Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2016, Article ID 2358276, 9 pages
http://dx.doi.org/10.1155/2016/2358276
Research Article

Inorganic Antiflaming Wood Caused by a -Decorated ZnO Nanorod Arrays Coating Prepared by a Facile Hydrothermal Method

1School of Engineering, Zhejiang A&F University, Lin’an, China
2Key Laboratory of Wood Science and Technology, Lin’an, China

Received 30 March 2016; Revised 8 June 2016; Accepted 31 August 2016

Academic Editor: Yogendra Mishra

Copyright © 2016 Hong Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Kumar, “Chemical modification of wood,” Wood and Fiber Science, vol. 26, pp. 270–280, 1994. View at Google Scholar
  2. V. Babrauskas, “Charring rate of wood as a tool for fire investigations,” Fire Safety Journal, vol. 40, no. 6, pp. 528–554, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Michael and P. Smith, “Satisfying consumers' ‘Green’ wants: an impetus for education,” Wood and Fiber Science, vol. 26, no. 3, pp. 370–381, 1994. View at Google Scholar
  4. Q. Sun, H. Yu, Y. Liu, J. Li, Y. Cui, and Y. Lu, “Prolonging the combustion duration of wood by TiO2 coating synthesized using cosolvent-controlled hydrothermal method,” Journal of Materials Science, vol. 45, no. 24, pp. 6661–6667, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. Q. F. Sun, Y. Lu, H. M. Zhang et al., “Flame retardancy of wood coated by ZnO nanorod arrays via a hydrothermal method,” Materials Research Innovations, vol. 16, no. 5, pp. 326–331, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Mryafuji and S. Saka, “Fire-resisting properties in several TiO2 wood-inorganic composites and their topochemistry,” Wood Science and Technology, vol. 31, no. 6, pp. 449–455, 1997. View at Google Scholar · View at Scopus
  7. M. Lewin, “Unsolved problems and unanswered questions in flame retardance of polymers,” Polymer Degradation and Stability, vol. 88, no. 1, pp. 13–19, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. G. N. Inari, M. Pétrissans, A. Pétrissans, and P. Gérardin, “Elemental composition of wood as a potential marker to evaluate heat treatment intensity,” Polymer Degradation and Stability, vol. 94, no. 3, pp. 365–368, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. M.-J. Chung, S.-S. Cheng, C.-J. Lee, and S.-T. Chang, “Novel environmentally-benign methods for green-colour protection of bamboo culms and leaves,” Polymer Degradation and Stability, vol. 96, no. 4, pp. 541–546, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Bourbigot and S. Duquesne, “Fire retardant polymers: recent developments and opportunities,” Journal of Materials Chemistry, vol. 17, no. 22, pp. 2283–2300, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Giancaspro, P. Balaguru, and R. Lyon, “Fire protection of flammable materials utilizing geopolymer,” SAMPE Journal, vol. 40, no. 5, pp. 42–49, 2004. View at Google Scholar · View at Scopus
  12. D. Katović, S. B. Vukušić, S. F. Grgac, J. Trajković, and V. Jirouš-Rajković, “Organophosphorus compounds for fire retardancy of wood,” Wood Research, vol. 50, no. 2, pp. 59–66, 2005. View at Google Scholar · View at Scopus
  13. F. A. Ximenes and P. D. Evans, “Protection of wood using oxy-aluminum compounds,” Forest Products Journal, vol. 56, no. 11-12, pp. 116–122, 2006. View at Google Scholar · View at Scopus
  14. S. Hamdani, C. Longuet, D. Perrin, J.-M. Lopez-Cuesta, and F. Ganachaud, “Flame retardancy of silicone-based materials,” Polymer Degradation and Stability, vol. 94, no. 4, pp. 465–495, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Hribernik, M. S. Smole, K. S. Kleinschek, M. Bele, J. Jamnik, and M. Gaberscek, “Flame retardant activity of SiO2-coated regenerated cellulose fibres,” Polymer Degradation and Stability, vol. 92, no. 11, pp. 1957–1965, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Baysal, M. Altinok, M. Colak, S. K. Ozaki, and H. Toker, “Fire resistance of Douglas fir (Pseudotsuga menzieesi) treated with borates and natural extractives,” Bioresource Technology, vol. 98, no. 5, pp. 1101–1105, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Hagen, J. Hereid, M. A. Delichatsios, J. Zhang, and D. Bakirtzis, “Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry,” Fire Safety Journal, vol. 44, no. 8, pp. 1053–1066, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Harada, “Progress toward the development of fire-resistant wooden structures in Japan,” Mokuzai Gakkaishi, vol. 55, no. 1, pp. 1–9, 2009. View at Publisher · View at Google Scholar
