Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 978562, 8 pages
http://dx.doi.org/10.1155/2015/978562
Research Article

Screen-Printed Flexible Bandstop Filter on Polyethylene Terephthalate Substrate Based on Ag Nanoparticles

1Department of Electronic Engineering, Kwangwoon University, Nowon-gu, Seoul 139-701, Republic of Korea
2Department of Printed Electronics and Chemical Engineering, Sunchon National University, Sunchon, Jeonnam 540-742, Republic of Korea

Received 19 June 2015; Revised 4 September 2015; Accepted 15 September 2015

Academic Editor: Bhupendra K. Sharma

Copyright © 2015 Rajendra Dhakal et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Wu, Y. Shim, and M. Rais-Zadeh, “Miniaturized UWB filters integrated with tunable notch filters using a silicon-based integrated passive device technology,” IEEE Transactions on Microwave Theory and Techniques, vol. 60, no. 3, pp. 518–527, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. C.-Y. Hsiao, S. S. H. Hsu, and D.-C. Chang, “A compact V-band bandpass filter in IPD technology,” IEEE Microwave and Wireless Components Letters, vol. 21, no. 10, pp. 531–533, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Jung, H. Park, J.-A. Park et al., “Fully printed flexible and disposable wireless cyclic voltammetry tag,” Scientific Reports, vol. 5, article 8105, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Park, H. Kang, Y. Lee, Y. Park, J. Noh, and G. Cho, “Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz,” Nanotechnology, vol. 23, no. 34, Article ID 344006, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Noh, M. Jung, K. Jung et al., “Fully gravure-printed D flip-flop on plastic foils using single-walled carbon-nanotube-based TFTs,” IEEE Electron Device Letters, vol. 32, no. 5, pp. 638–640, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. L.-L. Qu, D.-W. Li, J.-Q. Xue, W.-L. Zhai, J. S. Fossey, and Y.-T. Long, “Batch fabrication of disposable screen printed SERS arrays,” Lab on a Chip, vol. 12, no. 5, pp. 876–881, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Amin, Q. Chen, L. R. Zheng, and H. Tenhunen, “Development and analysis of flexible UHF antennas for green electronics,” Progress in Electromagnetics Research, vol. 130, pp. 1–15, 2012. View at Publisher · View at Google Scholar
  8. S. M. Bidoki, D. M. Lewis, M. Clark, A. Vakorov, P. A. Millner, and D. McGorman, “Ink-jet fabrication of electronic components,” Journal of Micromechanics and Microengineering, vol. 17, no. 5, pp. 967–974, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Kedawat, B. K. Gupta, P. Kumar et al., “Fabrication of a flexible UV band-pass filter using surface plasmon metal-polymer nanocomposite films for promising laser applications,” ACS Applied Materials & Interfaces, vol. 6, no. 11, pp. 8407–8414, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. V. K. Velidi, A. B. Guntupalli, and S. Sanyal, “Sharp-rejection ultra-wide bandstop filters,” IEEE Microwave and Wireless Components Letters, vol. 19, no. 8, pp. 503–505, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Shrestha and N. Y. Kim, “Microstrip wideband bandstop filter with open stubs for UWB applications,” Microwave and Optical Technology Letters, vol. 57, no. 4, pp. 1003–1006, 2015. View at Publisher · View at Google Scholar
  12. R. K. Maharjan, B. Shrestha, and N. Y. Kim, “Compact microstrip square open-loop bandpass filter using open stub,” Electronics Letters, vol. 48, no. 6, pp. 333–334, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. N. Janković, R. Geschke, and V. Crnojević-Bengin, “Compact tri-band bandpass and bandstop filters based on Hilbert-fork resonators,” IEEE Microwave and Wireless Components Letters, vol. 23, no. 6, pp. 282–284, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. E. J. Naglich, J. Lee, D. Peroulis, and W. J. Chappell, “A tunable bandpass-to-bandstop reconfigurable filter with independent bandwidths and tunable response shape,” IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 12, pp. 3770–3779, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Dhakal and N.-Y. Kim, “A compact symmetric microstrip filter based on a rectangular meandered-line stepped impedance resonator with a triple-band bandstop response,” The Scientific World Journal, vol. 2013, Article ID 457693, 7 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Dhakal and N.-Y. Kim, “A compact dual-band bandstop filter using a circular, folded, symmetric, meandered-line, stepped-impedance resonator,” Microwave and Optical Technology Letters, vol. 56, no. 10, pp. 2298–2301, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Lan, Y. Xu, C. Wang et al., “X-band flexible bandpass filter based on ultra-thin liquid crystal polymer substrate,” Electronics Letters, vol. 51, no. 4, pp. 345–347, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. Ł. Tymecki, E. Zwierkowska, and R. Koncki, “Screen-printed reference electrodes for potentiometric measurements,” Analytica Chimica Acta, vol. 526, no. 1, pp. 3–11, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. J.-S. Kim, K.-B. Lee, J.-Y. Lee, H.-J. Lee, and H. Shin, “A 2.4-GHz bandpass filter for flexible RF applications,” Microwave and Optical Technology Letters, vol. 54, no. 2, pp. 384–387, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Gomez-Garcia, M.-A. Sanchez-Soriano, K.-W. Tam, and Q. Xue, “Flexible filters: reconfigurable-bandwidth bandpass planar filters with ultralarge tuning ratio,” IEEE Microwave Magazine, vol. 15, no. 5, pp. 43–54, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Takano, T. Kawabata, C.-F. Hsieh et al., “Fabrication of terahertz planar metamaterials using a super-fine ink-jet printer,” Applied Physics Express, vol. 3, no. 1, Article ID 016701, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Waldow and I. Wolff, “The skin-effect at high frequencies,” IEEE Transactions on Microwave Theory and Techniques, vol. 33, no. 10, pp. 1076–1082, 1985. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Chen, “EM modeling of microstrip conductor losses including surface roughness effect,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 2, pp. 94–96, 2007. View at Publisher · View at Google Scholar · View at Scopus