Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2016, Article ID 3087491, 9 pages
Research Article

Adsorption Mechanism of Cu-Doped SnO2 (110) Surface toward H2 Dissolved in Power Transformer

College of Electrical and Information Engineering, Hunan University, Changsha 410082, China

Received 4 September 2016; Accepted 13 November 2016

Academic Editor: Ajayan Vinu

Copyright © 2016 Feng Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [8 citations]

The following is the list of published articles that have cited the current article.

  • Liang-Yi Wang, Wai Fen Yong, Liya E. Yu, and Tai-Shung Chung, “Design of High Efficiency PVDF-PEG Hollow Fibers for Air Filtration of Ultrafine Particles,” Journal of Membrane Science, 2017. View at Publisher · View at Google Scholar
  • Qiuqin Sun, Huisheng Ye, Qinji Jiang, Jingmin Fan, and Feng Wang, “Application of Polycrystalline SnO2 Sensor Chromatographic System to Detect Dissolved Gases in Transformer Oil,” Sensors and Actuators, B: Chemical, vol. 267, pp. 636–646, 2018. View at Publisher · View at Google Scholar
  • Ying Zhu, Xiang Zhou, Jianbing Xu, Xiaoxia Ma, Yinghua Ye, Guangcheng Yang, and Kaili Zhang, “In situ preparation of explosive embedded CuO/Al/CL20 nanoenergetic composite with enhanced reactivity,” Chemical Engineering Journal, 2018. View at Publisher · View at Google Scholar
  • Jayesh M. Sonawane, Sunil A. Patil, Prakash C. Ghosh, and Samuel B. Adeloju, “Low-cost stainless-steel wool anodes modified with polyaniline and polypyrrole for high-performance microbial fuel cells,” Journal of Power Sources, vol. 379, pp. 103–114, 2018. View at Publisher · View at Google Scholar
  • Guoxing Liang, Siegfried Schmauder, Ming Lyu, Yanling Schneider, Cheng Zhang, and Yang Han, “An Investigation of the Influence of Initial Roughness on the Friction and Wear Behavior of Ground Surfaces,” Materials, vol. 11, no. 2, pp. 237, 2018. View at Publisher · View at Google Scholar
  • Xiuyu Wang, Bonan Ding, Yanpeng Liu, Xuantong Zhu, Heng Li, Mengzhen Xia, Hui Fu, and Mingxiu Li, “Synthesis of 3D flower-like ZnSnO 3 and improvement of ethanol-sensing properties at room temperature based on nano-TiO 2 decoration and UV radiation,” Sensors and Actuators B: Chemical, 2018. View at Publisher · View at Google Scholar
  • Shuiliang Chen, Sunil A. Patil, Robert Keith Brown, and Uwe Schröder, “Strategies for optimizing the power output of microbial fuel cells: Transitioning from fundamental studies to practical implementation,” Applied Energy, vol. 233-234, pp. 15–28, 2019. View at Publisher · View at Google Scholar
  • Bing Gao, Zhiqiang Qiao, and Guangcheng Yang, “Review on Nanoexplosive Materials,” Nanomaterials in Rocket Propulsion Systems, pp. 31–79, 2019. View at Publisher · View at Google Scholar