  19. S. Pavlidou and C. D. Papaspyrides, “A review on polymer-layered silicate nanocomposites,” Progress in Polymer Science, vol. 33, no. 12, pp. 1119–1198, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Beyer, “Nanocomposites offer new way forward for flame retardants,” Plastics, Additives and Compounding, vol. 7, no. 5, pp. 32–35, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Fischer, “Polymer nanocomposites: from fundamental research to specific applications,” Materials Science and Engineering C, vol. 23, no. 6-8, pp. 763–772, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Saxena, R. K. Morchhale, P. Asokan, and B. K. Prasad, “Plant fiber—industrial waste reinforced polymer composites as a potential wood substitute material,” Journal of Composite Materials, vol. 42, no. 4, pp. 367–384, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. X.-Y. Ma and W.-D. Zhang, “Effects of flower-like ZnO nanowhiskers on the mechanical, thermal and antibacterial properties of waterborne polyurethane,” Polymer Degradation and Stability, vol. 94, no. 7, pp. 1103–1109, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. D. Yang, S. Sarina, H. Zhu et al., “Capture of radioactive cesium and iodide ions from water by using titanate nanofibers and nanotubes,” Angewandte Chemie—International Edition, vol. 50, no. 45, pp. 10594–10598, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. D. S. Kim and S.-Y. Kwak, “The hydrothermal synthesis of mesoporous TiO2 with high crystallinity, thermal stability, large surface area, and enhanced photocatalytic activity,” Applied Catalysis A: General, vol. 323, pp. 110–118, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. X. Chen and S. S. Mao, “Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications,” Chemical Reviews, vol. 107, no. 7, pp. 2891–2959, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. C. F. Klingshirn, “ZnO: material, physics and applications,” ChemPhysChem, vol. 8, no. 6, pp. 782–803, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. Ü. Özgür, Y. I. Alivov, C. Liu et al., “A comprehensive review of ZnO materials and devices,” Journal of Applied Physics, vol. 98, no. 4, Article ID 041301, 103 pages, 2005. View at Publisher · View at Google Scholar
  29. V. Devi, M. Kumar, R. Kumar, and B. C. Joshi, “Effect of substrate temperature and oxygen partial pressure on structural and optical properties of Mg doped ZnO thin films,” Ceramics International, vol. 41, no. 5, pp. 6269–6273, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. V. Devi, M. Kumar, R. Kumar, A. Singh, and B. C. Joshi, “Band offset measurements in Zn1-xSbxO/ZnO hetero-junction,” Journal of Physics D: Applied Physics, vol. 48, no. 33, Article ID 335103, 2015. View at Publisher · View at Google Scholar
  31. M. S. Roy, P. Balraju, M. Kumar, and G. D. Sharma, “Dye-sensitized solar cell based on Rose Bengal dye and nanocrystalline TiO2,” Solar Energy Materials and Solar Cells, vol. 92, no. 8, pp. 909–913, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. M. L. Singla, M. Shafeeq M, and M. Kumar, “Optical characterization of ZnO nanoparticles capped with various surfactants,” Journal of Luminescence, vol. 129, no. 5, pp. 434–438, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. B. Mahltig, C. Swaboda, A. Roessler, and H. Bottcher, “Functionalising wood by nanosol application,” Journal of Materials Chemistry, vol. 18, pp. 3180–3192, 2008. View at Publisher · View at Google Scholar
