at Publisher · View at Google Scholar · View at Scopus
  45. J. S. Carpenter, T. Nizolek, R. J. McCabe et al., “Bulk texture evolution of nanolamellar Zr-Nb composites processed via accumulative roll bonding,” Acta Materialia, vol. 92, pp. 97–108, 2015. View at Publisher · View at Google Scholar
  46. A. Shabani, M. R. Toroghinejad, and A. Shafyei, “Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties,” Materials Science and Engineering: A, vol. 558, pp. 386–393, 2012. View at Publisher · View at Google Scholar · View at Scopus
  47. K. Zhang, G.-Y. Qin, S.-Y. Xu, J.-X. Guo, and G. Ma, “Preparation of Ag-Ni-Cu composite material by ultrasonic arc spray forming and accumulative roll bonding and the evolution of its microstructure,” Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 46, no. 2, pp. 880–886, 2015. View at Publisher · View at Google Scholar · View at Scopus
  48. Z. Chen, Q. Chen, Q. Liu, Z. Zhou, and G. Wang, “Fabrication and mechanical properties of ultrafine structured dissimilar laminated metal composite sheets (LMCS),” Science and Engineering of Composite Materials, vol. 22, no. 1, pp. 71–79, 2015. View at Publisher · View at Google Scholar · View at Scopus
  49. Z. Chen, X. Wu, H. Hu, Q. Chen, and Q. Liu, “Effect of individual layer shape on the mechanical properties of dissimilar al alloys laminated metal composite sheets,” Journal of Materials Engineering and Performance, vol. 23, no. 3, pp. 990–1001, 2014. View at Publisher · View at Google Scholar · View at Scopus
  50. T. Hausöl, H. W. Höppel, and M. Göken, “Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets,” Journal of Materials Science, vol. 45, no. 17, pp. 4733–4738, 2010. View at Publisher · View at Google Scholar · View at Scopus
  51. N. V. Govindaraj, J. G. Frydendahl, and B. Holmedal, “Layer continuity in accumulative roll bonding of dissimilar material combinations,” Materials & Design, vol. 52, pp. 905–915, 2013. View at Publisher · View at Google Scholar · View at Scopus
  52. Ö. Yazar, T. Ediz, and T. Öztürk, “Control of macrostructure in deformation processing of metal/metal laminates,” Acta Materialia, vol. 53, no. 2, pp. 375–381, 2005. View at Publisher · View at Google Scholar · View at Scopus
  53. X. Gómez and J. Echeberria, “Microstructure and mechanical properties of carbon steel A210-superalloy Sanicro 28 bimetallic tubes,” Materials Science and Engineering: A, vol. 348, no. 1-2, pp. 180–191, 2003. View at Publisher · View at Google Scholar · View at Scopus
  54. J.-M. Lee, B.-R. Lee, and S.-B. Kang, “Control of layer continuity in metallic multilayers produced by deformation synthesis method,” Materials Science and Engineering A, vol. 406, no. 1-2, pp. 95–101, 2005. View at Publisher · View at Google Scholar · View at Scopus
  55. P. Paupler, “G. E. Dieter. Mechanical Metallurgy. 3rd ed., Mc Graw-Hill Book Co., New York 1986,” Crystal Research and Technology, vol. 23, no. 2, p. 194, 1988. View at Publisher · View at Google Scholar
  56. A. Misra, M. Verdier, Y. C. Lu et al., “Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites,” Scripta Materialia, vol. 39, no. 4-5, pp. 555–560, 1998. View at Publisher · View at Google Scholar · View at Scopus
  57. P. H. Shingu, K. N. Ishihara, A. Otsuki, and I. Daigo, “Nano-scaled multi-layered bulk materials manufactured by repeated pressing and rolling in the Cu-Fe system,” Materials Science and Engineering A, vol. 304, no. 1-2, pp. 399–402, 2001. View at Publisher · View at Google Scholar · View at Scopus
  58. A. Y. Chen, Y. K. Li, J. B. Zhang, D. Pan, and J. Lu, “The influence of interface structure on nanocrystalline deformation of a layered and nanostructured steel,” Materials & Design, vol. 47, pp. 316–322, 2013. View at Publisher · View at Google Scholar · View at Scopus
  59. J. Wadsworth and D. R. Lesuer, “Ancient and modern laminated composites—from the Great Pyramid of Gizeh to Y2K,” Materials Characterization, vol. 45, no. 4-5, pp. 289–313, 2000. View at Publisher · View at Google Scholar · View at Scopus
  60. C. M. Cepeda-Jiménez, M. Pozuelo, O. A. Ruano, and F. Carreño, “Influence of the thermomechanical processing on the fracture mechanisms of high strength aluminium/pure aluminium multilayer laminate materials,” Materials Science and Engineering A, vol. 490, no. 1-2, pp. 319–327, 2008. View at Publisher · View at Google Scholar · View at Scopus
  61. C. M. Cepeda-Jiménez, J. M. García-Infanta, M. Pozuelo, O. A. Ruano, and F. Carreño, “Impact toughness improvement of high-strength aluminium alloy by intrinsic and extrinsic fracture mechanisms via hot roll bonding,” Scripta Materialia, vol. 61, no. 4, pp. 407–410, 2009. View at Publisher · View at Google Scholar · View at Scopus