Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 926809, 6 pages
http://dx.doi.org/10.1155/2015/926809
Research Article

Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

1Center for C-Industry Incubation, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong, Daejeon 305-600, Republic of Korea
2Department of Civil Engineering, Kunsan National University, San 68 Miryong-dong, Kunsan, Chollabuk-do 573-701, Republic of Korea
3Department of Civil and Environmental Engineering, The University of Texas at San Antonio, One UTSA Circle, San Antonio, TX 78249-0668, USA

Received 29 December 2014; Revised 6 May 2015; Accepted 24 May 2015

Academic Editor: Xuping Sun

Copyright © 2015 Byong Chol Bai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. B. Edwards, “Weather-related road accidents in England and Wales: a spatial analysis,” Journal of Transport Geography, vol. 4, no. 3, pp. 201–212, 1996. View at Publisher · View at Google Scholar · View at Scopus
  2. F. Hutchison, “Environmental pollution from highway deicing on highways,” Journal of Soil and Water Conservation, vol. 25, no. 4, pp. 144–146, 1970. View at Google Scholar
  3. H. Wang, J. Zhao, and Z. Chen, “Experimental investigation of ice and snow melting process on pavement utilizing geothermal tail water,” Energy Conversion and Management, vol. 49, no. 6, pp. 1538–1546, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. Q. Liu, E. Schlangen, Á. García, and M. van de Ven, “Induction heating of electrically conductive porous asphalt concrete,” Construction and Building Materials, vol. 24, no. 7, pp. 1207–1213, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Vaidya and E. N. Allouche, “Experimental evaluation of electrical conductivity of carbon fiber reinforced fly-ash based geopolymer,” Smart Structures and Systems, vol. 7, no. 1, pp. 27–40, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. D. W. Park, S. Dessouky, and S. D. Hwang, “Thermo-physical properties of graphite-modified asphalt mixture and numerical analyses for snow melting pavement,” in Sustainability, Eco-Efficiency, and Conservation in Transportation Infrastructure Asset Management, pp. 87–94, CRC Press, Pisa, Italy, 2014. View at Publisher · View at Google Scholar
  7. S. Wu, L. Mo, Z. Shui, and Z. Chen, “Investigation of the conductivity of asphalt concrete containing conductive fillers,” Carbon, vol. 43, no. 7, pp. 1358–1363, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. H. V. Vo, D. Park, and S. Dessouky, “Simulation of snow melting pavement performance using measured thermal properties of graphite-modified asphalt mixture,” Road Materials and Pavement Design, 2015. View at Publisher · View at Google Scholar
  9. F. L. Roberts, P. S. Kandhal, E. R. Brown, D. Y. Lee, and T. W. Kennedy, Hot Mix Asphalt Materials, Mixture Design, and Construction, National Asphalt Pavement Association Education Foundation, Lanham, Md, USA, 1996.
  10. Korea Standard (KS), “Standard test method for specific bulk gravity of compacted asphalt mixtures,” KS F2353, Korea Standard Information Center, 2010. View at Google Scholar
  11. ASTM International, “Standard test method for determination of thermal conductivity of soil and soft rock by thermal needle probe procedure,” ASTM D5334-08, ASTM International, West Conshohocken, Pa, USA, 2008. View at Google Scholar