  34. H. Miyafuji and S. Saka, “Wood-inorganic composites prepared by the sol-gel process .5. Fire-resisting properties of the SiO2-P2O5-B2O3 wood-inorganic composites,” Mokuzai Gakkaishi, vol. 42, no. 1, pp. 74–80, 1996. View at Google Scholar
  35. V. Blanchard and P. Blanchet, “Color stability for wood products during use: effects of inorganic nanoparticles,” BioResources, vol. 6, no. 2, pp. 1219–1229, 2011. View at Google Scholar · View at Scopus
  36. C. A. Clausen, F. Green III, and S. N. Kartal, “Weatherability and leach resistance of wood impregnated with nano-zinc oxide,” Nanoscale Research Letters, vol. 5, no. 9, pp. 1464–1467, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. S. L. Wang, J. Y. Shi, C. Y. Liu, C. Xie, and C. Y. Wang, “Fabrication of a superhydrophobic surface on a wood substrate,” Applied Surface Science, vol. 257, no. 22, pp. 9362–9365, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. F. Weichelt, R. Emmler, R. Flyunt, E. Beyer, M. R. Buchmeiser, and M. Beyer, “ZnO-based UV nanocomposites for wood coatings in outdoor applications,” Macromolecular Materials and Engineering, vol. 295, no. 2, pp. 130–136, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. M. A. Tshabalala and J. E. Gangstad, “Accelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition,” Journal of Coatings Technology, vol. 75, no. 943, pp. 37–43, 2003. View at Google Scholar · View at Scopus
  40. O. Grexa and H. Lübke, “Flammability parameters of wood tested on a cone calorimeter,” Polymer Degradation and Stability, vol. 74, no. 3, pp. 427–432, 2001. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Kumar, R. C. Gupta, and T. Sharma, “X-ray diffraction studies of Acacia and Eucalyptus wood chars,” Journal of Materials Science, vol. 28, no. 3, pp. 805–810, 1993. View at Publisher · View at Google Scholar
  42. T. Paakkari and R. Serimaa, “A study of the structure of wood cells by x-ray diffraction,” Wood Science and Technology, vol. 18, no. 2, pp. 79–85, 1984. View at Publisher · View at Google Scholar · View at Scopus
  43. M.-P. Sarén and R. Serimaa, “Determination of microfibril angle distribution by X-ray diffraction,” Wood Science and Technology, vol. 40, no. 6, pp. 445–460, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. M. Kalliat, C. Y. Kwak, P. W. Schmidt, B. E. Cutter, and E. A. McGinnes, “Small angle X-ray scattering measurement of porosity in wood following pyrolysis,” Wood Science and Technology, vol. 17, no. 4, pp. 241–257, 1983. View at Publisher · View at Google Scholar · View at Scopus
  45. L. J. Goff, “Investigation of polymeric materials using the cone calorimeter,” Polymer Engineering and Science, vol. 33, no. 8, pp. 497–500, 1993. View at Publisher · View at Google Scholar · View at Scopus
  46. N. M. Stark, R. H. White, and C. M. Clemons, “Heat release rate of wood-plastic composites,” SAMPE Journal, vol. 33, no. 5, pp. 26–31, 1997. View at Google Scholar · View at Scopus
  47. L. Jing, Z. Xu, X. Sun, J. Shang, and W. Cai, “The surface properties and photocatalytic activities of ZnO ultrafine particles,” Applied Surface Science, vol. 180, no. 3-4, pp. 308–314, 2001. View at Publisher · View at Google Scholar · View at Scopus
  48. C. Wöll, “The chemistry and physics of zinc oxide surfaces,” Progress in Surface Science, vol. 82, no. 2-3, pp. 55–120, 2007. View at Publisher · View at Google Scholar · View at Scopus
  49. U. Diebold, “The surface science of titanium dioxide,” Surface Science Reports, vol. 48, no. 5–8, pp. 53–229, 2003. View at Publisher · View at Google Scholar · View at Scopus
  50. T. L. Thompson and J. T. Yates Jr., “Surface science studies of the photoactivation of TiO2—new photochemical processes,” Chemical Reviews, vol. 106, no. 10, pp. 4428–4453, 2006. View at Publisher · View at Google Scholar · View at Scopus